| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20211030131001.38739-3-huangguangbin2@huawei.com>
Date: Sat, 30 Oct 2021 21:09:57 +0800
From: Guangbin Huang <huangguangbin2@...wei.com>
To: <davem@...emloft.net>, <kuba@...nel.org>, <mkubecek@...e.cz>,
<andrew@...n.ch>, <amitc@...lanox.com>, <idosch@...sch.org>,
<danieller@...dia.com>, <jesse.brandeburg@...el.com>,
<anthony.l.nguyen@...el.com>, <jdike@...toit.com>,
<richard@....at>, <anton.ivanov@...bridgegreys.com>,
<netanel@...zon.com>, <akiyano@...zon.com>, <gtzalik@...zon.com>,
<saeedb@...zon.com>, <chris.snook@...il.com>,
<ulli.kroll@...glemail.com>, <linus.walleij@...aro.org>,
<jeroendb@...gle.com>, <csully@...gle.com>,
<awogbemila@...gle.com>, <jdmason@...zu.us>,
<rain.1986.08.12@...il.com>, <zyjzyj2000@...il.com>,
<kys@...rosoft.com>, <haiyangz@...rosoft.com>, <mst@...hat.com>,
<jasowang@...hat.com>, <doshir@...are.com>,
<pv-drivers@...are.com>, <jwi@...ux.ibm.com>,
<kgraul@...ux.ibm.com>, <hca@...ux.ibm.com>, <gor@...ux.ibm.com>,
<johannes@...solutions.net>
CC: <netdev@...r.kernel.org>, <lipeng321@...wei.com>,
<chenhao288@...ilicon.com>, <huangguangbin2@...wei.com>,
<linux-s390@...r.kernel.org>
Subject: [PATCH V5 net-next 2/6] net: hns3: add support to set/get tx copybreak buf size via ethtool for hns3 driver
From: Hao Chen <chenhao288@...ilicon.com>
Tx copybreak buf size is used for tx copybreak feature, the feature is
used for small size packet or frag. It adds a queue based tx shared
bounce buffer to memcpy the small packet when the len of xmitted skb is
below tx_copybreak(value to distinguish small size and normal size),
and reduce the overhead of dma map and unmap when IOMMU is on.
Support setting it via ethtool --set-tunable parameter and getting
it via ethtool --get-tunable parameter.
Signed-off-by: Hao Chen <chenhao288@...ilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@...wei.com>
---
.../net/ethernet/hisilicon/hns3/hns3_enet.c | 4 +-
.../net/ethernet/hisilicon/hns3/hns3_enet.h | 2 +
.../ethernet/hisilicon/hns3/hns3_ethtool.c | 56 +++++++++++++++++++
3 files changed, 60 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index a2b993d62822..076631d7727d 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -5524,8 +5524,8 @@ static int hns3_reset_notify_uninit_enet(struct hnae3_handle *handle)
return 0;
}
-static int hns3_reset_notify(struct hnae3_handle *handle,
- enum hnae3_reset_notify_type type)
+int hns3_reset_notify(struct hnae3_handle *handle,
+ enum hnae3_reset_notify_type type)
{
int ret = 0;
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
index 1715c98d906d..361a6390e159 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
@@ -705,6 +705,8 @@ void hns3_set_vector_coalesce_tx_ql(struct hns3_enet_tqp_vector *tqp_vector,
u32 ql_value);
void hns3_request_update_promisc_mode(struct hnae3_handle *handle);
+int hns3_reset_notify(struct hnae3_handle *handle,
+ enum hnae3_reset_notify_type type);
#ifdef CONFIG_HNS3_DCB
void hns3_dcbnl_setup(struct hnae3_handle *handle);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
index 5ebd96f6833d..3b74b4824f1d 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
@@ -1693,6 +1693,7 @@ static int hns3_get_tunable(struct net_device *netdev,
void *data)
{
struct hns3_nic_priv *priv = netdev_priv(netdev);
+ struct hnae3_handle *h = priv->ae_handle;
int ret = 0;
switch (tuna->id) {
@@ -1703,6 +1704,9 @@ static int hns3_get_tunable(struct net_device *netdev,
case ETHTOOL_RX_COPYBREAK:
*(u32 *)data = priv->rx_copybreak;
break;
+ case ETHTOOL_TX_COPYBREAK_BUF_SIZE:
+ *(u32 *)data = h->kinfo.tx_spare_buf_size;
+ break;
default:
ret = -EOPNOTSUPP;
break;
@@ -1711,11 +1715,43 @@ static int hns3_get_tunable(struct net_device *netdev,
return ret;
}
+static int hns3_set_tx_spare_buf_size(struct net_device *netdev,
+ u32 data)
+{
+ struct hns3_nic_priv *priv = netdev_priv(netdev);
+ struct hnae3_handle *h = priv->ae_handle;
+ int ret;
+
+ if (hns3_nic_resetting(netdev))
+ return -EBUSY;
+
+ h->kinfo.tx_spare_buf_size = data;
+
+ ret = hns3_reset_notify(h, HNAE3_DOWN_CLIENT);
+ if (ret)
+ return ret;
+
+ ret = hns3_reset_notify(h, HNAE3_UNINIT_CLIENT);
+ if (ret)
+ return ret;
+
+ ret = hns3_reset_notify(h, HNAE3_INIT_CLIENT);
+ if (ret)
+ return ret;
+
+ ret = hns3_reset_notify(h, HNAE3_UP_CLIENT);
+ if (ret)
+ hns3_reset_notify(h, HNAE3_UNINIT_CLIENT);
+
+ return ret;
+}
+
static int hns3_set_tunable(struct net_device *netdev,
const struct ethtool_tunable *tuna,
const void *data)
{
struct hns3_nic_priv *priv = netdev_priv(netdev);
+ u32 old_tx_spare_buf_size, new_tx_spare_buf_size;
struct hnae3_handle *h = priv->ae_handle;
int i, ret = 0;
@@ -1733,6 +1769,26 @@ static int hns3_set_tunable(struct net_device *netdev,
for (i = h->kinfo.num_tqps; i < h->kinfo.num_tqps * 2; i++)
priv->ring[i].rx_copybreak = priv->rx_copybreak;
+ break;
+ case ETHTOOL_TX_COPYBREAK_BUF_SIZE:
+ old_tx_spare_buf_size = h->kinfo.tx_spare_buf_size;
+ new_tx_spare_buf_size = *(u32 *)data;
+ ret = hns3_set_tx_spare_buf_size(netdev, new_tx_spare_buf_size);
+ if (ret) {
+ int ret1;
+
+ netdev_warn(netdev,
+ "change tx spare buf size fail, revert to old value\n");
+ ret1 = hns3_set_tx_spare_buf_size(netdev,
+ old_tx_spare_buf_size);
+ if (ret1) {
+ netdev_err(netdev,
+ "revert to old tx spare buf size fail\n");
+ return ret1;
+ }
+
+ return ret;
+ }
break;
default:
ret = -EOPNOTSUPP;
--
2.33.0
Powered by blists - more mailing lists