netdev - [PATCH net-next v4 00/10] net: lan966x: Add switchdev and vlan support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20211213101432.2668820-1-horatiu.vultur@microchip.com>
Date:   Mon, 13 Dec 2021 11:14:22 +0100
From:   Horatiu Vultur <horatiu.vultur@...rochip.com>
To:     <netdev@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>
CC:     <davem@...emloft.net>, <kuba@...nel.org>, <robh+dt@...nel.org>,
        <UNGLinuxDriver@...rochip.com>, <linux@...linux.org.uk>,
        <f.fainelli@...il.com>, <vivien.didelot@...il.com>,
        <vladimir.oltean@....com>, <andrew@...n.ch>,
        Horatiu Vultur <horatiu.vultur@...rochip.com>
Subject: [PATCH net-next v4 00/10] net: lan966x: Add switchdev and vlan support

This patch series extends lan966x with switchdev and vlan support.
The first patches just adds new registers and extend the MAC table to
handle the interrupts when a new address is learn/forget.

v3->v4:
- split the last patch in multiple patches
- replace spin_lock_irqsave/restore with spin_lock/spin_unlock
- remove lan966x_port_change_rx_flags because it was copying all the frames to
  the CPU instead of removing all RX filters.
- implement SWITCHDEV_ATTR_ID_PORT_PRE_BRIDGE_FLAGS
- remove calls to __dev_mc_unsync/sync as they are not needed
- replace 0/1 with false/true
- make sure that the lan966x ports are not added to bridges that have other
  interfaces except lan966x
- and allow the lan966x ports to be part of only the same bridge.

v2->v3:
- separate the PVID used when the port is in host mode or vlan unaware
- fix issue when the port was leaving the bridge

v1->v2:
- when allocating entries for the mac table use kzalloc instead of
  devm_kzalloc
- also use GFP_KERNEL instead of GFP_ATOMIC, because is never called
  in atomic context
- when deleting an mac table entry, the order of operations was wrong
- if ana irq is enabled make sure it gets disabled when the driver is
  removed

Horatiu Vultur (10):
  net: lan966x: Add registers that are used for switch and vlan
    functionality
  dt-bindings: net: lan966x: Extend with the analyzer interrupt
  net: lan966x: add support for interrupts from analyzer
  net: lan966x: More MAC table functionality
  net: lan966x: Add vlan support
  net: lan966x: Remove .ndo_change_rx_flags
  net: lan966x: Add support to offload the forwarding.
  net: lan966x: Extend switchdev with vlan support
  net: lan966x: Extend switchdev bridge flags
  net: lan966x: Extend switchdev with fdb support

 .../net/microchip,lan966x-switch.yaml         |   2 +
 .../net/ethernet/microchip/lan966x/Kconfig    |   1 +
 .../net/ethernet/microchip/lan966x/Makefile   |   3 +-
 .../ethernet/microchip/lan966x/lan966x_fdb.c  | 214 +++++++
 .../ethernet/microchip/lan966x/lan966x_mac.c  | 342 +++++++++++
 .../ethernet/microchip/lan966x/lan966x_main.c | 112 +++-
 .../ethernet/microchip/lan966x/lan966x_main.h |  83 ++-
 .../ethernet/microchip/lan966x/lan966x_regs.h | 129 ++++
 .../microchip/lan966x/lan966x_switchdev.c     | 554 ++++++++++++++++++
 .../ethernet/microchip/lan966x/lan966x_vlan.c | 446 ++++++++++++++
 10 files changed, 1855 insertions(+), 31 deletions(-)
 create mode 100644 drivers/net/ethernet/microchip/lan966x/lan966x_fdb.c
 create mode 100644 drivers/net/ethernet/microchip/lan966x/lan966x_switchdev.c
 create mode 100644 drivers/net/ethernet/microchip/lan966x/lan966x_vlan.c

-- 
2.33.0