[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220118021940.1942199-24-sashal@kernel.org>
Date: Mon, 17 Jan 2022 21:16:27 -0500
From: Sasha Levin <sashal@...nel.org>
To: linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc: Wen Gong <wgong@...eaurora.org>, Kalle Valo <kvalo@...eaurora.org>,
Sasha Levin <sashal@...nel.org>, kvalo@...nel.org,
davem@...emloft.net, kuba@...nel.org, ath11k@...ts.infradead.org,
linux-wireless@...r.kernel.org, netdev@...r.kernel.org
Subject: [PATCH AUTOSEL 5.16 024/217] ath11k: enable IEEE80211_VHT_EXT_NSS_BW_CAPABLE if NSS ratio enabled
From: Wen Gong <wgong@...eaurora.org>
[ Upstream commit 78406044bdd0cc8987bc082b76867c63ab1c6af8 ]
When NSS ratio enabled reported by firmware, SUPPORTS_VHT_EXT_NSS_BW
is set in ath11k, meanwhile IEEE80211_VHT_EXT_NSS_BW_CAPABLE also
need to be set, otherwise it is invalid because spec in IEEE Std
802.11™‐2020 as below.
Table 9-273-Supported VHT-MCS and NSS Set subfields, it has subfield
VHT Extended NSS BW Capable, its definition is:
Indicates whether the STA is capable of interpreting the Extended NSS
BW Support subfield of the VHT Capabilities Information field.
dmesg have a message without this patch:
ieee80211 phy0: copying sband (band 1) due to VHT EXT NSS BW flag
It means mac80211 will set IEEE80211_VHT_EXT_NSS_BW_CAPABLE if ath11k not
set it in ieee80211_register_hw(). So it is better to set it in ath11k.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Signed-off-by: Wen Gong <wgong@...eaurora.org>
Signed-off-by: Kalle Valo <kvalo@...eaurora.org>
Link: https://lore.kernel.org/r/20211013073704.15888-1-wgong@codeaurora.org
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/net/wireless/ath/ath11k/mac.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 1cc55602787bb..0a196fb3df9fd 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -4561,6 +4561,10 @@ ath11k_create_vht_cap(struct ath11k *ar, u32 rate_cap_tx_chainmask,
vht_cap.vht_supported = 1;
vht_cap.cap = ar->pdev->cap.vht_cap;
+ if (ar->pdev->cap.nss_ratio_enabled)
+ vht_cap.vht_mcs.tx_highest |=
+ cpu_to_le16(IEEE80211_VHT_EXT_NSS_BW_CAPABLE);
+
ath11k_set_vht_txbf_cap(ar, &vht_cap.cap);
rxmcs_map = 0;
--
2.34.1
Powered by blists - more mailing lists