| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 22 Nov 2021 16:54:02 +0100
From: Geert Uytterhoeven <geert+renesas@...der.be>
To: Tony Lindgren <tony@...mide.com>,
Russell King <linux@...linux.org.uk>,
Rajendra Nayak <rnayak@...eaurora.org>,
Paul Walmsley <paul@...an.com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Nicolas Ferre <nicolas.ferre@...rochip.com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Ludovic Desroches <ludovic.desroches@...rochip.com>,
Tero Kristo <kristo@...nel.org>,
Jonathan Cameron <jic23@...nel.org>,
Lars-Peter Clausen <lars@...afoo.de>,
Lorenzo Bianconi <lorenzo.bianconi83@...il.com>,
Benoit Parrot <bparrot@...com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Adrian Hunter <adrian.hunter@...el.com>,
Andrew Jeffery <andrew@...id.au>,
Ulf Hansson <ulf.hansson@...aro.org>,
Joel Stanley <joel@....id.au>,
Ping-Ke Shih <pkshih@...ltek.com>,
Kalle Valo <kvalo@...eaurora.org>,
"David S . Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Magnus Damm <magnus.damm@...il.com>,
Eduardo Valentin <edubezval@...il.com>,
Keerthy <j-keerthy@...com>,
"Rafael J . Wysocki" <rafael@...nel.org>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Amit Kucheria <amitk@...nel.org>,
Zhang Rui <rui.zhang@...el.com>,
Jaroslav Kysela <perex@...ex.cz>, Takashi Iwai <tiwai@...e.com>
Cc: linux-arm-kernel@...ts.infradead.org, linux-omap@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
linux-renesas-soc@...r.kernel.org, linux-iio@...r.kernel.org,
linux-media@...r.kernel.org, linux-mmc@...r.kernel.org,
linux-aspeed@...ts.ozlabs.org, openbmc@...ts.ozlabs.org,
linux-wireless@...r.kernel.org, netdev@...r.kernel.org,
linux-gpio@...r.kernel.org, linux-pm@...r.kernel.org,
alsa-devel@...a-project.org,
Geert Uytterhoeven <geert+renesas@...der.be>
Subject: [PATCH/RFC 09/17] iio: imu: st_lsm6dsx: Use bitfield helpers
Use the field_prep() helper, instead of defining a custom macro, or
open-coding the same operation.
Signed-off-by: Geert Uytterhoeven <geert+renesas@...der.be>
---
Compile-tested only.
Marked RFC, as this depends on [PATCH 01/17], but follows a different
path to upstream.
---
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 1 -
.../iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 7 +--
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 45 +++++++++----------
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c | 11 ++---
4 files changed, 32 insertions(+), 32 deletions(-)
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index 6ac4eac36458aa23..5282bdb0942e8d71 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -62,7 +62,6 @@ enum st_lsm6dsx_hw_id {
ST_LSM6DSX_SAMPLE_SIZE)
#define ST_LSM6DSX_MAX_TAGGED_WORD_LEN ((32 / ST_LSM6DSX_TAGGED_SAMPLE_SIZE) \
* ST_LSM6DSX_TAGGED_SAMPLE_SIZE)
-#define ST_LSM6DSX_SHIFT_VAL(val, mask) (((val) << __ffs(mask)) & (mask))
#define ST_LSM6DSX_CHANNEL_ACC(chan_type, addr, mod, scan_idx) \
{ \
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
index 16730a7809643695..80c763b837bfde01 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
@@ -29,6 +29,7 @@
* Lorenzo Bianconi <lorenzo.bianconi@...com>
* Denis Ciocca <denis.ciocca@...com>
*/
+#include <linux/bitfield.h>
#include <linux/module.h>
#include <linux/iio/kfifo_buf.h>
#include <linux/iio/iio.h>
@@ -155,7 +156,7 @@ static int st_lsm6dsx_update_decimators(struct st_lsm6dsx_hw *hw)
dec_reg = &hw->settings->decimator[sensor->id];
if (dec_reg->addr) {
- int val = ST_LSM6DSX_SHIFT_VAL(data, dec_reg->mask);
+ int val = field_prep(dec_reg->mask, data);
err = st_lsm6dsx_update_bits_locked(hw, dec_reg->addr,
dec_reg->mask,
@@ -177,7 +178,7 @@ static int st_lsm6dsx_update_decimators(struct st_lsm6dsx_hw *hw)
if (ts_dec_reg->addr) {
int val, ts_dec = !!hw->ts_sip;
- val = ST_LSM6DSX_SHIFT_VAL(ts_dec, ts_dec_reg->mask);
+ val = field_prep(ts_dec_reg->mask, ts_dec);
err = st_lsm6dsx_update_bits_locked(hw, ts_dec_reg->addr,
ts_dec_reg->mask, val);
}
@@ -215,7 +216,7 @@ static int st_lsm6dsx_set_fifo_odr(struct st_lsm6dsx_sensor *sensor,
} else {
data = 0;
}
- val = ST_LSM6DSX_SHIFT_VAL(data, batch_reg->mask);
+ val = field_prep(batch_reg->mask, data);
return st_lsm6dsx_update_bits_locked(hw, batch_reg->addr,
batch_reg->mask, val);
} else {
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index f2cbbc756459b1cb..f7f6783f8842ed98 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -46,6 +46,7 @@
* Denis Ciocca <denis.ciocca@...com>
*/
+#include <linux/bitfield.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/delay.h>
@@ -1159,7 +1160,7 @@ int st_lsm6dsx_set_page(struct st_lsm6dsx_hw *hw, bool enable)
int err;
hub_settings = &hw->settings->shub_settings;
- data = ST_LSM6DSX_SHIFT_VAL(enable, hub_settings->page_mux.mask);
+ data = field_prep(hub_settings->page_mux.mask, enable);
err = regmap_update_bits(hw->regmap, hub_settings->page_mux.addr,
hub_settings->page_mux.mask, data);
usleep_range(100, 150);
@@ -1220,8 +1221,7 @@ static int st_lsm6dsx_set_full_scale(struct st_lsm6dsx_sensor *sensor,
if (i == fs_table->fs_len)
return -EINVAL;
- data = ST_LSM6DSX_SHIFT_VAL(fs_table->fs_avl[i].val,
- fs_table->reg.mask);
+ data = field_prep(fs_table->reg.mask, fs_table->fs_avl[i].val);
err = st_lsm6dsx_update_bits_locked(sensor->hw, fs_table->reg.addr,
fs_table->reg.mask, data);
if (err < 0)
@@ -1319,7 +1319,7 @@ st_lsm6dsx_set_odr(struct st_lsm6dsx_sensor *sensor, u32 req_odr)
}
reg = &hw->settings->odr_table[ref_sensor->id].reg;
- data = ST_LSM6DSX_SHIFT_VAL(val, reg->mask);
+ data = field_prep(reg->mask, val);
return st_lsm6dsx_update_bits_locked(hw, reg->addr, reg->mask, data);
}
@@ -1473,7 +1473,7 @@ static int st_lsm6dsx_event_setup(struct st_lsm6dsx_hw *hw, int state)
reg = &hw->settings->event_settings.enable_reg;
if (reg->addr) {
- data = ST_LSM6DSX_SHIFT_VAL(state, reg->mask);
+ data = field_prep(reg->mask, state);
err = st_lsm6dsx_update_bits_locked(hw, reg->addr,
reg->mask, data);
if (err < 0)
@@ -1481,7 +1481,7 @@ static int st_lsm6dsx_event_setup(struct st_lsm6dsx_hw *hw, int state)
}
/* Enable wakeup interrupt */
- data = ST_LSM6DSX_SHIFT_VAL(state, hw->irq_routing->mask);
+ data = field_prep(hw->irq_routing->mask, state);
return st_lsm6dsx_update_bits_locked(hw, hw->irq_routing->addr,
hw->irq_routing->mask, data);
}
@@ -1526,7 +1526,7 @@ st_lsm6dsx_write_event(struct iio_dev *iio_dev,
return -EINVAL;
reg = &hw->settings->event_settings.wakeup_reg;
- data = ST_LSM6DSX_SHIFT_VAL(val, reg->mask);
+ data = field_prep(reg->mask, val);
err = st_lsm6dsx_update_bits_locked(hw, reg->addr,
reg->mask, data);
if (err < 0)
@@ -1786,7 +1786,7 @@ static int st_lsm6dsx_init_shub(struct st_lsm6dsx_hw *hw)
return err;
}
- data = ST_LSM6DSX_SHIFT_VAL(1, hub_settings->pullup_en.mask);
+ data = field_prep(hub_settings->pullup_en.mask, 1);
err = regmap_update_bits(hw->regmap,
hub_settings->pullup_en.addr,
hub_settings->pullup_en.mask, data);
@@ -1804,7 +1804,7 @@ static int st_lsm6dsx_init_shub(struct st_lsm6dsx_hw *hw)
if (err < 0)
return err;
- data = ST_LSM6DSX_SHIFT_VAL(3, hub_settings->aux_sens.mask);
+ data = field_prep(hub_settings->aux_sens.mask, 3);
err = regmap_update_bits(hw->regmap,
hub_settings->aux_sens.addr,
hub_settings->aux_sens.mask, data);
@@ -1816,7 +1816,7 @@ static int st_lsm6dsx_init_shub(struct st_lsm6dsx_hw *hw)
}
if (hub_settings->emb_func.addr) {
- data = ST_LSM6DSX_SHIFT_VAL(1, hub_settings->emb_func.mask);
+ data = field_prep(hub_settings->emb_func.mask, 1);
err = regmap_update_bits(hw->regmap,
hub_settings->emb_func.addr,
hub_settings->emb_func.mask, data);
@@ -1833,7 +1833,7 @@ static int st_lsm6dsx_init_hw_timer(struct st_lsm6dsx_hw *hw)
ts_settings = &hw->settings->ts_settings;
/* enable hw timestamp generation if necessary */
if (ts_settings->timer_en.addr) {
- val = ST_LSM6DSX_SHIFT_VAL(1, ts_settings->timer_en.mask);
+ val = field_prep(ts_settings->timer_en.mask, 1);
err = regmap_update_bits(hw->regmap,
ts_settings->timer_en.addr,
ts_settings->timer_en.mask, val);
@@ -1843,7 +1843,7 @@ static int st_lsm6dsx_init_hw_timer(struct st_lsm6dsx_hw *hw)
/* enable high resolution for hw ts timer if necessary */
if (ts_settings->hr_timer.addr) {
- val = ST_LSM6DSX_SHIFT_VAL(1, ts_settings->hr_timer.mask);
+ val = field_prep(ts_settings->hr_timer.mask, 1);
err = regmap_update_bits(hw->regmap,
ts_settings->hr_timer.addr,
ts_settings->hr_timer.mask, val);
@@ -1853,7 +1853,7 @@ static int st_lsm6dsx_init_hw_timer(struct st_lsm6dsx_hw *hw)
/* enable ts queueing in FIFO if necessary */
if (ts_settings->fifo_en.addr) {
- val = ST_LSM6DSX_SHIFT_VAL(1, ts_settings->fifo_en.mask);
+ val = field_prep(ts_settings->fifo_en.mask, 1);
err = regmap_update_bits(hw->regmap,
ts_settings->fifo_en.addr,
ts_settings->fifo_en.mask, val);
@@ -1899,7 +1899,7 @@ static int st_lsm6dsx_reset_device(struct st_lsm6dsx_hw *hw)
/* device sw reset */
reg = &hw->settings->reset;
err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
- ST_LSM6DSX_SHIFT_VAL(1, reg->mask));
+ field_prep(reg->mask, 1));
if (err < 0)
return err;
@@ -1908,7 +1908,7 @@ static int st_lsm6dsx_reset_device(struct st_lsm6dsx_hw *hw)
/* reload trimming parameter */
reg = &hw->settings->boot;
err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
- ST_LSM6DSX_SHIFT_VAL(1, reg->mask));
+ field_prep(reg->mask, 1));
if (err < 0)
return err;
@@ -1929,7 +1929,7 @@ static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw)
/* enable Block Data Update */
reg = &hw->settings->bdu;
err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
- ST_LSM6DSX_SHIFT_VAL(1, reg->mask));
+ field_prep(reg->mask, 1));
if (err < 0)
return err;
@@ -1939,7 +1939,7 @@ static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw)
return err;
err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
- ST_LSM6DSX_SHIFT_VAL(1, reg->mask));
+ field_prep(reg->mask, 1));
if (err < 0)
return err;
@@ -1947,7 +1947,7 @@ static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw)
if (hw->settings->irq_config.lir.addr) {
reg = &hw->settings->irq_config.lir;
err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
- ST_LSM6DSX_SHIFT_VAL(1, reg->mask));
+ field_prep(reg->mask, 1));
if (err < 0)
return err;
@@ -1956,7 +1956,7 @@ static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw)
reg = &hw->settings->irq_config.clear_on_read;
err = regmap_update_bits(hw->regmap,
reg->addr, reg->mask,
- ST_LSM6DSX_SHIFT_VAL(1, reg->mask));
+ field_prep(reg->mask, 1));
if (err < 0)
return err;
}
@@ -1966,7 +1966,7 @@ static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw)
if (hw->settings->drdy_mask.addr) {
reg = &hw->settings->drdy_mask;
err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
- ST_LSM6DSX_SHIFT_VAL(1, reg->mask));
+ field_prep(reg->mask, 1));
if (err < 0)
return err;
}
@@ -2131,8 +2131,7 @@ static int st_lsm6dsx_irq_setup(struct st_lsm6dsx_hw *hw)
reg = &hw->settings->irq_config.hla;
err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
- ST_LSM6DSX_SHIFT_VAL(irq_active_low,
- reg->mask));
+ field_prep(reg->mask, irq_active_low));
if (err < 0)
return err;
@@ -2141,7 +2140,7 @@ static int st_lsm6dsx_irq_setup(struct st_lsm6dsx_hw *hw)
(pdata && pdata->open_drain)) {
reg = &hw->settings->irq_config.od;
err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
- ST_LSM6DSX_SHIFT_VAL(1, reg->mask));
+ field_prep(reg->mask, 1));
if (err < 0)
return err;
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
index 99562ba85ee43098..ea0e568c042b4b43 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
@@ -22,6 +22,7 @@
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
+#include <linux/bitfield.h>
#include <linux/module.h>
#include <linux/regmap.h>
#include <linux/iio/iio.h>
@@ -263,7 +264,7 @@ static int st_lsm6dsx_shub_master_enable(struct st_lsm6dsx_sensor *sensor,
goto out;
}
- data = ST_LSM6DSX_SHIFT_VAL(enable, hub_settings->master_en.mask);
+ data = field_prep(hub_settings->master_en.mask, enable);
err = regmap_update_bits(hw->regmap, hub_settings->master_en.addr,
hub_settings->master_en.mask, data);
@@ -296,7 +297,7 @@ st_lsm6dsx_shub_read(struct st_lsm6dsx_sensor *sensor, u8 addr,
aux_sens = &hw->settings->shub_settings.aux_sens;
/* do not overwrite aux_sens */
if (slv_addr + 2 == aux_sens->addr)
- slv_config = ST_LSM6DSX_SHIFT_VAL(3, aux_sens->mask);
+ slv_config = field_prep(aux_sens->mask, 3);
config[0] = (sensor->ext_info.addr << 1) | 1;
config[1] = addr;
@@ -346,7 +347,7 @@ st_lsm6dsx_shub_write(struct st_lsm6dsx_sensor *sensor, u8 addr,
if (hub_settings->wr_once.addr) {
unsigned int data;
- data = ST_LSM6DSX_SHIFT_VAL(1, hub_settings->wr_once.mask);
+ data = field_prep(hub_settings->wr_once.mask, 1);
err = st_lsm6dsx_shub_write_reg_with_mask(hw,
hub_settings->wr_once.addr,
hub_settings->wr_once.mask,
@@ -395,7 +396,7 @@ st_lsm6dsx_shub_write_with_mask(struct st_lsm6dsx_sensor *sensor,
if (err < 0)
return err;
- data = ((data & ~mask) | (val << __ffs(mask) & mask));
+ data = (data & ~mask) | field_prep(mask, val);
return st_lsm6dsx_shub_write(sensor, addr, &data, sizeof(data));
}
@@ -835,7 +836,7 @@ st_lsm6dsx_shub_check_wai(struct st_lsm6dsx_hw *hw, u8 *i2c_addr,
slv_addr = ST_LSM6DSX_SLV_ADDR(0, hub_settings->slv0_addr);
/* do not overwrite aux_sens */
if (slv_addr + 2 == aux_sens->addr)
- slv_config = ST_LSM6DSX_SHIFT_VAL(3, aux_sens->mask);
+ slv_config = field_prep(aux_sens->mask, 3);
for (i = 0; i < ARRAY_SIZE(settings->i2c_addr); i++) {
if (!settings->i2c_addr[i])
--
2.25.1
Powered by blists - more mailing lists