| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20211103104511.sgynsapyqlsamovi@skbuf>
Date: Wed, 3 Nov 2021 10:45:12 +0000
From: Vladimir Oltean <vladimir.oltean@....com>
To: Clément Léger <clement.leger@...tlin.com>
CC: "David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Claudiu Manoil <claudiu.manoil@....com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
"UNGLinuxDriver@...rochip.com" <UNGLinuxDriver@...rochip.com>,
Andrew Lunn <andrew@...n.ch>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>
Subject: Re: [PATCH v2 2/6] dt-bindings: net: convert mscc,vsc7514-switch
bindings to yaml
On Wed, Nov 03, 2021 at 10:19:39AM +0100, Clément Léger wrote:
> Convert existing bindings to yaml format. In the same time, remove non
> exiting properties ("inj" interrupt) and add fdma.
>
> Signed-off-by: Clément Léger <clement.leger@...tlin.com>
> ---
> .../bindings/net/mscc,vsc7514-switch.yaml | 184 ++++++++++++++++++
> .../devicetree/bindings/net/mscc-ocelot.txt | 83 --------
> 2 files changed, 184 insertions(+), 83 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml
> delete mode 100644 Documentation/devicetree/bindings/net/mscc-ocelot.txt
>
> diff --git a/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml b/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml
> new file mode 100644
> index 000000000000..0c96eabf9d2d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml
> @@ -0,0 +1,184 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/mscc,vsc7514-switch.yaml
> +$schema: http://devicetree.org/meta-schemas/core.yaml
> +
> +title: Microchip VSC7514 Ethernet switch controller
> +
> +maintainers:
> + - Vladimir Oltean <vladimir.oltean@....com>
> + - Claudiu Manoil <claudiu.manoil@....com>
> + - Alexandre Belloni <alexandre.belloni@...tlin.com>
> +
> +description: |
> + The VSC7514 Industrial IoT Ethernet switch contains four integrated dual media
> + 10/100/1000BASE-T PHYs, two 1G SGMII/SerDes, two 1G/2.5G SGMII/SerDes, and an
> + option for either a 1G/2.5G SGMII/SerDes Node Processor Interface (NPI) or a
> + PCIe interface for external CPU connectivity. The NPI/PCIe can operate as a
> + standard Ethernet port.
Technically any port can serve as NPI, not just the SERDES ones. People
are even using internal PHY ports as NPI.
https://patchwork.kernel.org/project/netdevbpf/patch/20210814025003.2449143-11-colin.foster@in-advantage.com/#24381029
Honestly I would not bother talking about NPI, it is confusing to see it here.
Anything having to do with the NPI port is the realm of DSA.
Just say how the present driver expects to control the device, don't
just copy stuff from marketing slides. In this case PCIe is irrelevant
too, this driver is for a platform device, and it only runs on the
embedded processor as far as I can tell.
> +
> + The device provides a rich set of Industrial Ethernet switching features such
> + as fast protection switching, 1588 precision time protocol, and synchronous
> + Ethernet. Advanced TCAM-based VLAN and QoS processing enable delivery of
> + differentiated services. Security is assured through frame processing using
> + Microsemi’s TCAM-based Versatile Content Aware Processor.
Above you say Microchip, and here you say Microsemi.
> +
> + In addition, the device contains a powerful 500 MHz CPU enabling full
> + management of the switch.
~powerful~
> +
> +properties:
> + $nodename:
> + pattern: "^switch@[0-9a-f]+$"
> +
> + compatible:
> + const: mscc,vsc7514-switch
> +
> + reg:
> + items:
> + - description: system target
> + - description: rewriter target
> + - description: qs target
> + - description: PTP target
> + - description: Port0 target
> + - description: Port1 target
> + - description: Port2 target
> + - description: Port3 target
> + - description: Port4 target
> + - description: Port5 target
> + - description: Port6 target
> + - description: Port7 target
> + - description: Port8 target
> + - description: Port9 target
> + - description: Port10 target
> + - description: QSystem target
> + - description: Analyzer target
> + - description: S0 target
> + - description: S1 target
> + - description: S2 target
> + - description: fdma target
> +
> + reg-names:
> + items:
> + - const: sys
> + - const: rew
> + - const: qs
> + - const: ptp
> + - const: port0
> + - const: port1
> + - const: port2
> + - const: port3
> + - const: port4
> + - const: port5
> + - const: port6
> + - const: port7
> + - const: port8
> + - const: port9
> + - const: port10
> + - const: qsys
> + - const: ana
> + - const: s0
> + - const: s1
> + - const: s2
> + - const: fdma
> +
> + interrupts:
> + minItems: 1
> + items:
> + - description: PTP ready
> + - description: register based extraction
> + - description: frame dma based extraction
> +
> + interrupt-names:
> + minItems: 1
> + items:
> + - const: ptp_rdy
> + - const: xtr
> + - const: fdma
> +
> + ethernet-ports:
> + type: object
> + patternProperties:
> + "^port@[0-9a-f]+$":
> + type: object
> + description: Ethernet ports handled by the switch
> +
> + allOf:
> + - $ref: ethernet-controller.yaml#
I'm pretty sure Rob will comment that this can be simplified to:
$ref: ethernet-controller.yaml#
without the allOf: and "-".
> +
> + properties:
> + '#address-cells':
> + const: 1
> + '#size-cells':
> + const: 0
> +
> + reg:
> + description: Switch port number
> +
> + phy-handle: true
> +
> + mac-address: true
> +
> + required:
> + - reg
> + - phy-handle
Shouldn't there be additionalProperties: false for the port node as well?
And actually, phy-handle is not strictly required, if you have a
fixed-link. I think you should use oneOf.
And you know what else is required? phy-mode. See commits e6e12df625f2
("net: mscc: ocelot: convert to phylink") and eba54cbb92d2 ("MIPS: mscc:
ocelot: mark the phy-mode for internal PHY ports").
> +
> +required:
> + - compatible
> + - reg
> + - reg-names
> + - interrupts
> + - interrupt-names
> + - ethernet-ports
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + switch@...0000 {
> + compatible = "mscc,vsc7514-switch";
> + reg = <0x1010000 0x10000>,
> + <0x1030000 0x10000>,
> + <0x1080000 0x100>,
> + <0x10e0000 0x10000>,
> + <0x11e0000 0x100>,
> + <0x11f0000 0x100>,
> + <0x1200000 0x100>,
> + <0x1210000 0x100>,
> + <0x1220000 0x100>,
> + <0x1230000 0x100>,
> + <0x1240000 0x100>,
> + <0x1250000 0x100>,
> + <0x1260000 0x100>,
> + <0x1270000 0x100>,
> + <0x1280000 0x100>,
> + <0x1800000 0x80000>,
> + <0x1880000 0x10000>,
> + <0x1040000 0x10000>,
> + <0x1050000 0x10000>,
> + <0x1060000 0x10000>,
> + <0x1a0 0x1c4>;
> + reg-names = "sys", "rew", "qs", "ptp", "port0", "port1",
> + "port2", "port3", "port4", "port5", "port6",
> + "port7", "port8", "port9", "port10", "qsys",
> + "ana", "s0", "s1", "s2", "fdma";
> + interrupts = <18 21 16>;
> + interrupt-names = "ptp_rdy", "xtr", "fdma";
> +
> + ethernet-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port0: port@0 {
> + reg = <0>;
> + phy-handle = <&phy0>;
> + };
> + port1: port@1 {
> + reg = <1>;
> + phy-handle = <&phy1>;
> + };
> + };
> + };
> +
> +...
> +# vim: set ts=2 sw=2 sts=2 tw=80 et cc=80 ft=yaml :
> diff --git a/Documentation/devicetree/bindings/net/mscc-ocelot.txt b/Documentation/devicetree/bindings/net/mscc-ocelot.txt
> deleted file mode 100644
> index 3b6290b45ce5..000000000000
> --- a/Documentation/devicetree/bindings/net/mscc-ocelot.txt
> +++ /dev/null
> @@ -1,83 +0,0 @@
> -Microsemi Ocelot network Switch
> -===============================
> -
> -The Microsemi Ocelot network switch can be found on Microsemi SoCs (VSC7513,
> -VSC7514)
> -
> -Required properties:
> -- compatible: Should be "mscc,vsc7514-switch"
> -- reg: Must contain an (offset, length) pair of the register set for each
> - entry in reg-names.
> -- reg-names: Must include the following entries:
> - - "sys"
> - - "rew"
> - - "qs"
> - - "ptp" (optional due to backward compatibility)
> - - "qsys"
> - - "ana"
> - - "portX" with X from 0 to the number of last port index available on that
> - switch
> -- interrupts: Should contain the switch interrupts for frame extraction,
> - frame injection and PTP ready.
> -- interrupt-names: should contain the interrupt names: "xtr", "inj". Can contain
> - "ptp_rdy" which is optional due to backward compatibility.
> -- ethernet-ports: A container for child nodes representing switch ports.
> -
> -The ethernet-ports container has the following properties
> -
> -Required properties:
> -
> -- #address-cells: Must be 1
> -- #size-cells: Must be 0
> -
> -Each port node must have the following mandatory properties:
> -- reg: Describes the port address in the switch
> -
> -Port nodes may also contain the following optional standardised
> -properties, described in binding documents:
> -
> -- phy-handle: Phandle to a PHY on an MDIO bus. See
> - Documentation/devicetree/bindings/net/ethernet.txt for details.
> -
> -Example:
> -
> - switch@...0000 {
> - compatible = "mscc,vsc7514-switch";
> - reg = <0x1010000 0x10000>,
> - <0x1030000 0x10000>,
> - <0x1080000 0x100>,
> - <0x10e0000 0x10000>,
> - <0x11e0000 0x100>,
> - <0x11f0000 0x100>,
> - <0x1200000 0x100>,
> - <0x1210000 0x100>,
> - <0x1220000 0x100>,
> - <0x1230000 0x100>,
> - <0x1240000 0x100>,
> - <0x1250000 0x100>,
> - <0x1260000 0x100>,
> - <0x1270000 0x100>,
> - <0x1280000 0x100>,
> - <0x1800000 0x80000>,
> - <0x1880000 0x10000>;
> - reg-names = "sys", "rew", "qs", "ptp", "port0", "port1",
> - "port2", "port3", "port4", "port5", "port6",
> - "port7", "port8", "port9", "port10", "qsys",
> - "ana";
> - interrupts = <18 21 22>;
> - interrupt-names = "ptp_rdy", "xtr", "inj";
> -
> - ethernet-ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - port0: port@0 {
> - reg = <0>;
> - phy-handle = <&phy0>;
> - };
> - port1: port@1 {
> - reg = <1>;
> - phy-handle = <&phy1>;
> - };
> - };
> - };
> --
> 2.33.0
>
Powered by blists - more mailing lists