netdev - [PATCH net-next 1/3] net: mvneta: populate supported

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <E1mfeqV-001Trr-5d@rmk-PC.armlinux.org.uk>
Date:   Wed, 27 Oct 2021 10:03:43 +0100
From:   Russell King <rmk+kernel@...linux.org.uk>
To:     "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>
Cc:     Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
        netdev@...r.kernel.org
Subject: [PATCH net-next 1/3] net: mvneta: populate supported_interfaces
 member

Populate the phy_interface_t bitmap for the Marvell mvneta driver with
interfaces modes supported by the MAC.

Signed-off-by: Russell King <rmk+kernel@...linux.org.uk>
---
 drivers/net/ethernet/marvell/mvneta.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index b6c636592dfa..7df923648bc4 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -5179,6 +5179,31 @@ static int mvneta_probe(struct platform_device *pdev)
 
 	pp->phylink_config.dev = &dev->dev;
 	pp->phylink_config.type = PHYLINK_NETDEV;
+	phy_interface_set_rgmii(pp->phylink_config.supported_interfaces);
+	__set_bit(PHY_INTERFACE_MODE_QSGMII,
+		  pp->phylink_config.supported_interfaces);
+	if (comphy) {
+		/* If a COMPHY is present, we can support any of the serdes
+		 * modes and switch between them.
+		 */
+		__set_bit(PHY_INTERFACE_MODE_SGMII,
+			  pp->phylink_config.supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_1000BASEX,
+			  pp->phylink_config.supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_2500BASEX,
+			  pp->phylink_config.supported_interfaces);
+	} else if (phy_mode == PHY_INTERFACE_MODE_2500BASEX) {
+		/* No COMPHY, with only 2500BASE-X mode supported */
+		__set_bit(PHY_INTERFACE_MODE_2500BASEX,
+			  pp->phylink_config.supported_interfaces);
+	} else if (phy_mode == PHY_INTERFACE_MODE_1000BASEX ||
+		   phy_mode == PHY_INTERFACE_MODE_SGMII) {
+		/* No COMPHY, we can switch between 1000BASE-X and SGMII */
+		__set_bit(PHY_INTERFACE_MODE_1000BASEX,
+			  pp->phylink_config.supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_SGMII,
+			  pp->phylink_config.supported_interfaces);
+	}
 
 	phylink = phylink_create(&pp->phylink_config, pdev->dev.fwnode,
 				 phy_mode, &mvneta_phylink_ops);
-- 
2.30.2