netdev - [PATCH net] net: marvell: mvpp2: increase MTU limit when XDP enabled

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20211122200834.29219-1-kabel@kernel.org>
Date:   Mon, 22 Nov 2021 21:08:34 +0100
From:   Marek Behún <kabel@...nel.org>
To:     netdev@...r.kernel.org
Cc:     Jakub Kicinski <kuba@...nel.org>, Andrew Lunn <andrew@...n.ch>,
        Sven Auhagen <sven.auhagen@...eatech.de>,
        Jesper Dangaard Brouer <brouer@...hat.com>,
        davem@...emloft.net,
        Marek Behún <kabel@...nel.org>
Subject: [PATCH net] net: marvell: mvpp2: increase MTU limit when XDP enabled

Currently mvpp2_xdp_setup won't allow attaching XDP program if
  mtu > ETH_DATA_LEN (1500).

The mvpp2_change_mtu on the other hand checks whether
  MVPP2_RX_PKT_SIZE(mtu) > MVPP2_BM_LONG_PKT_SIZE.

These two checks are semantically different.

Moreover this limit can be increased to MVPP2_MAX_RX_BUF_SIZE, since in
mvpp2_rx we have
  xdp.data = data + MVPP2_MH_SIZE + MVPP2_SKB_HEADROOM;
  xdp.frame_sz = PAGE_SIZE;

Change the checks to check whether
  mtu > MVPP2_MAX_RX_BUF_SIZE

Fixes: 07dd0a7aae7f ("mvpp2: add basic XDP support")
Signed-off-by: Marek Behún <kabel@...nel.org>
---
The NL_SET_ERR_MSG_MOD() is not a printf-like function, the message
must be a string literal. The last time Andrew Lunn asked if I could
use some CPP magic to make it print the MVPP2_MAX_RX_BUF_SIZE, since
it is a constant.

I don't think this is possible, so we won't be printing the maximum
possible value when failing to enable XDP due to MTU is too large.

But I changed the patch so that it now prints the maximum possible value
in the MTU change function when XDP is already enabled.

I also added Fixes tag.
---
 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 49fc31fe0db8..a3aefdf0784e 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -5017,11 +5017,13 @@ static int mvpp2_change_mtu(struct net_device *dev, int mtu)
 		mtu = ALIGN(MVPP2_RX_PKT_SIZE(mtu), 8);
 	}
 
+	if (port->xdp_prog && mtu > MVPP2_MAX_RX_BUF_SIZE) {
+		netdev_err(dev, "Illegal MTU value %d (> %d) for XDP mode\n",
+			   mtu, (int)MVPP2_MAX_RX_BUF_SIZE);
+		return -EINVAL;
+	}
+
 	if (MVPP2_RX_PKT_SIZE(mtu) > MVPP2_BM_LONG_PKT_SIZE) {
-		if (port->xdp_prog) {
-			netdev_err(dev, "Jumbo frames are not supported with XDP\n");
-			return -EINVAL;
-		}
 		if (priv->percpu_pools) {
 			netdev_warn(dev, "mtu %d too high, switching to shared buffers", mtu);
 			mvpp2_bm_switch_buffers(priv, false);
@@ -5307,8 +5309,8 @@ static int mvpp2_xdp_setup(struct mvpp2_port *port, struct netdev_bpf *bpf)
 	bool running = netif_running(port->dev);
 	bool reset = !prog != !port->xdp_prog;
 
-	if (port->dev->mtu > ETH_DATA_LEN) {
-		NL_SET_ERR_MSG_MOD(bpf->extack, "XDP is not supported with jumbo frames enabled");
+	if (port->dev->mtu > MVPP2_MAX_RX_BUF_SIZE) {
+		NL_SET_ERR_MSG_MOD(bpf->extack, "MTU too large for XDP");
 		return -EOPNOTSUPP;
 	}
 
-- 
2.32.0