netdev - [net PATCH 7/9] octeontx2-af: cn10k: Do not enable RPM loopback for LPC interfaces

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1642746887-30924-8-git-send-email-sbhatta@marvell.com>
Date:   Fri, 21 Jan 2022 12:04:45 +0530
From:   Subbaraya Sundeep <sbhatta@...vell.com>
To:     <davem@...emloft.net>, <kuba@...nel.org>, <netdev@...r.kernel.org>,
        <sundeep.lkml@...il.com>
CC:     <hkelam@...vell.com>, <gakula@...vell.com>, <sgoutham@...vell.com>,
        Subbaraya Sundeep <sbhatta@...vell.com>
Subject: [net PATCH 7/9] octeontx2-af: cn10k: Do not enable RPM loopback for LPC interfaces

From: Geetha sowjanya <gakula@...vell.com>

Internal looback is not supported to low rate LPCS interface like
SGMII/QSGMII. Hence don't allow to enable for such interfaces.

Fixes: 3ad3f8f93c81 ("octeontx2-af: cn10k: MAC internal loopback support")
Signed-off-by: Geetha sowjanya <gakula@...vell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@...vell.com>
Signed-off-by: Sunil Goutham <sgoutham@...vell.com>
---
 drivers/net/ethernet/marvell/octeontx2/af/rpm.c | 27 +++++++++++--------------
 1 file changed, 12 insertions(+), 15 deletions(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rpm.c b/drivers/net/ethernet/marvell/octeontx2/af/rpm.c
index 4cbd915..9ea2f6a 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rpm.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rpm.c
@@ -291,23 +291,20 @@ int rpm_lmac_internal_loopback(void *rpmd, int lmac_id, bool enable)
 	if (!rpm || lmac_id >= rpm->lmac_count)
 		return -ENODEV;
 	lmac_type = rpm->mac_ops->get_lmac_type(rpm, lmac_id);
-	if (lmac_type == LMAC_MODE_100G_R) {
-		cfg = rpm_read(rpm, lmac_id, RPMX_MTI_PCS100X_CONTROL1);
-
-		if (enable)
-			cfg |= RPMX_MTI_PCS_LBK;
-		else
-			cfg &= ~RPMX_MTI_PCS_LBK;
-		rpm_write(rpm, lmac_id, RPMX_MTI_PCS100X_CONTROL1, cfg);
-	} else {
-		cfg = rpm_read(rpm, lmac_id, RPMX_MTI_LPCSX_CONTROL1);
-		if (enable)
-			cfg |= RPMX_MTI_PCS_LBK;
-		else
-			cfg &= ~RPMX_MTI_PCS_LBK;
-		rpm_write(rpm, lmac_id, RPMX_MTI_LPCSX_CONTROL1, cfg);
+
+	if (lmac_type == LMAC_MODE_QSGMII || lmac_type == LMAC_MODE_SGMII) {
+		dev_err(&rpm->pdev->dev, "loopback not supported for LPC mode\n");
+		return 0;
 	}
 
+	cfg = rpm_read(rpm, lmac_id, RPMX_MTI_PCS100X_CONTROL1);
+
+	if (enable)
+		cfg |= RPMX_MTI_PCS_LBK;
+	else
+		cfg &= ~RPMX_MTI_PCS_LBK;
+	rpm_write(rpm, lmac_id, RPMX_MTI_PCS100X_CONTROL1, cfg);
+
 	return 0;
 }
 
-- 
2.7.4