[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <9dc0cbc3-8de0-f1ed-cfc9-852b7e69ab3c@collabora.com>
Date: Mon, 6 Dec 2021 16:14:44 +0100
From: AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>
To: Biao Huang <biao.huang@...iatek.com>, davem@...emloft.net,
Jakub Kicinski <kuba@...nel.org>,
Rob Herring <robh+dt@...nel.org>
Cc: Matthias Brugger <matthias.bgg@...il.com>,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Jose Abreu <joabreu@...opsys.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org,
linux-stm32@...md-mailman.stormreply.com,
srv_heupstream@...iatek.com, macpaul.lin@...iatek.com,
dkirjanov@...e.de
Subject: Re: [PATCH v4 1/7] net-next: stmmac: dwmac-mediatek: add platform
level clocks management
Il 03/12/21 07:34, Biao Huang ha scritto:
> This patch implements clks_config callback for dwmac-mediatek platform,
> which could support platform level clocks management.
>
> Signed-off-by: Biao Huang <biao.huang@...iatek.com>
> ---
> .../ethernet/stmicro/stmmac/dwmac-mediatek.c | 24 ++++++++++++++-----
> 1 file changed, 18 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
> index 58c0feaa8131..157ff655c85e 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
> @@ -359,9 +359,6 @@ static int mediatek_dwmac_init(struct platform_device *pdev, void *priv)
> return ret;
> }
>
> - pm_runtime_enable(&pdev->dev);
> - pm_runtime_get_sync(&pdev->dev);
> -
> return 0;
> }
>
> @@ -370,11 +367,25 @@ static void mediatek_dwmac_exit(struct platform_device *pdev, void *priv)
> struct mediatek_dwmac_plat_data *plat = priv;
>
> clk_bulk_disable_unprepare(plat->num_clks_to_config, plat->clks);
> -
> - pm_runtime_put_sync(&pdev->dev);
> - pm_runtime_disable(&pdev->dev);
> }
>
> +static int mediatek_dwmac_clks_config(void *priv, bool enabled)
> +{
> + struct mediatek_dwmac_plat_data *plat = priv;
> + int ret = 0;
> +
> + if (enabled) {
> + ret = clk_bulk_prepare_enable(plat->num_clks_to_config, plat->clks);
> + if (ret) {
> + dev_err(plat->dev, "failed to enable clks, err = %d\n", ret);
> + return ret;
> + }
> + } else {
> + clk_bulk_disable_unprepare(plat->num_clks_to_config, plat->clks);
> + }
> +
> + return ret;
> +}
> static int mediatek_dwmac_probe(struct platform_device *pdev)
> {
> struct mediatek_dwmac_plat_data *priv_plat;
> @@ -420,6 +431,7 @@ static int mediatek_dwmac_probe(struct platform_device *pdev)
> plat_dat->bsp_priv = priv_plat;
> plat_dat->init = mediatek_dwmac_init;
> plat_dat->exit = mediatek_dwmac_exit;
> + plat_dat->clks_config = mediatek_dwmac_clks_config;
> mediatek_dwmac_init(pdev, priv_plat);
>
> ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
>
Hello Biao,
you're removing all calls to pm_runtime_* functions, so there is no more reason
to include linux/pm_runtime.h in this file: please also remove the inclusion.
Thanks!
Powered by blists - more mailing lists