netdev - Re: [PATCH v3 1/2] wcn36xx: populate band before determining rate on RX

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAMZdPi8SnET8x0CBOyzSNcXroy=ctb_k-qE=bqpx_8027vVTTA@mail.gmail.com>
Date:   Thu, 4 Nov 2021 19:57:02 +0100
From:   Loic Poulain <loic.poulain@...aro.org>
To:     Benjamin Li <benl@...areup.com>
Cc:     Kalle Valo <kvalo@...eaurora.org>,
        "Bryan O'Donoghue" <bryan.odonoghue@...aro.org>,
        linux-arm-msm@...r.kernel.org,
        "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>, wcn36xx@...ts.infradead.org,
        linux-wireless@...r.kernel.org, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 1/2] wcn36xx: populate band before determining rate on RX

On Thu, 4 Nov 2021 at 02:05, Benjamin Li <benl@...areup.com> wrote:
>
> status.band is used in determination of status.rate -- for 5GHz on legacy
> rates there is a linear shift between the BD descriptor's rate field and
> the wcn36xx driver's rate table (wcn_5ghz_rates).
>
> We have a special clause to populate status.band for hardware scan offload
> frames. However, this block occurs after status.rate is already populated.
> Correctly handle this dependency by moving the band block before the rate
> block.
>
> This patch addresses kernel warnings & missing scan results for 5GHz APs
> that send their beacons/probe responses at the higher four legacy rates
> (24-54 Mbps), when using hardware scan offload:
>
>   ------------[ cut here ]------------
>   WARNING: CPU: 0 PID: 0 at net/mac80211/rx.c:4532 ieee80211_rx_napi+0x744/0x8d8
>   Modules linked in: wcn36xx [...]
>   CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W         4.19.107-g73909fa #1
>   Hardware name: Square, Inc. T2 (all variants) (DT)
>   Call trace:
>   dump_backtrace+0x0/0x148
>   show_stack+0x14/0x1c
>   dump_stack+0xb8/0xf0
>   __warn+0x2ac/0x2d8
>   warn_slowpath_null+0x44/0x54
>   ieee80211_rx_napi+0x744/0x8d8
>   ieee80211_tasklet_handler+0xa4/0xe0
>   tasklet_action_common+0xe0/0x118
>   tasklet_action+0x20/0x28
>   __do_softirq+0x108/0x1ec
>   irq_exit+0xd4/0xd8
>   __handle_domain_irq+0x84/0xbc
>   gic_handle_irq+0x4c/0xb8
>   el1_irq+0xe8/0x190
>   lpm_cpuidle_enter+0x220/0x260
>   cpuidle_enter_state+0x114/0x1c0
>   cpuidle_enter+0x34/0x48
>   do_idle+0x150/0x268
>   cpu_startup_entry+0x20/0x24
>   rest_init+0xd4/0xe0
>   start_kernel+0x398/0x430
>   ---[ end trace ae28cb759352b403 ]---
>
> Fixes: 8a27ca394782 ("wcn36xx: Correct band/freq reporting on RX")
> Signed-off-by: Benjamin Li <benl@...areup.com>

Tested-by: Loic Poulain <loic.poulain@...aro.org>