| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <E1mpwS8-00D8Lh-49@rmk-PC.armlinux.org.uk>
Date: Wed, 24 Nov 2021 17:53:04 +0000
From: "Russell King (Oracle)" <rmk+kernel@...linux.org.uk>
To: Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Vivien Didelot <vivien.didelot@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Claudiu Manoil <claudiu.manoil@....com>,
George McCollister <george.mccollister@...il.com>,
Hauke Mehrtens <hauke@...ke-m.de>,
Kurt Kanzenbach <kurt@...utronix.de>,
Vladimir Oltean <vladimir.oltean@....com>,
Woojung Huh <woojung.huh@...rochip.com>
Cc: "David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>, netdev@...r.kernel.org,
UNGLinuxDriver@...rochip.com
Subject: [PATCH RFC net-next 08/12] net: dsa: lantiq: convert to
phylink_generic_validate()
Populate the supported interfaces and MAC capabilities for the Lantiq
DSA switches and remove the old validate implementation to allow DSA to
use phylink_generic_validate() for this switch driver.
The exclusion of Gigabit linkmodes for MII, Reverse MII and Reduced MII
links is handled within phylink_generic_validate() in phylink, so there
is no need to make them conditional on the interface mode in the driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
---
drivers/net/dsa/lantiq_gswip.c | 120 +++++++++++----------------------
1 file changed, 38 insertions(+), 82 deletions(-)
diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index 7056d98d8177..583af774e1bd 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -1438,114 +1438,70 @@ static int gswip_port_fdb_dump(struct dsa_switch *ds, int port,
return 0;
}
-static void gswip_phylink_set_capab(unsigned long *supported,
- struct phylink_link_state *state)
-{
- __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
-
- /* Allow all the expected bits */
- phylink_set(mask, Autoneg);
- phylink_set_port_modes(mask);
- phylink_set(mask, Pause);
- phylink_set(mask, Asym_Pause);
-
- /* With the exclusion of MII, Reverse MII and Reduced MII, we
- * support Gigabit, including Half duplex
- */
- if (state->interface != PHY_INTERFACE_MODE_MII &&
- state->interface != PHY_INTERFACE_MODE_REVMII &&
- state->interface != PHY_INTERFACE_MODE_RMII) {
- phylink_set(mask, 1000baseT_Full);
- phylink_set(mask, 1000baseT_Half);
- }
-
- phylink_set(mask, 10baseT_Half);
- phylink_set(mask, 10baseT_Full);
- phylink_set(mask, 100baseT_Half);
- phylink_set(mask, 100baseT_Full);
-
- linkmode_and(supported, supported, mask);
- linkmode_and(state->advertising, state->advertising, mask);
-}
-
-static void gswip_xrx200_phylink_validate(struct dsa_switch *ds, int port,
- unsigned long *supported,
- struct phylink_link_state *state)
+static void gswip_xrx200_phylink_get_caps(struct dsa_switch *ds, int port,
+ struct phylink_config *config)
{
switch (port) {
case 0:
case 1:
- if (!phy_interface_mode_is_rgmii(state->interface) &&
- state->interface != PHY_INTERFACE_MODE_MII &&
- state->interface != PHY_INTERFACE_MODE_REVMII &&
- state->interface != PHY_INTERFACE_MODE_RMII)
- goto unsupported;
+ phy_interface_set_rgmii(config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_MII,
+ config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_REVMII,
+ config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_RMII,
+ config->supported_interfaces);
break;
+
case 2:
case 3:
case 4:
- if (state->interface != PHY_INTERFACE_MODE_INTERNAL)
- goto unsupported;
+ __set_bit(PHY_INTERFACE_MODE_INTERNAL,
+ config->supported_interfaces);
break;
+
case 5:
- if (!phy_interface_mode_is_rgmii(state->interface) &&
- state->interface != PHY_INTERFACE_MODE_INTERNAL)
- goto unsupported;
+ phy_interface_set_rgmii(config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_INTERNAL,
+ config->supported_interfaces);
break;
- default:
- linkmode_zero(supported);
- dev_err(ds->dev, "Unsupported port: %i\n", port);
- return;
}
- gswip_phylink_set_capab(supported, state);
-
- return;
-
-unsupported:
- linkmode_zero(supported);
- dev_err(ds->dev, "Unsupported interface '%s' for port %d\n",
- phy_modes(state->interface), port);
+ config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+ MAC_10 | MAC_100 | MAC_1000;
}
-static void gswip_xrx300_phylink_validate(struct dsa_switch *ds, int port,
- unsigned long *supported,
- struct phylink_link_state *state)
+static void gswip_xrx300_phylink_get_caps(struct dsa_switch *ds, int port,
+ struct phylink_config *config)
{
switch (port) {
case 0:
- if (!phy_interface_mode_is_rgmii(state->interface) &&
- state->interface != PHY_INTERFACE_MODE_GMII &&
- state->interface != PHY_INTERFACE_MODE_RMII)
- goto unsupported;
+ phy_interface_set_rgmii(config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_GMII,
+ config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_RMII,
+ config->supported_interfaces);
break;
+
case 1:
case 2:
case 3:
case 4:
- if (state->interface != PHY_INTERFACE_MODE_INTERNAL)
- goto unsupported;
+ __set_bit(PHY_INTERFACE_MODE_INTERNAL,
+ config->supported_interfaces);
break;
+
case 5:
- if (!phy_interface_mode_is_rgmii(state->interface) &&
- state->interface != PHY_INTERFACE_MODE_INTERNAL &&
- state->interface != PHY_INTERFACE_MODE_RMII)
- goto unsupported;
+ phy_interface_set_rgmii(config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_INTERNAL,
+ config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_RMII,
+ config->supported_interfaces);
break;
- default:
- linkmode_zero(supported);
- dev_err(ds->dev, "Unsupported port: %i\n", port);
- return;
}
- gswip_phylink_set_capab(supported, state);
-
- return;
-
-unsupported:
- linkmode_zero(supported);
- dev_err(ds->dev, "Unsupported interface '%s' for port %d\n",
- phy_modes(state->interface), port);
+ config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+ MAC_10 | MAC_100 | MAC_1000;
}
static void gswip_port_set_link(struct gswip_priv *priv, int port, bool link)
@@ -1827,7 +1783,7 @@ static const struct dsa_switch_ops gswip_xrx200_switch_ops = {
.port_fdb_add = gswip_port_fdb_add,
.port_fdb_del = gswip_port_fdb_del,
.port_fdb_dump = gswip_port_fdb_dump,
- .phylink_validate = gswip_xrx200_phylink_validate,
+ .phylink_get_caps = gswip_xrx200_phylink_get_caps,
.phylink_mac_config = gswip_phylink_mac_config,
.phylink_mac_link_down = gswip_phylink_mac_link_down,
.phylink_mac_link_up = gswip_phylink_mac_link_up,
@@ -1851,7 +1807,7 @@ static const struct dsa_switch_ops gswip_xrx300_switch_ops = {
.port_fdb_add = gswip_port_fdb_add,
.port_fdb_del = gswip_port_fdb_del,
.port_fdb_dump = gswip_port_fdb_dump,
- .phylink_validate = gswip_xrx300_phylink_validate,
+ .phylink_get_caps = gswip_xrx300_phylink_get_caps,
.phylink_mac_config = gswip_phylink_mac_config,
.phylink_mac_link_down = gswip_phylink_mac_link_down,
.phylink_mac_link_up = gswip_phylink_mac_link_up,
--
2.30.2
Powered by blists - more mailing lists