| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <93440f1b9cebae08c1a4bc22f79941c2f4905e28.1635784253.git.cdleonard@gmail.com>
Date: Mon, 1 Nov 2021 18:35:00 +0200
From: Leonard Crestez <cdleonard@...il.com>
To: David Ahern <dsahern@...nel.org>, Shuah Khan <shuah@...nel.org>,
Dmitry Safonov <0x7f454c46@...il.com>,
Eric Dumazet <edumazet@...gle.com>
Cc: "David S. Miller" <davem@...emloft.net>,
Herbert Xu <herbert@...dor.apana.org.au>,
Kuniyuki Iwashima <kuniyu@...zon.co.jp>,
Hideaki YOSHIFUJI <yoshfuji@...ux-ipv6.org>,
Jakub Kicinski <kuba@...nel.org>,
Yuchung Cheng <ycheng@...gle.com>,
Francesco Ruggeri <fruggeri@...sta.com>,
Mat Martineau <mathew.j.martineau@...ux.intel.com>,
Christoph Paasch <cpaasch@...le.com>,
Ivan Delalande <colona@...sta.com>,
Priyaranjan Jha <priyarjha@...gle.com>, netdev@...r.kernel.org,
linux-crypto@...r.kernel.org, linux-kselftest@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v2 25/25] selftests: net/fcnal: Initial tcp_authopt support
Tests are mostly copied from tcp_md5 with minor changes.
It covers VRF support but only based on binding multiple servers: not
multiple keys bound to different interfaces.
Also add a specific -t tcp_authopt to run only these tests specifically.
Signed-off-by: Leonard Crestez <cdleonard@...il.com>
---
tools/testing/selftests/net/fcnal-test.sh | 249 ++++++++++++++++++++++
1 file changed, 249 insertions(+)
diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh
index 3313566ce906..d7afd9f40848 100755
--- a/tools/testing/selftests/net/fcnal-test.sh
+++ b/tools/testing/selftests/net/fcnal-test.sh
@@ -800,10 +800,252 @@ ipv4_ping()
}
################################################################################
# IPv4 TCP
+#
+# TCP Authentication Option Tests
+#
+
+# try to enable tcp_authopt sysctl
+enable_tcp_authopt()
+{
+ if [[ -e /proc/sys/net/ipv4/tcp_authopt ]]; then
+ sysctl -w net.ipv4.tcp_authopt=1
+ fi
+}
+
+# check if tcp_authopt is compiled with a client-side bind test
+has_tcp_authopt()
+{
+ run_cmd_nsb nettest -b -A ${MD5_PW} -r ${NSA_IP}
+}
+
+ipv4_tcp_authopt_novrf()
+{
+ enable_tcp_authopt
+ if ! has_tcp_authopt; then
+ echo "TCP-AO appears to be missing, skip"
+ return 0
+ fi
+
+ log_start
+ run_cmd nettest -s -A ${MD5_PW} -m ${NSB_IP} &
+ sleep 1
+ run_cmd_nsb nettest -r ${NSA_IP} -A ${MD5_PW}
+ log_test $? 0 "AO: Single address config"
+
+ log_start
+ run_cmd nettest -s &
+ sleep 1
+ run_cmd_nsb nettest -r ${NSA_IP} -A ${MD5_PW}
+ log_test $? 2 "AO: Server no config, client uses password"
+
+ log_start
+ run_cmd nettest -s -A ${MD5_PW} -m ${NSB_IP} &
+ sleep 1
+ run_cmd_nsb nettest -r ${NSA_IP} -A ${MD5_WRONG_PW}
+ log_test $? 2 "AO: Client uses wrong password"
+
+ log_start
+ run_cmd nettest -s -A ${MD5_PW} -m ${NSB_LO_IP} &
+ sleep 1
+ run_cmd_nsb nettest -r ${NSA_IP} -A ${MD5_PW}
+ log_test $? 2 "AO: Client address does not match address configured on server"
+
+ # no prefixlen for AO yet
+}
+
+ipv6_tcp_authopt_novrf()
+{
+ enable_tcp_authopt
+ if ! has_tcp_authopt; then
+ echo "TCP-AO appears to be missing, skip"
+ return 0
+ fi
+
+ log_start
+ run_cmd nettest -6 -s -A ${MD5_PW} &
+ sleep 1
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -A ${MD5_PW}
+ log_test $? 0 "AO: Simple correct config"
+
+ log_start
+ run_cmd nettest -6 -s
+ sleep 1
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -A ${MD5_PW}
+ log_test $? 2 "AO: Server no config, client uses password"
+
+ log_start
+ run_cmd nettest -6 -s -A ${MD5_PW} -m ${NSB_IP6} &
+ sleep 1
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -A ${MD5_WRONG_PW}
+ log_test $? 2 "AO: Client uses wrong password"
+
+ log_start
+ run_cmd nettest -6 -s -A ${MD5_PW} -m ${NSB_LO_IP6} &
+ sleep 1
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -A ${MD5_PW}
+ log_test $? 2 "AO: Client address does not match address configured on server"
+
+ # no prefixlen for AO yet
+}
+
+ipv4_tcp_authopt_vrf()
+{
+ enable_tcp_authopt
+ if ! has_tcp_authopt; then
+ echo "TCP-AO appears to be missing, skip"
+ return 0
+ fi
+
+ log_start
+ run_cmd nettest -s -I ${VRF} -A ${MD5_PW} &
+ sleep 1
+ run_cmd_nsb nettest -r ${NSA_IP} -A ${MD5_PW}
+ log_test $? 0 "AO: VRF: Simple config"
+
+ #
+ # duplicate config between default VRF and a VRF
+ #
+
+ log_start
+ run_cmd nettest -s -I ${VRF} -A ${MD5_PW} -m ${NSB_IP} &
+ run_cmd nettest -s -A ${MD5_WRONG_PW} -m ${NSB_IP} &
+ sleep 1
+ run_cmd_nsb nettest -r ${NSA_IP} -A ${MD5_PW}
+ log_test $? 0 "AO: VRF: Servers in default-VRF and VRF, client in VRF"
+
+ log_start
+ run_cmd nettest -s -I ${VRF} -A ${MD5_PW} -m ${NSB_IP} &
+ run_cmd nettest -s -A ${MD5_WRONG_PW} -m ${NSB_IP} &
+ sleep 1
+ run_cmd_nsc nettest -r ${NSA_IP} -A ${MD5_WRONG_PW}
+ log_test $? 0 "AO: VRF: Servers in default-VRF and VRF, client in default-VRF"
+
+ log_start
+ show_hint "Should timeout since client in default VRF uses VRF password"
+ run_cmd nettest -s -I ${VRF} -A ${MD5_PW} -m ${NSB_IP} &
+ run_cmd nettest -s -A ${MD5_WRONG_PW} -m ${NSB_IP} &
+ sleep 1
+ run_cmd_nsc nettest -r ${NSA_IP} -A ${MD5_PW}
+ log_test $? 2 "AO: VRF: Servers in default VRF and VRF, conn in default-VRF with VRF pw"
+
+ log_start
+ show_hint "Should timeout since client in VRF uses default VRF password"
+ run_cmd nettest -s -I ${VRF} -A ${MD5_PW} -m ${NSB_IP} &
+ run_cmd nettest -s -A ${MD5_WRONG_PW} -m ${NSB_IP} &
+ sleep 1
+ run_cmd_nsb nettest -r ${NSA_IP} -A ${MD5_WRONG_PW}
+ log_test $? 2 "AO: VRF: Servers in default VRF and VRF, conn in VRF with default-VRF pw"
+
+ test_ipv4_tcp_authopt_vrf__global_server__bind_ifindex0
+}
+
+test_ipv4_tcp_authopt_vrf__global_server__bind_ifindex0()
+{
+ # This particular test needs tcp_l3mdev_accept=1 for Global server to accept VRF connections
+ local old_tcp_l3mdev_accept
+ old_tcp_l3mdev_accept=$(get_sysctl net.ipv4.tcp_l3mdev_accept)
+ set_sysctl net.ipv4.tcp_l3mdev_accept=1
+
+ log_start
+ run_cmd nettest -s -A ${MD5_PW} --force-bind-key-ifindex &
+ sleep 1
+ run_cmd_nsb nettest -r ${NSA_IP} -A ${MD5_PW}
+ log_test $? 2 "AO: VRF: Global server, Key bound to ifindex=0 rejects VRF connection"
+
+ log_start
+ run_cmd nettest -s -A ${MD5_PW} --force-bind-key-ifindex &
+ sleep 1
+ run_cmd_nsc nettest -r ${NSA_IP} -A ${MD5_PW}
+ log_test $? 0 "AO: VRF: Global server, key bound to ifindex=0 accepts non-VRF connection"
+ log_start
+
+ run_cmd nettest -s -A ${MD5_PW} --no-bind-key-ifindex &
+ sleep 1
+ run_cmd_nsb nettest -r ${NSA_IP} -A ${MD5_PW}
+ log_test $? 0 "AO: VRF: Global server, key not bound to ifindex accepts VRF connection"
+
+ log_start
+ run_cmd nettest -s -A ${MD5_PW} --no-bind-key-ifindex &
+ sleep 1
+ run_cmd_nsc nettest -r ${NSA_IP} -A ${MD5_PW}
+ log_test $? 0 "AO: VRF: Global server, key not bound to ifindex accepts non-VRF connection"
+
+ # restore value
+ set_sysctl net.ipv4.tcp_l3mdev_accept="$old_tcp_l3mdev_accept"
+}
+
+ipv6_tcp_authopt_vrf()
+{
+ enable_tcp_authopt
+ if ! has_tcp_authopt; then
+ echo "TCP-AO appears to be missing, skip"
+ return 0
+ fi
+
+ log_start
+ run_cmd nettest -6 -s -I ${VRF} -A ${MD5_PW} &
+ sleep 1
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -A ${MD5_PW}
+ log_test $? 0 "AO: VRF: Simple config"
+
+ #
+ # duplicate config between default VRF and a VRF
+ #
+
+ log_start
+ run_cmd nettest -6 -s -I ${VRF} -A ${MD5_PW} -m ${NSB_IP6} &
+ run_cmd nettest -6 -s -A ${MD5_WRONG_PW} -m ${NSB_IP6} &
+ sleep 1
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -A ${MD5_PW}
+ log_test $? 0 "AO: VRF: Servers in default-VRF and VRF, client in VRF"
+
+ log_start
+ run_cmd nettest -6 -s -I ${VRF} -A ${MD5_PW} -m ${NSB_IP6} &
+ run_cmd nettest -6 -s -A ${MD5_WRONG_PW} -m ${NSB_IP6} &
+ sleep 1
+ run_cmd_nsc nettest -6 -r ${NSA_IP6} -A ${MD5_WRONG_PW}
+ log_test $? 0 "AO: VRF: Servers in default-VRF and VRF, client in default-VRF"
+
+ log_start
+ show_hint "Should timeout since client in default VRF uses VRF password"
+ run_cmd nettest -6 -s -I ${VRF} -A ${MD5_PW} -m ${NSB_IP6} &
+ run_cmd nettest -6 -s -A ${MD5_WRONG_PW} -m ${NSB_IP6} &
+ sleep 1
+ run_cmd_nsc nettest -6 -r ${NSA_IP6} -A ${MD5_PW}
+ log_test $? 2 "AO: VRF: Servers in default VRF and VRF, conn in default-VRF with VRF pw"
+
+ log_start
+ show_hint "Should timeout since client in VRF uses default VRF password"
+ run_cmd nettest -6 -s -I ${VRF} -A ${MD5_PW} -m ${NSB_IP6} &
+ run_cmd nettest -6 -s -A ${MD5_WRONG_PW} -m ${NSB_IP6} &
+ sleep 1
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -A ${MD5_WRONG_PW}
+ log_test $? 2 "AO: VRF: Servers in default VRF and VRF, conn in VRF with default-VRF pw"
+}
+
+only_tcp_authopt()
+{
+ log_section "TCP Authentication Option"
+
+ setup
+ set_sysctl net.ipv4.tcp_l3mdev_accept=0
+ log_subsection "TCP-AO IPv4 no VRF"
+ ipv4_tcp_authopt_novrf
+ log_subsection "TCP-AO IPv6 no VRF"
+ ipv6_tcp_authopt_novrf
+
+ setup "yes"
+ set_sysctl net.ipv4.tcp_l3mdev_accept=0
+ log_subsection "TCP-AO IPv4 VRF"
+ ipv4_tcp_authopt_vrf
+ log_subsection "TCP-AO IPv6 VRF"
+ ipv6_tcp_authopt_vrf
+}
+
#
# MD5 tests without VRF
#
ipv4_tcp_md5_novrf()
{
@@ -1185,10 +1427,11 @@ ipv4_tcp_novrf()
show_hint "Should fail 'Connection refused'"
run_cmd nettest -d ${NSA_DEV} -r ${a}
log_test_addr ${a} $? 1 "No server, device client, local conn"
ipv4_tcp_md5_novrf
+ ipv4_tcp_authopt_novrf
}
ipv4_tcp_vrf()
{
local a
@@ -1239,10 +1482,12 @@ ipv4_tcp_vrf()
run_cmd nettest -r ${a} -d ${NSA_DEV}
log_test_addr ${a} $? 1 "Global server, local connection"
# run MD5 tests
ipv4_tcp_md5
+ # run AO tests
+ ipv6_tcp_md5_vrf
#
# enable VRF global server
#
log_subsection "VRF Global server enabled"
@@ -2648,10 +2893,11 @@ ipv6_tcp_novrf()
run_cmd nettest -6 -d ${NSA_DEV} -r ${a}
log_test_addr ${a} $? 1 "No server, device client, local conn"
done
ipv6_tcp_md5_novrf
+ ipv6_tcp_authopt_novrf
}
ipv6_tcp_vrf()
{
local a
@@ -2718,10 +2964,12 @@ ipv6_tcp_vrf()
run_cmd nettest -6 -r ${a} -d ${NSA_DEV}
log_test_addr ${a} $? 1 "Global server, local connection"
# run MD5 tests
ipv6_tcp_md5
+ # run AO tests
+ ipv6_tcp_authopt_vrf
#
# enable VRF global server
#
log_subsection "VRF Global server enabled"
@@ -4062,10 +4310,11 @@ do
ipv6_bind|bind6) ipv6_addr_bind;;
ipv6_runtime) ipv6_runtime;;
ipv6_netfilter) ipv6_netfilter;;
use_cases) use_cases;;
+ tcp_authopt) only_tcp_authopt;;
# setup namespaces and config, but do not run any tests
setup) setup; exit 0;;
vrf_setup) setup "yes"; exit 0;;
--
2.25.1
Powered by blists - more mailing lists