lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220103150812.87914-7-toke@redhat.com> Date: Mon, 3 Jan 2022 16:08:11 +0100 From: Toke Høiland-Jørgensen <toke@...hat.com> To: Alexei Starovoitov <ast@...nel.org>, Daniel Borkmann <daniel@...earbox.net>, Andrii Nakryiko <andrii@...nel.org>, Martin KaFai Lau <kafai@...com>, Song Liu <songliubraving@...com>, Yonghong Song <yhs@...com>, John Fastabend <john.fastabend@...il.com>, KP Singh <kpsingh@...nel.org>, "David S. Miller" <davem@...emloft.net>, Jakub Kicinski <kuba@...nel.org>, Jesper Dangaard Brouer <hawk@...nel.org> Cc: Toke Høiland-Jørgensen <toke@...hat.com>, netdev@...r.kernel.org, bpf@...r.kernel.org Subject: [PATCH bpf-next v5 6/7] bpf: Add "live packet" mode for XDP in bpf_prog_run() This adds support for running XDP programs through bpf_prog_run() in a mode that enables live packet processing of the resulting frames. Previous uses of bpf_prog_run() for XDP returned the XDP program return code and the modified packet data to userspace, which is useful for unit testing of XDP programs. This patch adds a new mode with different semantics. When enabled through the new BPF_F_TEST_XDP_LIVE_FRAMES flag, the XDP program return codes will be honoured: returning XDP_PASS will result in the frame being injected into the networking stack as if it came from the selected networking interface, while returning XDP_TX and XDP_REDIRECT will result in the frame being transmitted out an egress interface. XDP_TX is translated into an XDP_REDIRECT operation, since the real XDP_TX action is only possible from within the network drivers themselves, not from the process context where bpf_prog_run() is executed. To achieve this new mode of operation, we create a page pool instance while setting up the test run, and feed pages from that into the XDP program. The setup cost of this is amortised over the number of repetitions specified by userspace. To support performance testing use case, we further optimise the setup step so that all pages in the pool are pre-initialised with the packet data, and pre-computed context and xdp_frame objects stored at the start of each page. This makes it possible to entirely avoid touching the page content on each XDP program invocation, and enables sending up to 11.5 Mpps/core on my test box. Because the data pages are recycled by the page pool, and the test runner doesn't re-initialise them for each run, subsequent invocations of the XDP program will see the packet data in the state it was after the last time it ran on that particular page. This means that an XDP program that modifies the packet before redirecting it has to be careful about which assumptions it makes about the packet content, but that is only an issue for the most naively written programs. Enabling the new flag is only allowed when not setting ctx_out and data_out in the test specification, since using it means frames will be redirected somewhere else, so they can't be returned. Signed-off-by: Toke Høiland-Jørgensen <toke@...hat.com> --- include/uapi/linux/bpf.h | 2 + kernel/bpf/Kconfig | 1 + net/bpf/test_run.c | 287 ++++++++++++++++++++++++++++++++- tools/include/uapi/linux/bpf.h | 2 + 4 files changed, 284 insertions(+), 8 deletions(-) diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index b0383d371b9a..5ef20deaf49f 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -1225,6 +1225,8 @@ enum { /* If set, run the test on the cpu specified by bpf_attr.test.cpu */ #define BPF_F_TEST_RUN_ON_CPU (1U << 0) +/* If set, XDP frames will be transmitted after processing */ +#define BPF_F_TEST_XDP_LIVE_FRAMES (1U << 1) /* type for BPF_ENABLE_STATS */ enum bpf_stats_type { diff --git a/kernel/bpf/Kconfig b/kernel/bpf/Kconfig index d24d518ddd63..c8c920020d11 100644 --- a/kernel/bpf/Kconfig +++ b/kernel/bpf/Kconfig @@ -30,6 +30,7 @@ config BPF_SYSCALL select TASKS_TRACE_RCU select BINARY_PRINTF select NET_SOCK_MSG if NET + select PAGE_POOL if NET default n help Enable the bpf() system call that allows to manipulate BPF programs diff --git a/net/bpf/test_run.c b/net/bpf/test_run.c index 46dd95755967..11543819f0ef 100644 --- a/net/bpf/test_run.c +++ b/net/bpf/test_run.c @@ -14,6 +14,7 @@ #include <net/sock.h> #include <net/tcp.h> #include <net/net_namespace.h> +#include <net/page_pool.h> #include <linux/error-injection.h> #include <linux/smp.h> #include <linux/sock_diag.h> @@ -52,10 +53,11 @@ static void bpf_test_timer_leave(struct bpf_test_timer *t) rcu_read_unlock(); } -static bool bpf_test_timer_continue(struct bpf_test_timer *t, u32 repeat, int *err, u32 *duration) +static bool bpf_test_timer_continue(struct bpf_test_timer *t, int iterations, + u32 repeat, int *err, u32 *duration) __must_hold(rcu) { - t->i++; + t->i += iterations; if (t->i >= repeat) { /* We're done. */ t->time_spent += ktime_get_ns() - t->time_start; @@ -87,6 +89,267 @@ static bool bpf_test_timer_continue(struct bpf_test_timer *t, u32 repeat, int *e return false; } +/* We put this struct at the head of each page with a context and frame + * initialised when the page is allocated, so we don't have to do this on each + * repetition of the test run. + */ +struct xdp_page_head { + struct xdp_buff orig_ctx; + struct xdp_buff ctx; + struct xdp_frame frm; + u8 data[]; +}; + +struct xdp_test_data { + struct xdp_buff *orig_ctx; + struct xdp_rxq_info rxq; + struct net_device *dev; + struct page_pool *pp; + u32 frame_cnt; +}; + +#define TEST_XDP_FRAME_SIZE (PAGE_SIZE - sizeof(struct xdp_page_head) \ + - sizeof(struct skb_shared_info)) +#define TEST_XDP_BATCH 64 + +static void xdp_test_run_init_page(struct page *page, void *arg) +{ + struct xdp_page_head *head = phys_to_virt(page_to_phys(page)); + struct xdp_buff *new_ctx, *orig_ctx; + u32 headroom = XDP_PACKET_HEADROOM; + struct xdp_test_data *xdp = arg; + size_t frm_len, meta_len; + struct xdp_frame *frm; + void *data; + + orig_ctx = xdp->orig_ctx; + frm_len = orig_ctx->data_end - orig_ctx->data_meta; + meta_len = orig_ctx->data - orig_ctx->data_meta; + headroom -= meta_len; + + new_ctx = &head->ctx; + frm = &head->frm; + data = &head->data; + memcpy(data + headroom, orig_ctx->data_meta, frm_len); + + xdp_init_buff(new_ctx, TEST_XDP_FRAME_SIZE, &xdp->rxq); + xdp_prepare_buff(new_ctx, data, headroom, frm_len, true); + new_ctx->data_meta = new_ctx->data + meta_len; + + xdp_update_frame_from_buff(new_ctx, frm); + frm->mem = new_ctx->rxq->mem; + + memcpy(&head->orig_ctx, new_ctx, sizeof(head->orig_ctx)); +} + +static int xdp_test_run_setup(struct xdp_test_data *xdp, struct xdp_buff *orig_ctx) +{ + struct xdp_mem_info mem = {}; + struct page_pool *pp; + int err; + struct page_pool_params pp_params = { + .order = 0, + .flags = 0, + .pool_size = NAPI_POLL_WEIGHT * 2, + .nid = NUMA_NO_NODE, + .max_len = TEST_XDP_FRAME_SIZE, + .init_callback = xdp_test_run_init_page, + .init_arg = xdp, + }; + + pp = page_pool_create(&pp_params); + if (IS_ERR(pp)) + return PTR_ERR(pp); + + /* will copy 'mem.id' into pp->xdp_mem_id */ + err = xdp_reg_mem_model(&mem, MEM_TYPE_PAGE_POOL, pp); + if (err) { + page_pool_destroy(pp); + return err; + } + xdp->pp = pp; + + /* We create a 'fake' RXQ referencing the original dev, but with an + * xdp_mem_info pointing to our page_pool + */ + xdp_rxq_info_reg(&xdp->rxq, orig_ctx->rxq->dev, 0, 0); + xdp->rxq.mem.type = MEM_TYPE_PAGE_POOL; + xdp->rxq.mem.id = pp->xdp_mem_id; + xdp->dev = orig_ctx->rxq->dev; + xdp->orig_ctx = orig_ctx; + + return 0; +} + +static void xdp_test_run_teardown(struct xdp_test_data *xdp) +{ + struct xdp_mem_info mem = { + .id = xdp->pp->xdp_mem_id, + .type = MEM_TYPE_PAGE_POOL, + }; + + xdp_unreg_mem_model(&mem); +} + +static bool ctx_was_changed(struct xdp_page_head *head) +{ + return head->orig_ctx.data != head->ctx.data || + head->orig_ctx.data_meta != head->ctx.data_meta || + head->orig_ctx.data_end != head->ctx.data_end; +} + +static void reset_ctx(struct xdp_page_head *head) +{ + if (likely(!ctx_was_changed(head))) + return; + + head->ctx.data = head->orig_ctx.data; + head->ctx.data_meta = head->orig_ctx.data_meta; + head->ctx.data_end = head->orig_ctx.data_end; + xdp_update_frame_from_buff(&head->ctx, &head->frm); +} + +static int xdp_recv_frames(struct xdp_frame **frames, int nframes, + struct net_device *dev) +{ + gfp_t gfp = __GFP_ZERO | GFP_ATOMIC; + void *skbs[TEST_XDP_BATCH]; + int i, n; + LIST_HEAD(list); + + n = kmem_cache_alloc_bulk(skbuff_head_cache, gfp, nframes, skbs); + if (unlikely(n == 0)) { + for (i = 0; i < nframes; i++) + xdp_return_frame(frames[i]); + return -ENOMEM; + } + + for (i = 0; i < nframes; i++) { + struct xdp_frame *xdpf = frames[i]; + struct sk_buff *skb = skbs[i]; + + skb = __xdp_build_skb_from_frame(xdpf, skb, dev); + if (!skb) { + xdp_return_frame(xdpf); + continue; + } + + list_add_tail(&skb->list, &list); + } + netif_receive_skb_list(&list); + return 0; +} + +static int xdp_test_run_batch(struct xdp_test_data *xdp, struct bpf_prog *prog, + u32 repeat) +{ + struct bpf_redirect_info *ri = this_cpu_ptr(&bpf_redirect_info); + int err = 0, act, ret, i, nframes = 0, batch_sz; + struct xdp_frame *frames[TEST_XDP_BATCH]; + struct xdp_page_head *head; + struct xdp_frame *frm; + bool redirect = false; + struct xdp_buff *ctx; + struct page *page; + + batch_sz = min_t(u32, repeat, TEST_XDP_BATCH); + xdp_set_return_frame_no_direct(); + + for (i = 0; i < batch_sz; i++) { + page = page_pool_dev_alloc_pages(xdp->pp); + if (!page) { + err = -ENOMEM; + goto out; + } + + head = phys_to_virt(page_to_phys(page)); + reset_ctx(head); + ctx = &head->ctx; + frm = &head->frm; + xdp->frame_cnt++; + + act = bpf_prog_run_xdp(prog, ctx); + + /* if program changed pkt bounds we need to update the xdp_frame */ + if (unlikely(ctx_was_changed(head))) { + err = xdp_update_frame_from_buff(ctx, frm); + if (err) { + xdp_return_buff(ctx); + goto out; + } + } + + switch (act) { + case XDP_TX: + /* we can't do a real XDP_TX since we're not in the + * driver, so turn it into a REDIRECT back to the same + * index + */ + ri->tgt_index = xdp->dev->ifindex; + ri->map_id = INT_MAX; + ri->map_type = BPF_MAP_TYPE_UNSPEC; + fallthrough; + case XDP_REDIRECT: + redirect = true; + err = xdp_do_redirect_frame(xdp->dev, ctx, frm, prog); + if (err) { + xdp_return_buff(ctx); + goto out; + } + break; + case XDP_PASS: + frames[nframes++] = frm; + break; + default: + bpf_warn_invalid_xdp_action(NULL, prog, act); + fallthrough; + case XDP_DROP: + xdp_return_buff(ctx); + break; + } + } + +out: + if (redirect) + xdp_do_flush(); + if (nframes) { + ret = xdp_recv_frames(frames, nframes, xdp->dev); + if (ret) + err = ret; + } + + xdp_clear_return_frame_no_direct(); + return err; +} + +static int bpf_test_run_xdp_live(struct bpf_prog *prog, struct xdp_buff *ctx, + u32 repeat, u32 *time) + +{ + struct bpf_test_timer t = { .mode = NO_MIGRATE }; + struct xdp_test_data xdp = {}; + int ret; + + if (!repeat) + repeat = 1; + + ret = xdp_test_run_setup(&xdp, ctx); + if (ret) + return ret; + + bpf_test_timer_enter(&t); + do { + xdp.frame_cnt = 0; + ret = xdp_test_run_batch(&xdp, prog, repeat - t.i); + if (unlikely(ret < 0)) + break; + } while (bpf_test_timer_continue(&t, xdp.frame_cnt, repeat, &ret, time)); + bpf_test_timer_leave(&t); + + xdp_test_run_teardown(&xdp); + return ret; +} + static int bpf_test_run(struct bpf_prog *prog, void *ctx, u32 repeat, u32 *retval, u32 *time, bool xdp) { @@ -118,7 +381,7 @@ static int bpf_test_run(struct bpf_prog *prog, void *ctx, u32 repeat, *retval = bpf_prog_run_xdp(prog, ctx); else *retval = bpf_prog_run(prog, ctx); - } while (bpf_test_timer_continue(&t, repeat, &ret, time)); + } while (bpf_test_timer_continue(&t, 1, repeat, &ret, time)); bpf_reset_run_ctx(old_ctx); bpf_test_timer_leave(&t); @@ -757,13 +1020,14 @@ static void xdp_convert_buff_to_md(struct xdp_buff *xdp, struct xdp_md *xdp_md) int bpf_prog_test_run_xdp(struct bpf_prog *prog, const union bpf_attr *kattr, union bpf_attr __user *uattr) { + bool do_live = (kattr->test.flags & BPF_F_TEST_XDP_LIVE_FRAMES); u32 tailroom = SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); u32 headroom = XDP_PACKET_HEADROOM; u32 size = kattr->test.data_size_in; u32 repeat = kattr->test.repeat; struct netdev_rx_queue *rxqueue; struct xdp_buff xdp = {}; - u32 retval, duration; + u32 retval = 0, duration; struct xdp_md *ctx; u32 max_data_sz; void *data; @@ -773,6 +1037,9 @@ int bpf_prog_test_run_xdp(struct bpf_prog *prog, const union bpf_attr *kattr, prog->expected_attach_type == BPF_XDP_CPUMAP) return -EINVAL; + if (kattr->test.flags & ~BPF_F_TEST_XDP_LIVE_FRAMES) + return -EINVAL; + ctx = bpf_ctx_init(kattr, sizeof(struct xdp_md)); if (IS_ERR(ctx)) return PTR_ERR(ctx); @@ -781,7 +1048,8 @@ int bpf_prog_test_run_xdp(struct bpf_prog *prog, const union bpf_attr *kattr, /* There can't be user provided data before the meta data */ if (ctx->data_meta || ctx->data_end != size || ctx->data > ctx->data_end || - unlikely(xdp_metalen_invalid(ctx->data))) + unlikely(xdp_metalen_invalid(ctx->data)) || + (do_live && (kattr->test.data_out || kattr->test.ctx_out))) goto free_ctx; /* Meta data is allocated from the headroom */ headroom -= ctx->data; @@ -807,7 +1075,10 @@ int bpf_prog_test_run_xdp(struct bpf_prog *prog, const union bpf_attr *kattr, if (repeat > 1) bpf_prog_change_xdp(NULL, prog); - ret = bpf_test_run(prog, &xdp, repeat, &retval, &duration, true); + if (do_live) + ret = bpf_test_run_xdp_live(prog, &xdp, repeat, &duration); + else + ret = bpf_test_run(prog, &xdp, repeat, &retval, &duration, true); /* We convert the xdp_buff back to an xdp_md before checking the return * code so the reference count of any held netdevice will be decremented * even if the test run failed. @@ -905,7 +1176,7 @@ int bpf_prog_test_run_flow_dissector(struct bpf_prog *prog, do { retval = bpf_flow_dissect(prog, &ctx, eth->h_proto, ETH_HLEN, size, flags); - } while (bpf_test_timer_continue(&t, repeat, &ret, &duration)); + } while (bpf_test_timer_continue(&t, 1, repeat, &ret, &duration)); bpf_test_timer_leave(&t); if (ret < 0) @@ -1000,7 +1271,7 @@ int bpf_prog_test_run_sk_lookup(struct bpf_prog *prog, const union bpf_attr *kat do { ctx.selected_sk = NULL; retval = BPF_PROG_SK_LOOKUP_RUN_ARRAY(progs, ctx, bpf_prog_run); - } while (bpf_test_timer_continue(&t, repeat, &ret, &duration)); + } while (bpf_test_timer_continue(&t, 1, repeat, &ret, &duration)); bpf_test_timer_leave(&t); if (ret < 0) diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h index b0383d371b9a..5ef20deaf49f 100644 --- a/tools/include/uapi/linux/bpf.h +++ b/tools/include/uapi/linux/bpf.h @@ -1225,6 +1225,8 @@ enum { /* If set, run the test on the cpu specified by bpf_attr.test.cpu */ #define BPF_F_TEST_RUN_ON_CPU (1U << 0) +/* If set, XDP frames will be transmitted after processing */ +#define BPF_F_TEST_XDP_LIVE_FRAMES (1U << 1) /* type for BPF_ENABLE_STATS */ enum bpf_stats_type { -- 2.34.1
Powered by blists - more mailing lists