netdev - Re: [PATCH] of: net: support NVMEM cells with MAC in text format

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 29 Dec 2021 23:04:51 +0100
From:   Michael Walle <michael@...le.cc>
To:     Jakub Kicinski <kuba@...nel.org>
Cc:     zajec5@...il.com, andrew@...n.ch, davem@...emloft.net,
        devicetree@...r.kernel.org, hkallweit1@...il.com,
        linux-kernel@...r.kernel.org, linux@...linux.org.uk,
        netdev@...r.kernel.org, rafal@...ecki.pl, robh+dt@...nel.org,
        Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
Subject: Re: [PATCH] of: net: support NVMEM cells with MAC in text format

Am 2021-12-29 19:18, schrieb Jakub Kicinski:
> On Wed, 29 Dec 2021 13:40:47 +0100 Michael Walle wrote:
>> > Some NVMEM devices have text based cells. In such cases MAC is stored in
>> > a XX:XX:XX:XX:XX:XX format. Use mac_pton() to parse such data and
>> > support those NVMEM cells. This is required to support e.g. a very
>> > popular U-Boot and its environment variables.
>> >
>> > Signed-off-by: Rafał Miłecki <rafal@...ecki.pl>
>> > ---
>> > Please let me know if checking NVMEM cell length (6 B vs. 17 B) can be
>> > considered a good enough solution. Alternatively we could use some DT
>> > property to make it explicity, e.g. something like:
>> >
>> > ethernet@...24000 {
>> > 	compatible = "brcm,amac";
>> > 	reg = <0x18024000 0x800>;
>> >
>> > 	nvmem-cells = <&mac_addr>;
>> > 	nvmem-cell-names = "mac-address";
>> > 	nvmem-mac-format = "text";
>> > };
>> 
>> Please note, that there is also this proposal, which had such a 
>> conversion
>> in mind:
>> https://lore.kernel.org/linux-devicetree/20211228142549.1275412-1-michael@walle.cc/
>> 
>> With this patch, there are now two different places where a mac 
>> address
>> format is converted. In of_get_mac_addr_nvmem() and in the imx otp 
>> driver.
>> And both have their shortcomings and aren't really flexible. Eg. this 
>> one
>> magically detects the format by comparing the length, but can't be 
>> used for
>> to swap bytes (because the length is also ETH_ALEN), which apparently 
>> is a
>> use case in the imx otp driver. And having the conversion in an nvmem
>> provider device driver is still a bad thing IMHO.
>> 
>> I'd really like to see all these kind of transformations in one place.
> 
> FWIW offsetting from a common base address is relatively common, that's
> why we have:
> 
> /**
>  * eth_hw_addr_gen - Generate and assign Ethernet address to a port
>  * @dev: pointer to port's net_device structure
>  * @base_addr: base Ethernet address
>  * @id: offset to add to the base address
>  *
>  * Generate a MAC address using a base address and an offset and assign 
> it
>  * to a net_device. Commonly used by switch drivers which need to 
> compute
>  * addresses for all their ports. addr_assign_type is not changed.
>  */
> static inline void eth_hw_addr_gen(struct net_device *dev, const u8 
> *base_addr,
> 				   unsigned int id)

I didn't know that. But it doesn't help me that much because it mostly
used for switches, but in my case, I also have up to four network
cards (enetc) on the SoC; besides a network switch (felix). But
only one source for the base mac address.

-michael