netdev - [PATCH net-next 3/3] net: mvneta: drop use of phylink_helper_basex

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 27 Oct 2021 10:03:53 +0100
From:   "Russell King (Oracle)" <rmk+kernel@...linux.org.uk>
To:     "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>
Cc:     Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
        netdev@...r.kernel.org
Subject: [PATCH net-next 3/3] net: mvneta: drop use of
 phylink_helper_basex_speed()

Now that we have a better method to select SFP interface modes, we
no longer need to use phylink_helper_basex_speed() in a driver's
validation function, and we can also get rid of our hack to indicate
both 1000base-X and 2500base-X if the comphy is present to make that
work. Remove this hack and use of phylink_helper_basex_speed().

Signed-off-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
---
 drivers/net/ethernet/marvell/mvneta.c | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 446cdd496f1b..5a7bdca22a63 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -3823,8 +3823,6 @@ static void mvneta_validate(struct phylink_config *config,
 			    unsigned long *supported,
 			    struct phylink_link_state *state)
 {
-	struct net_device *ndev = to_net_dev(config->dev);
-	struct mvneta_port *pp = netdev_priv(ndev);
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
 
 	/* We only support QSGMII, SGMII, 802.3z and RGMII modes.
@@ -3846,11 +3844,12 @@ static void mvneta_validate(struct phylink_config *config,
 	phylink_set(mask, Pause);
 
 	/* Half-duplex at speeds higher than 100Mbit is unsupported */
-	if (pp->comphy || state->interface != PHY_INTERFACE_MODE_2500BASEX) {
+	if (state->interface != PHY_INTERFACE_MODE_2500BASEX) {
 		phylink_set(mask, 1000baseT_Full);
 		phylink_set(mask, 1000baseX_Full);
 	}
-	if (pp->comphy || state->interface == PHY_INTERFACE_MODE_2500BASEX) {
+
+	if (state->interface == PHY_INTERFACE_MODE_2500BASEX) {
 		phylink_set(mask, 2500baseT_Full);
 		phylink_set(mask, 2500baseX_Full);
 	}
@@ -3865,11 +3864,6 @@ static void mvneta_validate(struct phylink_config *config,
 
 	linkmode_and(supported, supported, mask);
 	linkmode_and(state->advertising, state->advertising, mask);
-
-	/* We can only operate at 2500BaseX or 1000BaseX.  If requested
-	 * to advertise both, only report advertising at 2500BaseX.
-	 */
-	phylink_helper_basex_speed(state);
 }
 
 static void mvneta_mac_pcs_get_state(struct phylink_config *config,
-- 
2.30.2