lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220113085524.1110708-32-Jerome.Pouiller@silabs.com>
Date:   Thu, 13 Jan 2022 09:55:24 +0100
From:   Jerome Pouiller <Jerome.Pouiller@...abs.com>
To:     devel@...verdev.osuosl.org, linux-wireless@...r.kernel.org
Cc:     netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Kalle Valo <kvalo@...eaurora.org>,
        "David S . Miller" <davem@...emloft.net>,
        Jérôme Pouiller 
        <jerome.pouiller@...abs.com>
Subject: [PATCH 31/31] staging: wfx: do not probe the device if not in the DT

From: Jérôme Pouiller <jerome.pouiller@...abs.com>

Since the WF200 VID/PID are not reliable, it's recommended to declare it
in the DT. Until now, if the device was not declared, the driver just
printed a warning and continue. But, the risk of a collision is too
high, the driver now returns an error.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@...abs.com>
---
 drivers/staging/wfx/Kconfig    |  4 ++++
 drivers/staging/wfx/bus_sdio.c | 21 ++++++---------------
 2 files changed, 10 insertions(+), 15 deletions(-)

diff --git a/drivers/staging/wfx/Kconfig b/drivers/staging/wfx/Kconfig
index 01ea09cb9697..835a855409d8 100644
--- a/drivers/staging/wfx/Kconfig
+++ b/drivers/staging/wfx/Kconfig
@@ -7,3 +7,7 @@ config WFX
 	help
 	  This is a driver for Silicons Labs WFxxx series (WF200 and further)
 	  chipsets. This chip can be found on SPI or SDIO buses.
+
+	  Silabs does not use a reliable SDIO vendor ID. So, to avoid conflicts,
+	  the driver won't probe the device if it is not also declared in the
+	  Device Tree.
diff --git a/drivers/staging/wfx/bus_sdio.c b/drivers/staging/wfx/bus_sdio.c
index 6ea573221ab1..bc3df85a05b6 100644
--- a/drivers/staging/wfx/bus_sdio.c
+++ b/drivers/staging/wfx/bus_sdio.c
@@ -204,24 +204,17 @@ static int wfx_sdio_probe(struct sdio_func *func, const struct sdio_device_id *i
 		return -ENODEV;
 	}
 
+	if (!pdata) {
+		dev_warn(&func->dev, "no compatible device found in DT\n");
+		return -ENODEV;
+	}
+
 	bus = devm_kzalloc(&func->dev, sizeof(*bus), GFP_KERNEL);
 	if (!bus)
 		return -ENOMEM;
 
-	if (np) {
-		if (!of_match_node(wfx_sdio_of_match, np)) {
-			dev_warn(&func->dev, "no compatible device found in DT\n");
-			return -ENODEV;
-		}
-		bus->of_irq = irq_of_parse_and_map(np, 0);
-	} else {
-		dev_warn(&func->dev,
-			 "device is not declared in DT, features will be limited\n");
-		/* FIXME: ignore VID/PID and only rely on device tree */
-		// return -ENODEV;
-	}
-
 	bus->func = func;
+	bus->of_irq = irq_of_parse_and_map(np, 0);
 	sdio_set_drvdata(func, bus);
 	func->card->quirks |= MMC_QUIRK_LENIENT_FN0 |
 			      MMC_QUIRK_BLKSZ_FOR_BYTE_MODE |
@@ -268,8 +261,6 @@ static void wfx_sdio_remove(struct sdio_func *func)
 #define SDIO_DEVICE_ID_SILABS_WF200  0x1000
 static const struct sdio_device_id wfx_sdio_ids[] = {
 	{ SDIO_DEVICE(SDIO_VENDOR_ID_SILABS, SDIO_DEVICE_ID_SILABS_WF200) },
-	/* FIXME: ignore VID/PID and only rely on device tree */
-	// { SDIO_DEVICE(SDIO_ANY_ID, SDIO_ANY_ID) },
 	{ },
 };
 MODULE_DEVICE_TABLE(sdio, wfx_sdio_ids);
-- 
2.34.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ