[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20211218081425.18722-9-luizluca@gmail.com>
Date: Sat, 18 Dec 2021 05:14:20 -0300
From: Luiz Angelo Daros de Luca <luizluca@...il.com>
To: netdev@...r.kernel.org
Cc: linus.walleij@...aro.org, andrew@...n.ch, vivien.didelot@...il.com,
f.fainelli@...il.com, olteanv@...il.com, alsi@...g-olufsen.dk,
arinc.unal@...nc9.com,
Luiz Angelo Daros de Luca <luizluca@...il.com>
Subject: [PATCH net-next v2 08/13] dt-bindings: net: dsa: realtek-mdio: document new interface
realtek-mdio is a new mdio driver for realtek switches that use
mdio (instead of SMI) interface.
Reviewed-by: Arınç ÜNAL <arinc.unal@...nc9.com>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@...il.com>
---
.../bindings/net/dsa/realtek-mdio.txt | 91 +++++++++++++++++++
MAINTAINERS | 2 +-
2 files changed, 92 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/net/dsa/realtek-mdio.txt
diff --git a/Documentation/devicetree/bindings/net/dsa/realtek-mdio.txt b/Documentation/devicetree/bindings/net/dsa/realtek-mdio.txt
new file mode 100644
index 000000000000..71e0a3d09aeb
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/realtek-mdio.txt
@@ -0,0 +1,91 @@
+Realtek MDIO-based Switches
+==========================
+
+Realtek MDIO-based switches use MDIO protocol as opposed to Realtek
+SMI-based switches. The realtek-mdio driver is an mdio driver and it must
+be inserted inside an mdio node.
+
+Required properties:
+
+- compatible: must be exactly one of (same as realtek-smi):
+ "realtek,rtl8365mb" (4+1 ports)
+ "realtek,rtl8366" (not supported yet)
+ "realtek,rtl8366rb" (4+1 ports)
+ "realtek,rtl8366s" (4+1 ports) (not supported yet)
+ "realtek,rtl8367" (not supported yet)
+ "realtek,rtl8367b" (not supported yet)
+ "realtek,rtl8368s" (8 port) (not supported yet)
+ "realtek,rtl8369" (not supported yet)
+ "realtek,rtl8370" (8 port) (not supported yet)
+
+Required properties:
+- reg: MDIO PHY ID to access the switch
+
+Optional properties:
+- realtek,disable-leds: if the LED drivers are not used in the
+ hardware design this will disable them so they are not turned on
+ and wasting power.
+
+See net/dsa/dsa.txt for a list of additional required and optional properties
+and subnodes of DSA switches.
+
+Optional properties of dsa port:
+
+- realtek,ext-int: defines the external interface number (0, 1, 2). By default, 1.
+
+Examples:
+
+An example for the RTL8367S:
+
+&mdio0 {
+ switch {
+ compatible = "realtek,rtl8367s";
+ reg = <29>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan4";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan3";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan1";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@7 {
+ reg = <7>;
+ ethernet = <ðernet>;
+ phy-mode = "rgmii";
+ realtek,ext-int = <2>;
+ tx-internal-delay-ps = <2000>;
+ rx-internal-delay-ps = <0>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+};
+
diff --git a/MAINTAINERS b/MAINTAINERS
index a8f949b368a8..750f5c68c5fa 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16152,7 +16152,7 @@ F: sound/soc/codecs/rt*
REALTEK RTL83xx SMI DSA ROUTER CHIPS
M: Linus Walleij <linus.walleij@...aro.org>
S: Maintained
-F: Documentation/devicetree/bindings/net/dsa/realtek-smi.txt
+F: Documentation/devicetree/bindings/net/dsa/realtek-*.txt
F: drivers/net/dsa/realtek/*
REALTEK WIRELESS DRIVER (rtlwifi family)
--
2.34.0
Powered by blists - more mailing lists