[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220120070226.1492-6-biao.huang@mediatek.com>
Date: Thu, 20 Jan 2022 15:02:22 +0800
From: Biao Huang <biao.huang@...iatek.com>
To: David Miller <davem@...emloft.net>,
Rob Herring <robh+dt@...nel.org>,
Bartosz Golaszewski <brgl@...ev.pl>,
Fabien Parent <fparent@...libre.com>
CC: Jakub Kicinski <kuba@...nel.org>, Felix Fietkau <nbd@....name>,
"John Crispin" <john@...ozen.org>,
Sean Wang <sean.wang@...iatek.com>,
Mark Lee <Mark-MC.Lee@...iatek.com>,
Matthias Brugger <matthias.bgg@...il.com>,
<netdev@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-mediatek@...ts.infradead.org>,
Biao Huang <biao.huang@...iatek.com>,
Yinghua Pan <ot_yinghua.pan@...iatek.com>,
<srv_heupstream@...iatek.com>,
Macpaul Lin <macpaul.lin@...iatek.com>
Subject: [PATCH net-next v1 5/9] net: ethernet: mtk-star-emac: add clock pad selection for RMII
This patch add a new dts property named "mediatek,rmii-rxc" parsing
in driver, which will configure MAC to select which pin the RMII reference
clock is connected to, TXC or RXC.
TXC pad is the default reference clock pin. If user wants to use RXC pad
instead, add "mediatek,rmii-rxc" to corresponding device node.
Signed-off-by: Biao Huang <biao.huang@...iatek.com>
Signed-off-by: Yinghua Pan <ot_yinghua.pan@...iatek.com>
---
drivers/net/ethernet/mediatek/mtk_star_emac.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/mediatek/mtk_star_emac.c b/drivers/net/ethernet/mediatek/mtk_star_emac.c
index 403439782db9..ab2fe72fdd6a 100644
--- a/drivers/net/ethernet/mediatek/mtk_star_emac.c
+++ b/drivers/net/ethernet/mediatek/mtk_star_emac.c
@@ -189,6 +189,8 @@ static const char *const mtk_star_clk_names[] = { "core", "reg", "trans" };
#define MTK_PERICFG_REG_NIC_CFG_CON_V2 0x0c10
#define MTK_PERICFG_REG_NIC_CFG_CON_CFG_INTF GENMASK(3, 0)
#define MTK_PERICFG_BIT_NIC_CFG_CON_RMII 1
+#define MTK_PERICFG_BIT_NIC_CFG_CON_CLK BIT(0)
+#define MTK_PERICFG_BIT_NIC_CFG_CON_CLK_V2 BIT(8)
/* Represents the actual structure of descriptors used by the MAC. We can
* reuse the same structure for both TX and RX - the layout is the same, only
@@ -265,6 +267,7 @@ struct mtk_star_priv {
int speed;
int duplex;
int pause;
+ bool rmii_rxc;
const struct mtk_star_compat *compat_data;
@@ -1528,6 +1531,8 @@ static int mtk_star_probe(struct platform_device *pdev)
return -ENODEV;
}
+ priv->rmii_rxc = of_property_read_bool(of_node, "mediatek,rmii-rxc");
+
if (priv->compat_data->set_interface_mode) {
ret = priv->compat_data->set_interface_mode(ndev);
if (ret) {
@@ -1571,17 +1576,21 @@ static int mt8516_set_interface_mode(struct net_device *ndev)
{
struct mtk_star_priv *priv = netdev_priv(ndev);
struct device *dev = mtk_star_get_dev(priv);
- unsigned int intf_val = 0;
+ unsigned int intf_val = 0, rmii_rxc = 0;
switch (priv->phy_intf) {
case PHY_INTERFACE_MODE_RMII:
intf_val = MTK_PERICFG_BIT_NIC_CFG_CON_RMII;
+ rmii_rxc = priv->rmii_rxc ? 0 : MTK_PERICFG_BIT_NIC_CFG_CON_CLK;
break;
default:
dev_err(dev, "This interface not supported\n");
return -EINVAL;
}
+ regmap_update_bits(priv->pericfg, MTK_PERICFG_REG_NIC_CFG1_CON,
+ MTK_PERICFG_BIT_NIC_CFG_CON_CLK,
+ rmii_rxc);
regmap_update_bits(priv->pericfg, MTK_PERICFG_REG_NIC_CFG0_CON,
MTK_PERICFG_REG_NIC_CFG_CON_CFG_INTF,
intf_val);
@@ -1597,6 +1606,7 @@ static int mt8365_set_interface_mode(struct net_device *ndev)
switch (priv->phy_intf) {
case PHY_INTERFACE_MODE_RMII:
intf_val = MTK_PERICFG_BIT_NIC_CFG_CON_RMII;
+ intf_val |= priv->rmii_rxc ? 0 : MTK_PERICFG_BIT_NIC_CFG_CON_CLK_V2;
break;
default:
dev_err(dev, "This interface not supported\n");
@@ -1604,7 +1614,8 @@ static int mt8365_set_interface_mode(struct net_device *ndev)
}
regmap_update_bits(priv->pericfg, MTK_PERICFG_REG_NIC_CFG_CON_V2,
- MTK_PERICFG_REG_NIC_CFG_CON_CFG_INTF,
+ MTK_PERICFG_REG_NIC_CFG_CON_CFG_INTF |
+ MTK_PERICFG_BIT_NIC_CFG_CON_CLK_V2,
intf_val);
return 0;
}
--
2.25.1
Powered by blists - more mailing lists