| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220105131952.15693-1-paskripkin@gmail.com>
Date: Wed, 5 Jan 2022 16:19:52 +0300
From: Pavel Skripkin <paskripkin@...il.com>
To: davem@...emloft.net, kuba@...nel.org, linux@...pel-privat.de,
andrew@...n.ch, oneukum@...e.com, robert.foss@...labora.com,
freddy@...x.com.tw
Cc: linux-usb@...r.kernel.org, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org,
Pavel Skripkin <paskripkin@...il.com>,
syzbot+6ca9f7867b77c2d316ac@...kaller.appspotmail.com
Subject: [PATCH RFT] net: asix: add proper error handling of usb read errors
Syzbot once again hit uninit value in asix driver. The problem still the
same -- asix_read_cmd() reads less bytes, than was requested by caller.
Since all read requests are performed via asix_read_cmd() let's catch
usb related error there and add __must_check notation to be sure all
callers actually check return value.
So, this patch adds sanity check inside asix_read_cmd(), that simply
checks if bytes read are not less, than was requested and adds missing
error handling of asix_read_cmd() all across the driver code.
Fixes: d9fe64e51114 ("net: asix: Add in_pm parameter")
Reported-and-tested-by: syzbot+6ca9f7867b77c2d316ac@...kaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@...il.com>
---
drivers/net/usb/asix.h | 4 ++--
drivers/net/usb/asix_common.c | 19 +++++++++++++------
drivers/net/usb/asix_devices.c | 21 ++++++++++++++++++---
3 files changed, 33 insertions(+), 11 deletions(-)
diff --git a/drivers/net/usb/asix.h b/drivers/net/usb/asix.h
index 2a1e31defe71..4334aafab59a 100644
--- a/drivers/net/usb/asix.h
+++ b/drivers/net/usb/asix.h
@@ -192,8 +192,8 @@ extern const struct driver_info ax88172a_info;
/* ASIX specific flags */
#define FLAG_EEPROM_MAC (1UL << 0) /* init device MAC from eeprom */
-int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
- u16 size, void *data, int in_pm);
+int __must_check asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+ u16 size, void *data, int in_pm);
int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
u16 size, void *data, int in_pm);
diff --git a/drivers/net/usb/asix_common.c b/drivers/net/usb/asix_common.c
index 71682970be58..524805285019 100644
--- a/drivers/net/usb/asix_common.c
+++ b/drivers/net/usb/asix_common.c
@@ -11,8 +11,8 @@
#define AX_HOST_EN_RETRIES 30
-int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
- u16 size, void *data, int in_pm)
+int __must_check asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+ u16 size, void *data, int in_pm)
{
int ret;
int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16);
@@ -27,9 +27,12 @@ int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
ret = fn(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
value, index, data, size);
- if (unlikely(ret < 0))
+ if (unlikely(ret < size)) {
+ ret = ret < 0 ? ret : -ENODATA;
+
netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n",
index, ret);
+ }
return ret;
}
@@ -79,7 +82,7 @@ static int asix_check_host_enable(struct usbnet *dev, int in_pm)
0, 0, 1, &smsr, in_pm);
if (ret == -ENODEV)
break;
- else if (ret < sizeof(smsr))
+ else if (ret < 0)
continue;
else if (smsr & AX_HOST_EN)
break;
@@ -579,8 +582,12 @@ int asix_mdio_read_nopm(struct net_device *netdev, int phy_id, int loc)
return ret;
}
- asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
- (__u16)loc, 2, &res, 1);
+ ret = asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
+ (__u16)loc, 2, &res, 1);
+ if (ret < 0) {
+ mutex_unlock(&dev->phy_mutex);
+ return ret;
+ }
asix_set_hw_mii(dev, 1);
mutex_unlock(&dev->phy_mutex);
diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index 4514d35ef4c4..6b2fbdf4e0fd 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -755,7 +755,12 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
priv->phy_addr = ret;
priv->embd_phy = ((priv->phy_addr & 0x1f) == 0x10);
- asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &chipcode, 0);
+ ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &chipcode, 0);
+ if (ret < 0) {
+ netdev_dbg(dev->net, "Failed to read STATMNGSTS_REG: %d\n", ret);
+ return ret;
+ }
+
chipcode &= AX_CHIPCODE_MASK;
ret = (chipcode == AX_AX88772_CHIPCODE) ? ax88772_hw_reset(dev, 0) :
@@ -920,11 +925,21 @@ static int ax88178_reset(struct usbnet *dev)
int gpio0 = 0;
u32 phyid;
- asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status, 0);
+ ret = asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status, 0);
+ if (ret < 0) {
+ netdev_dbg(dev->net, "Failed to read GPIOS: %d\n", ret);
+ return ret;
+ }
+
netdev_dbg(dev->net, "GPIO Status: 0x%04x\n", status);
asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0, 0, 0, NULL, 0);
- asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom, 0);
+ ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom, 0);
+ if (ret < 0) {
+ netdev_dbg(dev->net, "Failed to read EEPROM: %d\n", ret);
+ return ret;
+ }
+
asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0, 0, 0, NULL, 0);
netdev_dbg(dev->net, "EEPROM index 0x17 is 0x%04x\n", eeprom);
--
2.34.1
Powered by blists - more mailing lists