| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1642006975-17580-1-git-send-email-sbhatta@marvell.com>
Date: Wed, 12 Jan 2022 22:32:55 +0530
From: Subbaraya Sundeep <sbhatta@...vell.com>
To: <davem@...emloft.net>, <kuba@...nel.org>, <netdev@...r.kernel.org>
CC: <hkelam@...vell.com>, <gakula@...vell.com>, <sgoutham@...vell.com>,
Subbaraya Sundeep <sbhatta@...vell.com>
Subject: [net-next PATCH] octeontx2-pf: Change receive buffer size using ethtool
ethtool rx-buf-len is for setting receive buffer size,
support setting it via ethtool -G parameter and getting
it via ethtool -g parameter.
Signed-off-by: Subbaraya Sundeep <sbhatta@...vell.com>
Signed-off-by: Sunil Goutham <sgoutham@...vell.com>
---
Hi,
This patch is reworked to use ethtool instead
of devlink paramter. Initial patch with devlink
was rejected and Jakub suggested to use ethtool
which was already work in progress by Huawei at
that moment.
https://lore.kernel.org/all/1633454136-14679-1-git-send-email-sbhatta@marvell.com/t/#me83fcb2ce41a2c054370b1ec75172c2f839f57e2
Thanks,
Sundeep
.../net/ethernet/marvell/octeontx2/nic/otx2_common.c | 7 +++++++
.../net/ethernet/marvell/octeontx2/nic/otx2_common.h | 1 +
.../net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c | 18 +++++++++++++++++-
drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c | 5 +++++
drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c | 3 +++
5 files changed, 33 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c
index 66da31f..92c0ddb 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c
@@ -222,8 +222,11 @@ EXPORT_SYMBOL(otx2_set_mac_address);
int otx2_hw_set_mtu(struct otx2_nic *pfvf, int mtu)
{
struct nix_frs_cfg *req;
+ u16 maxlen;
int err;
+ maxlen = otx2_get_max_mtu(pfvf) + OTX2_ETH_HLEN + OTX2_HW_TIMESTAMP_LEN;
+
mutex_lock(&pfvf->mbox.lock);
req = otx2_mbox_alloc_msg_nix_set_hw_frs(&pfvf->mbox);
if (!req) {
@@ -233,6 +236,10 @@ int otx2_hw_set_mtu(struct otx2_nic *pfvf, int mtu)
req->maxlen = pfvf->netdev->mtu + OTX2_ETH_HLEN + OTX2_HW_TIMESTAMP_LEN;
+ /* Use max receive length supported by hardware for loopback devices */
+ if (is_otx2_lbkvf(pfvf->pdev))
+ req->maxlen = maxlen;
+
err = otx2_sync_mbox_msg(&pfvf->mbox);
mutex_unlock(&pfvf->mbox.lock);
return err;
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
index 61e5281..6d11cb2 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
@@ -177,6 +177,7 @@ struct otx2_hw {
u16 pool_cnt;
u16 rqpool_cnt;
u16 sqpool_cnt;
+ u16 rbuf_len;
/* NPA */
u32 stack_pg_ptrs; /* No of ptrs per stack page */
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
index d85db90..a100296 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
@@ -371,6 +371,7 @@ static void otx2_get_ringparam(struct net_device *netdev,
ring->rx_pending = qs->rqe_cnt ? qs->rqe_cnt : Q_COUNT(Q_SIZE_256);
ring->tx_max_pending = Q_COUNT(Q_SIZE_MAX);
ring->tx_pending = qs->sqe_cnt ? qs->sqe_cnt : Q_COUNT(Q_SIZE_4K);
+ kernel_ring->rx_buf_len = pfvf->hw.rbuf_len;
}
static int otx2_set_ringparam(struct net_device *netdev,
@@ -379,6 +380,7 @@ static int otx2_set_ringparam(struct net_device *netdev,
struct netlink_ext_ack *extack)
{
struct otx2_nic *pfvf = netdev_priv(netdev);
+ u32 rx_buf_len = kernel_ring->rx_buf_len;
bool if_up = netif_running(netdev);
struct otx2_qset *qs = &pfvf->qset;
u32 rx_count, tx_count;
@@ -386,6 +388,15 @@ static int otx2_set_ringparam(struct net_device *netdev,
if (ring->rx_mini_pending || ring->rx_jumbo_pending)
return -EINVAL;
+ /* Hardware supports max size of 32k for a receive buffer
+ * and 1536 is typical ethernet frame size.
+ */
+ if (rx_buf_len && (rx_buf_len < 1536 || rx_buf_len > 32768)) {
+ netdev_err(netdev,
+ "Receive buffer range is 1536 - 32768");
+ return -EINVAL;
+ }
+
/* Permitted lengths are 16 64 256 1K 4K 16K 64K 256K 1M */
rx_count = ring->rx_pending;
/* On some silicon variants a skid or reserved CQEs are
@@ -403,7 +414,7 @@ static int otx2_set_ringparam(struct net_device *netdev,
Q_COUNT(Q_SIZE_4K), Q_COUNT(Q_SIZE_MAX));
tx_count = Q_COUNT(Q_SIZE(tx_count, 3));
- if (tx_count == qs->sqe_cnt && rx_count == qs->rqe_cnt)
+ if (tx_count == qs->sqe_cnt && rx_count == qs->rqe_cnt && !rx_buf_len)
return 0;
if (if_up)
@@ -413,6 +424,10 @@ static int otx2_set_ringparam(struct net_device *netdev,
qs->sqe_cnt = tx_count;
qs->rqe_cnt = rx_count;
+ if (rx_buf_len)
+ pfvf->hw.rbuf_len = ALIGN(rx_buf_len, OTX2_ALIGN) +
+ OTX2_HEAD_ROOM;
+
if (if_up)
return netdev->netdev_ops->ndo_open(netdev);
@@ -1207,6 +1222,7 @@ static int otx2_set_link_ksettings(struct net_device *netdev,
static const struct ethtool_ops otx2_ethtool_ops = {
.supported_coalesce_params = ETHTOOL_COALESCE_USECS |
ETHTOOL_COALESCE_MAX_FRAMES,
+ .supported_ring_params = ETHTOOL_RING_USE_RX_BUF_LEN,
.get_link = otx2_get_link,
.get_drvinfo = otx2_get_drvinfo,
.get_strings = otx2_get_strings,
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
index 6080ebd..37afffa 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
@@ -66,6 +66,8 @@ static int otx2_change_mtu(struct net_device *netdev, int new_mtu)
netdev->mtu, new_mtu);
netdev->mtu = new_mtu;
+ pf->hw.rbuf_len = 0;
+
if (if_up)
err = otx2_open(netdev);
@@ -1306,6 +1308,9 @@ static int otx2_get_rbuf_size(struct otx2_nic *pf, int mtu)
int total_size;
int rbuf_size;
+ if (pf->hw.rbuf_len)
+ return pf->hw.rbuf_len;
+
/* The data transferred by NIX to memory consists of actual packet
* plus additional data which has timestamp and/or EDSA/HIGIG2
* headers if interface is configured in corresponding modes.
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c
index 925b74e..3fe4c0a 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c
@@ -438,6 +438,7 @@ static void otx2vf_do_set_rx_mode(struct work_struct *work)
static int otx2vf_change_mtu(struct net_device *netdev, int new_mtu)
{
+ struct otx2_nic *vf = netdev_priv(netdev);
bool if_up = netif_running(netdev);
int err = 0;
@@ -448,6 +449,8 @@ static int otx2vf_change_mtu(struct net_device *netdev, int new_mtu)
netdev->mtu, new_mtu);
netdev->mtu = new_mtu;
+ vf->hw.rbuf_len = 0;
+
if (if_up)
err = otx2vf_open(netdev);
--
2.7.4
Powered by blists - more mailing lists