| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <YY4WfQrExICZ6jI+@krava>
Date: Fri, 12 Nov 2021 08:23:41 +0100
From: Jiri Olsa <jolsa@...hat.com>
To: Andrii Nakryiko <andrii.nakryiko@...il.com>
Cc: Alexei Starovoitov <ast@...nel.org>,
Daniel Borkmann <daniel@...earbox.net>,
Andrii Nakryiko <andrii@...nel.org>,
Networking <netdev@...r.kernel.org>, bpf <bpf@...r.kernel.org>,
Martin KaFai Lau <kafai@...com>,
Song Liu <songliubraving@...com>, Yonghong Song <yhs@...com>,
John Fastabend <john.fastabend@...il.com>,
KP Singh <kpsingh@...omium.org>
Subject: Re: [RFC bpf-next 0/2] bpf: Fix BTF data for modules
On Tue, Nov 09, 2021 at 03:23:25PM -0800, Andrii Nakryiko wrote:
> On Sun, Nov 7, 2021 at 6:57 AM Jiri Olsa <jolsa@...hat.com> wrote:
> >
> > On Tue, Nov 02, 2021 at 03:14:52PM +0100, Jiri Olsa wrote:
> > > On Mon, Nov 01, 2021 at 04:14:29PM -0700, Andrii Nakryiko wrote:
> > > > On Thu, Oct 28, 2021 at 12:12 PM Jiri Olsa <jolsa@...hat.com> wrote:
> > > > >
> > > > > On Wed, Oct 27, 2021 at 08:18:11PM +0200, Jiri Olsa wrote:
> > > > > > On Wed, Oct 27, 2021 at 10:53:55AM -0700, Andrii Nakryiko wrote:
> > > > > > > On Wed, Oct 27, 2021 at 1:53 AM Jiri Olsa <jolsa@...hat.com> wrote:
> > > > > > > >
> > > > > > > > On Tue, Oct 26, 2021 at 09:12:31PM -0700, Andrii Nakryiko wrote:
> > > > > > > > > On Tue, Oct 26, 2021 at 5:03 AM Jiri Olsa <jolsa@...hat.com> wrote:
> > > > > > > > > >
> > > > > > > > > > On Mon, Oct 25, 2021 at 09:54:48PM -0700, Andrii Nakryiko wrote:
> > > > > > > > > > > On Sat, Oct 23, 2021 at 5:05 AM Jiri Olsa <jolsa@...hat.com> wrote:
> > > > > > > > > > > >
> > > > > > > > > > > > hi,
> > > > > > > > > > > > I'm trying to enable BTF for kernel module in fedora,
> > > > > > > > > > > > and I'm getting big increase on modules sizes on s390x arch.
> > > > > > > > > > > >
> > > > > > > > > > > > Size of modules in total - kernel dir under /lib/modules/VER/
> > > > > > > > > > > > from kernel-core and kernel-module packages:
> > > > > > > > > > > >
> > > > > > > > > > > > current new
> > > > > > > > > > > > aarch64 60M 76M
> > > > > > > > > > > > ppc64le 53M 66M
> > > > > > > > > > > > s390x 21M 41M
> > > > > > > > > > > > x86_64 64M 79M
> > > > > > > > > > > >
> > > > > > > > > > > > The reason for higher increase on s390x was that dedup algorithm
> > > > > > > > > > > > did not detect some of the big kernel structs like 'struct module',
> > > > > > > > > > > > so they are duplicated in the kernel module BTF data. The s390x
> > > > > > > > > > > > has many small modules that increased significantly in size because
> > > > > > > > > > > > of that even after compression.
> > > > > > > > > > > >
> > > > > > > > > > > > First issues was that the '--btf_gen_floats' option is not passed
> > > > > > > > > > > > to pahole for kernel module BTF generation.
> > > > > > > > > > > >
> > > > > > > > > > > > The other problem is more tricky and is the reason why this patchset
> > > > > > > > > > > > is RFC ;-)
> > > > > > > > > > > >
> > > > > > > > > > > > The s390x compiler generates multiple definitions of the same struct
> > > > > > > > > > > > and dedup algorithm does not seem to handle this at the moment.
> > > > > > > > > > > >
> > > > > > > > > > > > I put the debuginfo and btf dump of the s390x pnet.ko module in here:
> > > > > > > > > > > > http://people.redhat.com/~jolsa/kmodbtf/
> > > > > > > > > > > >
> > > > > > > > > > > > Please let me know if you'd like to see other info/files.
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > Hard to tell what's going on without vmlinux itself. Can you upload a
> > > > > > > > > > > corresponding kernel image with BTF in it?
> > > > > > > > > >
> > > > > > > > > > sure, uploaded
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > > vmlinux.btfdump:
> > > > > > > > >
> > > > > > > > > [174] FLOAT 'float' size=4
> > > > > > > > > [175] FLOAT 'double' size=8
> > > > > > > > >
> > > > > > > > > VS
> > > > > > > > >
> > > > > > > > > pnet.btfdump:
> > > > > > > > >
> > > > > > > > > [89318] INT 'float' size=4 bits_offset=0 nr_bits=32 encoding=(none)
> > > > > > > > > [89319] INT 'double' size=8 bits_offset=0 nr_bits=64 encoding=(none)
> > > > > > > >
> > > > > > > > ugh, that's with no fix applied, sry
> > > > > > > >
> > > > > > > > I applied the first patch and uploaded new files
> > > > > > > >
> > > > > > > > now when I compare the 'module' struct from vmlinux:
> > > > > > > >
> > > > > > > > [885] STRUCT 'module' size=1280 vlen=70
> > > > > > > >
> > > > > > > > and same one from pnet.ko:
> > > > > > > >
> > > > > > > > [89323] STRUCT 'module' size=1280 vlen=70
> > > > > > > >
> > > > > > > > they seem to completely match, all the fields
> > > > > > > > and yet it still appears in the kmod's BTF
> > > > > > > >
> > > > > > >
> > > > > > > Ok, now struct module is identical down to the types referenced from
> > > > > > > the fields, which means it should have been deduplicated completely.
> > > > > > > This will require a more time-consuming debugging, though, so I'll put
> > > > > > > it on my TODO list for now. If you get to this earlier, see where the
> > > > > > > equivalence check fails in btf_dedup (sprinkle debug outputs around to
> > > > > > > see what's going on).
> > > > > >
> > > > > > it failed for me on that hypot_type_id check where I did fix,
> > > > > > I thought it's the issue of multiple same struct in the kmod,
> > > > > > but now I see I might have confused cannon_id with cand_id ;-)
> > > > > > I'll check more on this
> > > > >
> > > > > with more checking I got to the same conclusion as before,
> > > > > now maybe with little more details ;-)
> > > > >
> > > > > the problem seems to be that in some cases the module BTF
> > > > > data stores same structs under new/different IDs, while the
> > > > > kernel BTF data is already dedup-ed
> > > > >
> > > > > the dedup algo keeps hypot_map of kernel IDs to kmod IDs,
> > > > > and in my case it will get to the point that the kernel ID
> > > > > is already 'known' and points to certain kmod ID 'A', but it
> > > > > is also equiv to another kmod ID 'B' (so kmod ID 'A' and 'B'
> > > > > are equiv structs) but the dedup will claim as not equiv
> > > > >
> > > > >
> > > > > This is where the dedup fails for me on that s390 data:
> > > > >
> > > > > The pt_regs is defined as:
> > > > >
> > > > > struct pt_regs
> > > > > {
> > > > > union {
> > > > > user_pt_regs user_regs;
> > > > > struct {
> > > > > unsigned long args[1];
> > > > > psw_t psw;
> > > > > unsigned long gprs[NUM_GPRS];
> > > > > };
> > > > > };
> > > > > ...
> > > > > };
> > > > >
> > > > > considering just the first union:
> > > > >
> > > > > [186] UNION '(anon)' size=152 vlen=2
> > > > > 'user_regs' type_id=183 bits_offset=0
> > > > > '(anon)' type_id=181 bits_offset=0
> > > > >
> > > > > [91251] UNION '(anon)' size=152 vlen=2
> > > > > 'user_regs' type_id=91247 bits_offset=0
> > > > > '(anon)' type_id=91250 bits_offset=0
> > > > >
> > > > >
> > > > > ---------------------------------------------------------------
> > > > >
> > > > > Comparing the first member 'user_regs':
> > > > >
> > > > > struct pt_regs
> > > > > {
> > > > > union {
> > > > > ---> user_pt_regs user_regs;
> > > > > struct {
> > > > > unsigned long args[1];
> > > > > psw_t psw;
> > > > > unsigned long gprs[NUM_GPRS];
> > > > > };
> > > > > };
> > > > >
> > > > > Which looks like:
> > > > >
> > > > > typedef struct {
> > > > > unsigned long args[1];
> > > > > psw_t psw;
> > > > > unsigned long gprs[NUM_GPRS];
> > > > > } user_pt_regs;
> > > > >
> > > > >
> > > > > and is also equiv to the next union member struct.. and that's what
> > > > > kernel knows but not kmod... anyway,
> > > > >
> > > > >
> > > > > the dedup will compare 'user_pt_regs':
> > > > >
> > > > > [183] TYPEDEF 'user_pt_regs' type_id=181
> > > > >
> > > > > [91247] TYPEDEF 'user_pt_regs' type_id=91245
> > > > >
> > > > >
> > > > > [181] STRUCT '(anon)' size=152 vlen=3
> > > > > 'args' type_id=182 bits_offset=0
> > > > > 'psw' type_id=179 bits_offset=64
> > > > > 'gprs' type_id=48 bits_offset=192
> > > > >
> > > > > [91245] STRUCT '(anon)' size=152 vlen=3
> > > > > 'args' type_id=91246 bits_offset=0
> > > > > 'psw' type_id=91243 bits_offset=64
> > > > > 'gprs' type_id=91132 bits_offset=192
> > > > >
> > > > > and make them equiv by setting hypot_type_id for 181 to be 91245
> > > > >
> > > > >
> > > > > ---------------------------------------------------------------
> > > > >
> > > > > Now comparing the second member:
> > > > >
> > > > > struct pt_regs
> > > > > {
> > > > > union {
> > > > > user_pt_regs user_regs;
> > > > > ---> struct {
> > > > > unsigned long args[1];
> > > > > psw_t psw;
> > > > > unsigned long gprs[NUM_GPRS];
> > > > > };
> > > > > };
> > > > >
> > > > >
> > > > > kernel knows it's same struct as user_pt_regs and uses ID 181
> > > > >
> > > > > [186] UNION '(anon)' size=152 vlen=2
> > > > > 'user_regs' type_id=183 bits_offset=0
> > > > > '(anon)' type_id=181 bits_offset=0
> > > > >
> > > > > but kmod has new ID 91250 (not 91245):
> > > > >
> > > > > [91251] UNION '(anon)' size=152 vlen=2
> > > > > 'user_regs' type_id=91247 bits_offset=0
> > > > > '(anon)' type_id=91250 bits_offset=0
> > > > >
> > > > >
> > > > > and 181 and 91250 are equiv structs:
> > > > >
> > > > > [181] STRUCT '(anon)' size=152 vlen=3
> > > > > 'args' type_id=182 bits_offset=0
> > > > > 'psw' type_id=179 bits_offset=64
> > > > > 'gprs' type_id=48 bits_offset=192
> > > > >
> > > > > [91250] STRUCT '(anon)' size=152 vlen=3
> > > > > 'args' type_id=91246 bits_offset=0
> > > > > 'psw' type_id=91243 bits_offset=64
> > > > > 'gprs' type_id=91132 bits_offset=192
> > > > >
> > > > >
> > > > > now hypot_type_id for 181 is 91245, but we have brand new struct
> > > > > ID 91250, so we fail
> > > > >
> > > > > what the patch tries to do is at this point to compare ID 91250
> > > > > with 91245 and if it passes then we are equal and we throw away
> > > > > ID 91250 because the hypot_type_id for 181 stays 91245
> > > > >
> > > > >
> > > > > ufff.. thoughts? ;-)
> > > >
> > > > Oh, this is a really great analysis, thanks a lot! It makes everything
> > > > clear. Basically, BTF dedup algo does too good job deduping vmlinux
> > > > BTF. :)
> > > >
> > > > What's not clear is what to do about that, because a (current)
> > > > fundamental assumption of is_equiv() check is that any type within CU
> > > > (or in this case deduped vmlinux BTF) has exactly one unique mapping.
> > > > Clearly that's not the case now. That array fix you mentioned worked
> > > > around GCC bug where this assumption broke. In this case it's not a
> > > > bug of a compiler (neither of algo, really), we just need to make algo
> > > > smarter.
> > > >
> > > > Let me think about this a bit, we'll need to make the equivalence
> > > > check be aware that there could be multiple equivalent mappings and be
> > > > ok with that as long as all candidates are equivalent between
> > > > themselves. Lots of equivalence and recursion to think about.
> > > >
> > > > It would be great to have a simplified test case to play with that. Do
> > > > you mind distilling the chain of types above into a selftests and
> > > > posting it to the mailing list so that I can play with it? It
> > > > shouldn't be hard to write given BTF writing APIs. And we'll need a
> > > > selftests anyway once we improve the algo, so it's definitely not a
> > > > wasted work.
> > > >
> >
> >
> > I ended up with simply test, where the idea is to use
> > type id which is defined after currently processed type
> >
> > the last VALIDATE_RAW_BTF fails
> >
> > I'm not sending full atch, because I assume this is not
> > to merge yet also I assume you might want to change that
> > anyway ;-)
> >
>
> Thanks, Jiri! I'll get to playing with this some time this week,
> hopefully. I hope this is not a huge blocker for you?
I switched off s390x for the moment, so we can move on
I don't think it's huge blocker, nobody is screaming yet ;-)
thanks,
jirka
>
>
> > I'll check later on that special array case
> >
> > thanks,
> > jirka
> >
> >
> > ---
> > .../bpf/prog_tests/btf_dedup_split.c | 113 ++++++++++++++++++
> > 1 file changed, 113 insertions(+)
> >
> > diff --git a/tools/testing/selftests/bpf/prog_tests/btf_dedup_split.c b/tools/testing/selftests/bpf/prog_tests/btf_dedup_split.c
> > index 64554fd33547..2ad54e185221 100644
> > --- a/tools/testing/selftests/bpf/prog_tests/btf_dedup_split.c
> > +++ b/tools/testing/selftests/bpf/prog_tests/btf_dedup_split.c
> > @@ -314,6 +314,117 @@ static void test_split_struct_duped() {
> > btf__free(btf1);
> > }
> >
> > +static void btf_add_data(struct btf *btf, int start_id)
> > +{
> > +#define ID(n) (start_id + n)
> > + btf__set_pointer_size(btf, 8); /* enforce 64-bit arch */
> > +
> > + btf__add_int(btf, "int", 4, BTF_INT_SIGNED); /* [1] int */
> > +
> > + btf__add_struct(btf, "s", 8); /* [2] struct s { */
> > + btf__add_field(btf, "a", ID(3), 0, 0); /* struct anon a; */
> > + btf__add_field(btf, "b", ID(4), 0, 0); /* struct anon b; */
> > + /* } */
> > +
> > + btf__add_struct(btf, "(anon)", 8); /* [3] struct anon { */
> > + btf__add_field(btf, "f1", ID(1), 0, 0); /* int f1; */
> > + btf__add_field(btf, "f2", ID(1), 32, 0); /* int f2; */
> > + /* } */
> > +
> > + btf__add_struct(btf, "(anon)", 8); /* [4] struct anon { */
> > + btf__add_field(btf, "f1", ID(1), 0, 0); /* int f1; */
> > + btf__add_field(btf, "f2", ID(1), 32, 0); /* int f2; */
> > + /* } */
> > +#undef ID
> > +}
> > +
> > +static void test_split_struct_missed()
> > +{
> > + struct btf *btf1, *btf2;
> > + int err;
> > +
> > + /* generate the base data.. */
> > + btf1 = btf__new_empty();
> > + if (!ASSERT_OK_PTR(btf1, "empty_main_btf"))
> > + return;
> > +
> > + btf_add_data(btf1, 0);
> > +
> > + VALIDATE_RAW_BTF(
> > + btf1,
> > + "[1] INT 'int' size=4 bits_offset=0 nr_bits=32 encoding=SIGNED",
> > + "[2] STRUCT 's' size=8 vlen=2\n"
> > + "\t'a' type_id=3 bits_offset=0\n"
> > + "\t'b' type_id=4 bits_offset=0",
> > + "[3] STRUCT '(anon)' size=8 vlen=2\n"
> > + "\t'f1' type_id=1 bits_offset=0\n"
> > + "\t'f2' type_id=1 bits_offset=32",
> > + "[4] STRUCT '(anon)' size=8 vlen=2\n"
> > + "\t'f1' type_id=1 bits_offset=0\n"
> > + "\t'f2' type_id=1 bits_offset=32");
> > +
> > + /* ..dedup them... */
> > + err = btf__dedup(btf1, NULL, NULL);
> > + if (!ASSERT_OK(err, "btf_dedup"))
> > + goto cleanup;
> > +
> > + VALIDATE_RAW_BTF(
> > + btf1,
> > + "[1] INT 'int' size=4 bits_offset=0 nr_bits=32 encoding=SIGNED",
> > + "[2] STRUCT 's' size=8 vlen=2\n"
> > + "\t'a' type_id=3 bits_offset=0\n"
> > + "\t'b' type_id=3 bits_offset=0",
> > + "[3] STRUCT '(anon)' size=8 vlen=2\n"
> > + "\t'f1' type_id=1 bits_offset=0\n"
> > + "\t'f2' type_id=1 bits_offset=32");
> > +
> > + /* and add the same data on top of it */
> > + btf2 = btf__new_empty_split(btf1);
> > + if (!ASSERT_OK_PTR(btf2, "empty_split_btf"))
> > + goto cleanup;
> > +
> > + btf_add_data(btf2, 3);
> > +
> > + VALIDATE_RAW_BTF(
> > + btf2,
> > + "[1] INT 'int' size=4 bits_offset=0 nr_bits=32 encoding=SIGNED",
> > + "[2] STRUCT 's' size=8 vlen=2\n"
> > + "\t'a' type_id=3 bits_offset=0\n"
> > + "\t'b' type_id=3 bits_offset=0",
> > + "[3] STRUCT '(anon)' size=8 vlen=2\n"
> > + "\t'f1' type_id=1 bits_offset=0\n"
> > + "\t'f2' type_id=1 bits_offset=32",
> > + "[4] INT 'int' size=4 bits_offset=0 nr_bits=32 encoding=SIGNED",
> > + "[5] STRUCT 's' size=8 vlen=2\n"
> > + "\t'a' type_id=6 bits_offset=0\n"
> > + "\t'b' type_id=7 bits_offset=0",
> > + "[6] STRUCT '(anon)' size=8 vlen=2\n"
> > + "\t'f1' type_id=4 bits_offset=0\n"
> > + "\t'f2' type_id=4 bits_offset=32",
> > + "[7] STRUCT '(anon)' size=8 vlen=2\n"
> > + "\t'f1' type_id=4 bits_offset=0\n"
> > + "\t'f2' type_id=4 bits_offset=32");
> > +
> > + err = btf__dedup(btf2, NULL, NULL);
> > + if (!ASSERT_OK(err, "btf_dedup"))
> > + goto cleanup;
> > +
> > + /* after dedup it should match the original data */
> > + VALIDATE_RAW_BTF(
> > + btf2,
> > + "[1] INT 'int' size=4 bits_offset=0 nr_bits=32 encoding=SIGNED",
> > + "[2] STRUCT 's' size=8 vlen=2\n"
> > + "\t'a' type_id=3 bits_offset=0\n"
> > + "\t'b' type_id=3 bits_offset=0",
> > + "[3] STRUCT '(anon)' size=8 vlen=2\n"
> > + "\t'f1' type_id=1 bits_offset=0\n"
> > + "\t'f2' type_id=1 bits_offset=32");
> > +
> > +cleanup:
> > + btf__free(btf2);
> > + btf__free(btf1);
> > +}
> > +
> > void test_btf_dedup_split()
> > {
> > if (test__start_subtest("split_simple"))
> > @@ -322,4 +433,6 @@ void test_btf_dedup_split()
> > test_split_struct_duped();
> > if (test__start_subtest("split_fwd_resolve"))
> > test_split_fwd_resolve();
> > + if (test__start_subtest("split_struct_missed"))
> > + test_split_struct_missed();
> > }
> > --
> > 2.32.0
> >
>
Powered by blists - more mailing lists