| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20211125172021.976384-1-mailhol.vincent@wanadoo.fr>
Date: Fri, 26 Nov 2021 02:20:16 +0900
From: Vincent Mailhol <mailhol.vincent@...adoo.fr>
To: Marc Kleine-Budde <mkl@...gutronix.de>, linux-can@...r.kernel.org
Cc: Oliver Hartkopp <socketcan@...tkopp.net>, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-sunxi@...ts.linux.dev,
Vincent Mailhol <mailhol.vincent@...adoo.fr>
Subject: [PATCH v2 0/5] fix statistics and payload issues for error
Important: this patch series depends on below patch:
https://lore.kernel.org/linux-can/20211123111654.621610-1-mailhol.vincent@wanadoo.fr/T/#u
There are some common errors which are made when updating the network
statistics or processing the CAN payload:
1. Incrementing the "normal" stats when generating or sending a CAN
error message frame. Error message frames are an abstraction of
Socket CAN and do not exist on the wire. The first patch of this
series fixes the RX stats for 22 different drivers, the second one
fixes the TX stasts for the kvaser driver (N.B. only this driver is
capable of sending error on the bus).
2. Copying the payload of RTR frames: RTR frames have no payload and
the data buffer only contains garbage. The DLC/length should not be
used to do a memory copy. The third patch of this series address
this issue for 3 different drivers.
3. Counting the length of the Remote Transmission Frames (RTR). The
length of an RTR frame is the length of the requested frame not the
actual payload. In reality the payload of an RTR frame is always 0
bytes long. The fourth patch of this series fixes the RX stats for
27 different drivers and the fifth one fixes the TX stats for 25
different ones.
* Changelog *
v1 -> v2:
* can_rx_offload_napi_poll: v1 used CAN_ERR_MASK instead of
CAN_ERR_FLAG. Fixed the issue.
* use correct vocabulary. The correct term to designate the Socket
CAN specific error skb is "error message frames" not "error
frames". "error frames" is used in the standard and has a
different meaning.
* better factorize code for the rx RTR frames. Most of the driver
already has a switch to check if the frame is a RTR. Moved the
instruction to increase net_device_stats:rx_bytes inside the else
branch of those switches whenever possible (for some drivers with
some complex logic, putting and additional RTR check was easier).
* add a patch which prevent drivers to copy the payload of RTR
frames.
* add a patch to cover the tx RTR frames (the fifth patch of
v2). The tx RTR frames issue was supposedly covered by the
can_get_echo_skb() function which returns the correct length for
drivers to increase their stats. However, the reality is that most
of the drivers do not check this value and instead use a local
copy of the length/dlc.
Vincent Mailhol (5):
can: do not increase rx statistics when generating a CAN rx error
message frame
can: kvaser_usb: do not increase tx statistics when sending error
message frames
can: do not copy the payload of RTR frames
can: do not increase rx_bytes statistics for RTR frames
can: do not increase tx_bytes statistics for RTR frames
drivers/net/can/at91_can.c | 18 ++---
drivers/net/can/c_can/c_can.h | 1 -
drivers/net/can/c_can/c_can_main.c | 16 +---
drivers/net/can/cc770/cc770.c | 16 ++--
drivers/net/can/dev/dev.c | 4 -
drivers/net/can/dev/rx-offload.c | 7 +-
drivers/net/can/grcan.c | 6 +-
drivers/net/can/ifi_canfd/ifi_canfd.c | 11 +--
drivers/net/can/janz-ican3.c | 6 +-
drivers/net/can/kvaser_pciefd.c | 16 ++--
drivers/net/can/m_can/m_can.c | 13 +---
drivers/net/can/mscan/mscan.c | 14 ++--
drivers/net/can/pch_can.c | 33 ++++----
drivers/net/can/peak_canfd/peak_canfd.c | 14 ++--
drivers/net/can/rcar/rcar_can.c | 22 +++---
drivers/net/can/rcar/rcar_canfd.c | 13 +---
drivers/net/can/sja1000/sja1000.c | 11 +--
drivers/net/can/slcan.c | 7 +-
drivers/net/can/softing/softing_main.c | 8 +-
drivers/net/can/spi/hi311x.c | 31 ++++----
drivers/net/can/spi/mcp251x.c | 31 ++++----
drivers/net/can/sun4i_can.c | 22 +++---
drivers/net/can/usb/ems_usb.c | 14 ++--
drivers/net/can/usb/esd_usb2.c | 13 ++--
drivers/net/can/usb/etas_es58x/es58x_core.c | 7 --
drivers/net/can/usb/gs_usb.c | 7 +-
drivers/net/can/usb/kvaser_usb/kvaser_usb.h | 5 +-
.../net/can/usb/kvaser_usb/kvaser_usb_core.c | 4 +-
.../net/can/usb/kvaser_usb/kvaser_usb_hydra.c | 78 +++++++++----------
.../net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 20 ++---
drivers/net/can/usb/mcba_usb.c | 23 +++---
drivers/net/can/usb/peak_usb/pcan_usb.c | 9 +--
drivers/net/can/usb/peak_usb/pcan_usb_core.c | 20 +++--
drivers/net/can/usb/peak_usb/pcan_usb_core.h | 1 -
drivers/net/can/usb/peak_usb/pcan_usb_fd.c | 11 +--
drivers/net/can/usb/peak_usb/pcan_usb_pro.c | 12 +--
drivers/net/can/usb/ucan.c | 17 ++--
drivers/net/can/usb/usb_8dev.c | 17 ++--
drivers/net/can/vcan.c | 7 +-
drivers/net/can/vxcan.c | 2 +-
drivers/net/can/xilinx_can.c | 19 ++---
include/linux/can/skb.h | 5 +-
42 files changed, 258 insertions(+), 353 deletions(-)
base-commit: 4cc19cc269921210f3da65e4b038ad987835b342
--
2.32.0
Powered by blists - more mailing lists