| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220104171413.2293847-13-vladimir.oltean@nxp.com>
Date: Tue, 4 Jan 2022 19:14:10 +0200
From: Vladimir Oltean <vladimir.oltean@....com>
To: netdev@...r.kernel.org
Cc: "David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>, Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Florian Fainelli <f.fainelli@...il.com>
Subject: [PATCH net-next 12/15] net: dsa: merge all bools of struct dsa_switch into a single u32
struct dsa_switch has 9 boolean properties, many of which are in fact
set by drivers for custom behavior (vlan_filtering_is_global,
needs_standalone_vlan_filtering, etc etc). The binary layout of the
structure could be improved. For example, the "bool setup" at the
beginning introduces a gratuitous 7 byte hole in the first cache line.
The change merges all boolean properties into bitfields of an u32, and
places that u32 in the first cache line of the structure, since many
bools are accessed from the data path (untag_bridge_pvid, vlan_filtering,
vlan_filtering_is_global).
We place this u32 after the existing ds->index, which is also 4 bytes in
size. As a positive side effect, ds->tagger_data now fits into the first
cache line too, because 4 bytes are saved.
Before:
pahole -C dsa_switch net/dsa/slave.o
struct dsa_switch {
bool setup; /* 0 1 */
/* XXX 7 bytes hole, try to pack */
struct device * dev; /* 8 8 */
struct dsa_switch_tree * dst; /* 16 8 */
unsigned int index; /* 24 4 */
/* XXX 4 bytes hole, try to pack */
struct notifier_block nb; /* 32 24 */
/* XXX last struct has 4 bytes of padding */
void * priv; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
void * tagger_data; /* 64 8 */
struct dsa_chip_data * cd; /* 72 8 */
const struct dsa_switch_ops * ops; /* 80 8 */
u32 phys_mii_mask; /* 88 4 */
/* XXX 4 bytes hole, try to pack */
struct mii_bus * slave_mii_bus; /* 96 8 */
unsigned int ageing_time_min; /* 104 4 */
unsigned int ageing_time_max; /* 108 4 */
struct dsa_8021q_context * tag_8021q_ctx; /* 112 8 */
struct devlink * devlink; /* 120 8 */
/* --- cacheline 2 boundary (128 bytes) --- */
unsigned int num_tx_queues; /* 128 4 */
bool vlan_filtering_is_global; /* 132 1 */
bool needs_standalone_vlan_filtering; /* 133 1 */
bool configure_vlan_while_not_filtering; /* 134 1 */
bool untag_bridge_pvid; /* 135 1 */
bool assisted_learning_on_cpu_port; /* 136 1 */
bool vlan_filtering; /* 137 1 */
bool pcs_poll; /* 138 1 */
bool mtu_enforcement_ingress; /* 139 1 */
unsigned int num_lag_ids; /* 140 4 */
unsigned int max_num_bridges; /* 144 4 */
/* XXX 4 bytes hole, try to pack */
size_t num_ports; /* 152 8 */
/* size: 160, cachelines: 3, members: 27 */
/* sum members: 141, holes: 4, sum holes: 19 */
/* paddings: 1, sum paddings: 4 */
/* last cacheline: 32 bytes */
};
After:
pahole -C dsa_switch net/dsa/slave.o
struct dsa_switch {
struct device * dev; /* 0 8 */
struct dsa_switch_tree * dst; /* 8 8 */
unsigned int index; /* 16 4 */
u32 setup:1; /* 20: 0 4 */
u32 vlan_filtering_is_global:1; /* 20: 1 4 */
u32 needs_standalone_vlan_filtering:1; /* 20: 2 4 */
u32 configure_vlan_while_not_filtering:1; /* 20: 3 4 */
u32 untag_bridge_pvid:1; /* 20: 4 4 */
u32 assisted_learning_on_cpu_port:1; /* 20: 5 4 */
u32 vlan_filtering:1; /* 20: 6 4 */
u32 pcs_poll:1; /* 20: 7 4 */
u32 mtu_enforcement_ingress:1; /* 20: 8 4 */
/* XXX 23 bits hole, try to pack */
struct notifier_block nb; /* 24 24 */
/* XXX last struct has 4 bytes of padding */
void * priv; /* 48 8 */
void * tagger_data; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct dsa_chip_data * cd; /* 64 8 */
const struct dsa_switch_ops * ops; /* 72 8 */
u32 phys_mii_mask; /* 80 4 */
/* XXX 4 bytes hole, try to pack */
struct mii_bus * slave_mii_bus; /* 88 8 */
unsigned int ageing_time_min; /* 96 4 */
unsigned int ageing_time_max; /* 100 4 */
struct dsa_8021q_context * tag_8021q_ctx; /* 104 8 */
struct devlink * devlink; /* 112 8 */
unsigned int num_tx_queues; /* 120 4 */
unsigned int num_lag_ids; /* 124 4 */
/* --- cacheline 2 boundary (128 bytes) --- */
unsigned int max_num_bridges; /* 128 4 */
/* XXX 4 bytes hole, try to pack */
size_t num_ports; /* 136 8 */
/* size: 144, cachelines: 3, members: 27 */
/* sum members: 132, holes: 2, sum holes: 8 */
/* sum bitfield members: 9 bits, bit holes: 1, sum bit holes: 23 bits */
/* paddings: 1, sum paddings: 4 */
/* last cacheline: 16 bytes */
};
Signed-off-by: Vladimir Oltean <vladimir.oltean@....com>
---
include/net/dsa.h | 97 +++++++++++++++++++++++++----------------------
1 file changed, 51 insertions(+), 46 deletions(-)
diff --git a/include/net/dsa.h b/include/net/dsa.h
index 5e42fa7ea377..a8a586039033 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -321,8 +321,6 @@ struct dsa_mac_addr {
};
struct dsa_switch {
- bool setup;
-
struct device *dev;
/*
@@ -331,6 +329,57 @@ struct dsa_switch {
struct dsa_switch_tree *dst;
unsigned int index;
+ u32 setup:1,
+ /* Disallow bridge core from requesting
+ * different VLAN awareness settings on ports
+ * if not hardware-supported
+ */
+ vlan_filtering_is_global:1,
+ /* Keep VLAN filtering enabled on ports not
+ * offloading any upper
+ */
+ needs_standalone_vlan_filtering:1,
+ /* Pass .port_vlan_add and .port_vlan_del to
+ * drivers even for bridges that have
+ * vlan_filtering=0. All drivers should ideally
+ * set this (and then the option would get
+ * removed), but it is unknown whether this
+ * would break things or not.
+ */
+ configure_vlan_while_not_filtering:1,
+ /* If the switch driver always programs the CPU
+ * port as egress tagged despite the VLAN
+ * configuration indicating otherwise, then
+ * setting @untag_bridge_pvid will force the
+ * DSA receive path to pop the bridge's
+ * default_pvid VLAN tagged frames to offer a
+ * consistent behavior between a
+ * vlan_filtering=0 and vlan_filtering=1 bridge
+ * device.
+ */
+ untag_bridge_pvid:1,
+ /* Let DSA manage the FDB entries towards the
+ * CPU, based on the software bridge database.
+ */
+ assisted_learning_on_cpu_port:1,
+ /* In case vlan_filtering_is_global is set, the
+ * VLAN awareness state should be retrieved
+ * from here and not from the per-port
+ * settings.
+ */
+ vlan_filtering:1,
+ /* MAC PCS does not provide link state change
+ * interrupt, and requires polling. Flag passed
+ * on to PHYLINK.
+ */
+ pcs_poll:1,
+ /* For switches that only have the MRU
+ * configurable. To ensure the configured MTU
+ * is not exceeded, normalization of MRU on all
+ * bridged interfaces is needed.
+ */
+ mtu_enforcement_ingress:1;
+
/* Listener for switch fabric events */
struct notifier_block nb;
@@ -371,50 +420,6 @@ struct dsa_switch {
/* Number of switch port queues */
unsigned int num_tx_queues;
- /* Disallow bridge core from requesting different VLAN awareness
- * settings on ports if not hardware-supported
- */
- bool vlan_filtering_is_global;
-
- /* Keep VLAN filtering enabled on ports not offloading any upper. */
- bool needs_standalone_vlan_filtering;
-
- /* Pass .port_vlan_add and .port_vlan_del to drivers even for bridges
- * that have vlan_filtering=0. All drivers should ideally set this (and
- * then the option would get removed), but it is unknown whether this
- * would break things or not.
- */
- bool configure_vlan_while_not_filtering;
-
- /* If the switch driver always programs the CPU port as egress tagged
- * despite the VLAN configuration indicating otherwise, then setting
- * @untag_bridge_pvid will force the DSA receive path to pop the bridge's
- * default_pvid VLAN tagged frames to offer a consistent behavior
- * between a vlan_filtering=0 and vlan_filtering=1 bridge device.
- */
- bool untag_bridge_pvid;
-
- /* Let DSA manage the FDB entries towards the CPU, based on the
- * software bridge database.
- */
- bool assisted_learning_on_cpu_port;
-
- /* In case vlan_filtering_is_global is set, the VLAN awareness state
- * should be retrieved from here and not from the per-port settings.
- */
- bool vlan_filtering;
-
- /* MAC PCS does not provide link state change interrupt, and requires
- * polling. Flag passed on to PHYLINK.
- */
- bool pcs_poll;
-
- /* For switches that only have the MRU configurable. To ensure the
- * configured MTU is not exceeded, normalization of MRU on all bridged
- * interfaces is needed.
- */
- bool mtu_enforcement_ingress;
-
/* Drivers that benefit from having an ID associated with each
* offloaded LAG should set this to the maximum number of
* supported IDs. DSA will then maintain a mapping of _at
--
2.25.1
Powered by blists - more mailing lists