| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 4 Jan 2022 15:56:45 +0100
From: Neil Armstrong <narmstrong@...libre.com>
To: davem@...emloft.net, kuba@...nel.org
Cc: netdev@...r.kernel.org, linux-oxnas@...ups.io,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Neil Armstrong <narmstrong@...libre.com>
Subject: [PATCH net-next v2 2/3] net: stmmac: dwmac-oxnas: Add support for OX810SE
Add support for OX810SE dwmac glue setup, which is a simplified version
of the OX820 introduced later with more control on the PHY interface.
Signed-off-by: Neil Armstrong <narmstrong@...libre.com>
---
.../net/ethernet/stmicro/stmmac/dwmac-oxnas.c | 115 +++++++++++++-----
1 file changed, 86 insertions(+), 29 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-oxnas.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-oxnas.c
index adfeb8d3293d..62a69a91ab22 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-oxnas.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-oxnas.c
@@ -12,6 +12,7 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/mfd/syscon.h>
@@ -48,16 +49,75 @@
#define DWMAC_RX_VARDELAY(d) ((d) << DWMAC_RX_VARDELAY_SHIFT)
#define DWMAC_RXN_VARDELAY(d) ((d) << DWMAC_RXN_VARDELAY_SHIFT)
+struct oxnas_dwmac;
+
+struct oxnas_dwmac_data {
+ int (*setup)(struct oxnas_dwmac *dwmac);
+};
+
struct oxnas_dwmac {
struct device *dev;
struct clk *clk;
struct regmap *regmap;
+ const struct oxnas_dwmac_data *data;
};
+static int oxnas_dwmac_setup_ox810se(struct oxnas_dwmac *dwmac)
+{
+ unsigned int value;
+ int ret;
+
+ ret = regmap_read(dwmac->regmap, OXNAS_DWMAC_CTRL_REGOFFSET, &value);
+ if (ret < 0)
+ return ret;
+
+ /* Enable GMII_GTXCLK to follow GMII_REFCLK, required for gigabit PHY */
+ value |= BIT(DWMAC_CKEN_GTX) |
+ /* Use simple mux for 25/125 Mhz clock switching */
+ BIT(DWMAC_SIMPLE_MUX);
+
+ regmap_write(dwmac->regmap, OXNAS_DWMAC_CTRL_REGOFFSET, value);
+
+ return 0;
+}
+
+static int oxnas_dwmac_setup_ox820(struct oxnas_dwmac *dwmac)
+{
+ unsigned int value;
+ int ret;
+
+ ret = regmap_read(dwmac->regmap, OXNAS_DWMAC_CTRL_REGOFFSET, &value);
+ if (ret < 0)
+ return ret;
+
+ /* Enable GMII_GTXCLK to follow GMII_REFCLK, required for gigabit PHY */
+ value |= BIT(DWMAC_CKEN_GTX) |
+ /* Use simple mux for 25/125 Mhz clock switching */
+ BIT(DWMAC_SIMPLE_MUX) |
+ /* set auto switch tx clock source */
+ BIT(DWMAC_AUTO_TX_SOURCE) |
+ /* enable tx & rx vardelay */
+ BIT(DWMAC_CKEN_TX_OUT) |
+ BIT(DWMAC_CKEN_TXN_OUT) |
+ BIT(DWMAC_CKEN_TX_IN) |
+ BIT(DWMAC_CKEN_RX_OUT) |
+ BIT(DWMAC_CKEN_RXN_OUT) |
+ BIT(DWMAC_CKEN_RX_IN);
+ regmap_write(dwmac->regmap, OXNAS_DWMAC_CTRL_REGOFFSET, value);
+
+ /* set tx & rx vardelay */
+ value = DWMAC_TX_VARDELAY(4) |
+ DWMAC_TXN_VARDELAY(2) |
+ DWMAC_RX_VARDELAY(10) |
+ DWMAC_RXN_VARDELAY(8);
+ regmap_write(dwmac->regmap, OXNAS_DWMAC_DELAY_REGOFFSET, value);
+
+ return 0;
+}
+
static int oxnas_dwmac_init(struct platform_device *pdev, void *priv)
{
struct oxnas_dwmac *dwmac = priv;
- unsigned int value;
int ret;
/* Reset HW here before changing the glue configuration */
@@ -69,35 +129,11 @@ static int oxnas_dwmac_init(struct platform_device *pdev, void *priv)
if (ret)
return ret;
- ret = regmap_read(dwmac->regmap, OXNAS_DWMAC_CTRL_REGOFFSET, &value);
- if (ret < 0) {
+ ret = dwmac->data->setup(dwmac);
+ if (ret)
clk_disable_unprepare(dwmac->clk);
- return ret;
- }
- /* Enable GMII_GTXCLK to follow GMII_REFCLK, required for gigabit PHY */
- value |= BIT(DWMAC_CKEN_GTX) |
- /* Use simple mux for 25/125 Mhz clock switching */
- BIT(DWMAC_SIMPLE_MUX) |
- /* set auto switch tx clock source */
- BIT(DWMAC_AUTO_TX_SOURCE) |
- /* enable tx & rx vardelay */
- BIT(DWMAC_CKEN_TX_OUT) |
- BIT(DWMAC_CKEN_TXN_OUT) |
- BIT(DWMAC_CKEN_TX_IN) |
- BIT(DWMAC_CKEN_RX_OUT) |
- BIT(DWMAC_CKEN_RXN_OUT) |
- BIT(DWMAC_CKEN_RX_IN);
- regmap_write(dwmac->regmap, OXNAS_DWMAC_CTRL_REGOFFSET, value);
-
- /* set tx & rx vardelay */
- value = DWMAC_TX_VARDELAY(4) |
- DWMAC_TXN_VARDELAY(2) |
- DWMAC_RX_VARDELAY(10) |
- DWMAC_RXN_VARDELAY(8);
- regmap_write(dwmac->regmap, OXNAS_DWMAC_DELAY_REGOFFSET, value);
-
- return 0;
+ return ret;
}
static void oxnas_dwmac_exit(struct platform_device *pdev, void *priv)
@@ -128,6 +164,12 @@ static int oxnas_dwmac_probe(struct platform_device *pdev)
goto err_remove_config_dt;
}
+ dwmac->data = (const struct oxnas_dwmac_data *)of_device_get_match_data(&pdev->dev);
+ if (!dwmac->data) {
+ ret = -EINVAL;
+ goto err_remove_config_dt;
+ }
+
dwmac->dev = &pdev->dev;
plat_dat->bsp_priv = dwmac;
plat_dat->init = oxnas_dwmac_init;
@@ -166,8 +208,23 @@ static int oxnas_dwmac_probe(struct platform_device *pdev)
return ret;
}
+static const struct oxnas_dwmac_data ox810se_dwmac_data = {
+ .setup = oxnas_dwmac_setup_ox810se,
+};
+
+static const struct oxnas_dwmac_data ox820_dwmac_data = {
+ .setup = oxnas_dwmac_setup_ox820,
+};
+
static const struct of_device_id oxnas_dwmac_match[] = {
- { .compatible = "oxsemi,ox820-dwmac" },
+ {
+ .compatible = "oxsemi,ox810se-dwmac",
+ .data = &ox810se_dwmac_data,
+ },
+ {
+ .compatible = "oxsemi,ox820-dwmac",
+ .data = &ox820_dwmac_data,
+ },
{ }
};
MODULE_DEVICE_TABLE(of, oxnas_dwmac_match);
--
2.25.1
Powered by blists - more mailing lists