netdev - [PATCH v2 0/5] can: rcar_canfd: Add support for V3U flavor

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220111162231.10390-1-uli+renesas@fpond.eu>
Date:   Tue, 11 Jan 2022 17:22:26 +0100
From:   Ulrich Hecht <uli+renesas@...nd.eu>
To:     linux-renesas-soc@...r.kernel.org
Cc:     netdev@...r.kernel.org, davem@...emloft.net,
        linux-can@...r.kernel.org, prabhakar.mahadev-lad.rj@...renesas.com,
        biju.das.jz@...renesas.com, wsa@...nel.org,
        yoshihiro.shimoda.uh@...esas.com, wg@...ndegger.com,
        mkl@...gutronix.de, kuba@...nel.org, mailhol.vincent@...adoo.fr,
        socketcan@...tkopp.net, geert@...ux-m68k.org,
        kieran.bingham@...asonboard.com,
        Ulrich Hecht <uli+renesas@...nd.eu>
Subject: [PATCH v2 0/5] can: rcar_canfd: Add support for V3U flavor

Hi!

This adds CANFD support for V3U (R8A779A0) SoCs. The V3U's IP supports up to
eight channels and has some other minor differences to the Gen3 variety:

- changes to some register offsets and layouts
- absence of "classic CAN" registers, both modes are handled through the
  CANFD register set

This patch set tries to accommodate these changes in a minimally intrusive
way.

This revision attempts to address issues raised by reviewers to the extent
possible, adds board enablement, a missing clock and some minor fixes. See
below for details.

It has been sucessfully tested remotely on a V3U Falcon board, but only with
channels 0 and 1. We were not able to get higher channels to work in both
directions yet. It is not currently clear if this is an issue with the
driver, the board or the silicon, but the BSP vendor driver only works with
channels 0 and 1 as well, so my bet is on one of the latter. For this
reason, this series only enables known-working channels 0 and 1 on Falcon.

CU
Uli

Changes since v1:
- clk: added missing CANFD module clock
- driver: fixed tests for RZ/G2L so they won't break V3U
- driver: simplified two macros
- DT: enabled devices 0 and 1 on Falcon board
- DT: changed assigned-clock-rates to 80000000
- DT: added interrupt names

Ulrich Hecht (5):
  clk: renesas: r8a779a0: add CANFD module clock
  can: rcar_canfd: Add support for r8a779a0 SoC
  arm64: dts: renesas: r8a779a0: Add CANFD device node
  arm64: dts: renesas: r8a779a0-falcon: enable CANFD 0 and 1
  dt-bindings: can: renesas,rcar-canfd: Document r8a779a0 support

 .../bindings/net/can/renesas,rcar-canfd.yaml  |   2 +
 .../boot/dts/renesas/r8a779a0-falcon.dts      |  24 ++
 arch/arm64/boot/dts/renesas/r8a779a0.dtsi     |  56 +++++
 drivers/clk/renesas/r8a779a0-cpg-mssr.c       |   1 +
 drivers/net/can/rcar/rcar_canfd.c             | 231 ++++++++++++------
 5 files changed, 236 insertions(+), 78 deletions(-)

-- 
2.20.1