| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20211108214918.25222-1-kabel@kernel.org>
Date: Mon, 8 Nov 2021 22:49:18 +0100
From: Marek Behún <kabel@...nel.org>
To: netdev@...r.kernel.org
Cc: Jakub Kicinski <kuba@...nel.org>,
David Miller <davem@...emloft.net>,
Marek Behún <kabel@...nel.org>,
Russell King <rmk+kernel@...linux.org.uk>
Subject: [PATCH net] net: marvell: mvpp2: Fix wrong SerDes reconfiguration order
Commit bfe301ebbc94 ("net: mvpp2: convert to use
mac_prepare()/mac_finish()") introduced a bug wherein it leaves the MAC
RESET register asserted after mac_finish(), due to wrong order of
function calls.
Before it was:
.mac_config()
mvpp22_mode_reconfigure()
assert reset
mvpp2_xlg_config()
deassert reset
Now it is:
.mac_prepare()
.mac_config()
mvpp2_xlg_config()
deassert reset
.mac_finish()
mvpp2_xlg_config()
assert reset
Obviously this is wrong.
This bug is triggered when phylink tries to change the PHY interface
mode from a GMAC mode (sgmii, 1000base-x, 2500base-x) to XLG mode
(10gbase-r, xaui). The XLG mode does not work since reset is left
asserted. Only after
ifconfig down && ifconfig up
is called will the XLG mode work.
Move the call to mvpp22_mode_reconfigure() to .mac_prepare()
implementation. Since some of the subsequent functions need to know
whether the interface is being changed, we unfortunately also need to
pass around the new interface mode before setting port->phy_interface.
Fixes: bfe301ebbc94 ("net: mvpp2: convert to use mac_prepare()/mac_finish()")
Signed-off-by: Marek Behún <kabel@...nel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
---
.../net/ethernet/marvell/mvpp2/mvpp2_main.c | 38 ++++++++++---------
1 file changed, 20 insertions(+), 18 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 587def69a6f7..2b18d89d9756 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -1605,7 +1605,7 @@ static void mvpp22_gop_fca_set_periodic_timer(struct mvpp2_port *port)
mvpp22_gop_fca_enable_periodic(port, true);
}
-static int mvpp22_gop_init(struct mvpp2_port *port)
+static int mvpp22_gop_init(struct mvpp2_port *port, phy_interface_t interface)
{
struct mvpp2 *priv = port->priv;
u32 val;
@@ -1613,7 +1613,7 @@ static int mvpp22_gop_init(struct mvpp2_port *port)
if (!priv->sysctrl_base)
return 0;
- switch (port->phy_interface) {
+ switch (interface) {
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_ID:
case PHY_INTERFACE_MODE_RGMII_RXID:
@@ -1743,15 +1743,15 @@ static void mvpp22_gop_setup_irq(struct mvpp2_port *port)
* lanes by the physical layer. This is why configurations like
* "PPv2 (2500BaseX) - COMPHY (2500SGMII)" are valid.
*/
-static int mvpp22_comphy_init(struct mvpp2_port *port)
+static int mvpp22_comphy_init(struct mvpp2_port *port,
+ phy_interface_t interface)
{
int ret;
if (!port->comphy)
return 0;
- ret = phy_set_mode_ext(port->comphy, PHY_MODE_ETHERNET,
- port->phy_interface);
+ ret = phy_set_mode_ext(port->comphy, PHY_MODE_ETHERNET, interface);
if (ret)
return ret;
@@ -2172,7 +2172,8 @@ static void mvpp22_pcs_reset_assert(struct mvpp2_port *port)
writel(val & ~MVPP22_XPCS_CFG0_RESET_DIS, xpcs + MVPP22_XPCS_CFG0);
}
-static void mvpp22_pcs_reset_deassert(struct mvpp2_port *port)
+static void mvpp22_pcs_reset_deassert(struct mvpp2_port *port,
+ phy_interface_t interface)
{
struct mvpp2 *priv = port->priv;
void __iomem *mpcs, *xpcs;
@@ -2184,7 +2185,7 @@ static void mvpp22_pcs_reset_deassert(struct mvpp2_port *port)
mpcs = priv->iface_base + MVPP22_MPCS_BASE(port->gop_id);
xpcs = priv->iface_base + MVPP22_XPCS_BASE(port->gop_id);
- switch (port->phy_interface) {
+ switch (interface) {
case PHY_INTERFACE_MODE_10GBASER:
val = readl(mpcs + MVPP22_MPCS_CLK_RESET);
val |= MAC_CLK_RESET_MAC | MAC_CLK_RESET_SD_RX |
@@ -4529,7 +4530,8 @@ static int mvpp2_poll(struct napi_struct *napi, int budget)
return rx_done;
}
-static void mvpp22_mode_reconfigure(struct mvpp2_port *port)
+static void mvpp22_mode_reconfigure(struct mvpp2_port *port,
+ phy_interface_t interface)
{
u32 ctrl3;
@@ -4540,18 +4542,18 @@ static void mvpp22_mode_reconfigure(struct mvpp2_port *port)
mvpp22_pcs_reset_assert(port);
/* comphy reconfiguration */
- mvpp22_comphy_init(port);
+ mvpp22_comphy_init(port, interface);
/* gop reconfiguration */
- mvpp22_gop_init(port);
+ mvpp22_gop_init(port, interface);
- mvpp22_pcs_reset_deassert(port);
+ mvpp22_pcs_reset_deassert(port, interface);
if (mvpp2_port_supports_xlg(port)) {
ctrl3 = readl(port->base + MVPP22_XLG_CTRL3_REG);
ctrl3 &= ~MVPP22_XLG_CTRL3_MACMODESELECT_MASK;
- if (mvpp2_is_xlg(port->phy_interface))
+ if (mvpp2_is_xlg(interface))
ctrl3 |= MVPP22_XLG_CTRL3_MACMODESELECT_10G;
else
ctrl3 |= MVPP22_XLG_CTRL3_MACMODESELECT_GMAC;
@@ -4559,7 +4561,7 @@ static void mvpp22_mode_reconfigure(struct mvpp2_port *port)
writel(ctrl3, port->base + MVPP22_XLG_CTRL3_REG);
}
- if (mvpp2_port_supports_xlg(port) && mvpp2_is_xlg(port->phy_interface))
+ if (mvpp2_port_supports_xlg(port) && mvpp2_is_xlg(interface))
mvpp2_xlg_max_rx_size_set(port);
else
mvpp2_gmac_max_rx_size_set(port);
@@ -4579,7 +4581,7 @@ static void mvpp2_start_dev(struct mvpp2_port *port)
mvpp2_interrupts_enable(port);
if (port->priv->hw_version >= MVPP22)
- mvpp22_mode_reconfigure(port);
+ mvpp22_mode_reconfigure(port, port->phy_interface);
if (port->phylink) {
phylink_start(port->phylink);
@@ -6444,6 +6446,9 @@ static int mvpp2__mac_prepare(struct phylink_config *config, unsigned int mode,
mvpp22_gop_mask_irq(port);
phy_power_off(port->comphy);
+
+ /* Reconfigure the serdes lanes */
+ mvpp22_mode_reconfigure(port, interface);
}
}
@@ -6498,9 +6503,6 @@ static int mvpp2_mac_finish(struct phylink_config *config, unsigned int mode,
port->phy_interface != interface) {
port->phy_interface = interface;
- /* Reconfigure the serdes lanes */
- mvpp22_mode_reconfigure(port);
-
/* Unmask interrupts */
mvpp22_gop_unmask_irq(port);
}
@@ -6961,7 +6963,7 @@ static int mvpp2_port_probe(struct platform_device *pdev,
* driver does this, we can remove this code.
*/
if (port->comphy) {
- err = mvpp22_comphy_init(port);
+ err = mvpp22_comphy_init(port, port->phy_interface);
if (err == 0)
phy_power_off(port->comphy);
}
--
2.32.0
Powered by blists - more mailing lists