[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <fb358da0-d255-301d-c39c-8232aa415a38@nvidia.com>
Date: Fri, 21 Jan 2022 10:52:20 +0200
From: Nikolay Aleksandrov <nikolay@...dia.com>
To: Sun Shouxin <sunshouxin@...natelecom.cn>, <j.vosburgh@...il.com>,
<vfalico@...il.com>, <andy@...yhouse.net>, <davem@...emloft.net>,
<kuba@...nel.org>
CC: <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<jay.vosburgh@...onical.com>, <huyd12@...natelecom.cn>
Subject: Re: [PATCH v7] net: bonding: Add support for IPV6 ns/na to
balance-alb/balance-tlb mode
On 21/01/2022 10:22, Sun Shouxin wrote:
> Since ipv6 neighbor solicitation and advertisement messages
> isn't handled gracefully in bond6 driver, we can see packet
> drop due to inconsistency between mac address in the option
> message and source MAC .
>
> Another examples is ipv6 neighbor solicitation and advertisement
> messages from VM via tap attached to host bridge, the src mac
> might be changed through balance-alb mode, but it is not synced
> with Link-layer address in the option message.
>
> The patch implements bond6's tx handle for ipv6 neighbor
> solicitation and advertisement messages.
>
> Suggested-by: Hu Yadi <huyd12@...natelecom.cn>
> Acked-by: Jay Vosburgh <jay.vosburgh@...onical.com>
> Signed-off-by: Sun Shouxin <sunshouxin@...natelecom.cn>
> ---
> drivers/net/bonding/bond_alb.c | 36 ++++++++++++++++++++++++++++++++++
> 1 file changed, 36 insertions(+)
>
Hi,
A few comments below,
> diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
> index 533e476988f2..82b7071840b1 100644
> --- a/drivers/net/bonding/bond_alb.c
> +++ b/drivers/net/bonding/bond_alb.c
> @@ -1269,6 +1269,34 @@ static int alb_set_mac_address(struct bonding *bond, void *addr)
> return res;
> }
>
> +/*determine if the packet is NA or NS*
comments should have spaces, /* text */
> +static bool __alb_determine_nd(struct icmp6hdr *hdr)
> +{
> + if (hdr->icmp6_type == NDISC_NEIGHBOUR_ADVERTISEMENT ||
> + hdr->icmp6_type == NDISC_NEIGHBOUR_SOLICITATION) {
> + return true;
> + }
> +
> + return false;
> +}
> +
> +static bool alb_determine_nd(struct sk_buff *skb, struct bonding *bond)
> +{
> + struct ipv6hdr *ip6hdr;
> + struct icmp6hdr *hdr;
> +
> + if (skb->protocol == htons(ETH_P_IPV6)) {
You can drop this test if you re-arrange the cases in the caller. More below.
> + ip6hdr = ipv6_hdr(skb);
> + if (ip6hdr->nexthdr == IPPROTO_ICMPV6) {
> + hdr = icmp6_hdr(skb);
You have to use pskb_may_pull here, only the IPv6 header is pulled by the caller
and certain to be in the linear part. Also you have to change one of the callers,
more below.
> + if (__alb_determine_nd(hdr))
> + return true;
you can do directly return __alb_determine_nd(hdr) here.
> + }
> + }
> +
> + return false;
> +}
> +
> /************************ exported alb functions ************************/
>
> int bond_alb_initialize(struct bonding *bond, int rlb_enabled)
> @@ -1350,6 +1378,9 @@ struct slave *bond_xmit_tlb_slave_get(struct bonding *bond,> switch (skb->protocol) {
> case htons(ETH_P_IP):
> case htons(ETH_P_IPV6):
> + if (alb_determine_nd(skb, bond))
> + break;
> +
You can drop the IPv6 test in alb_determine_nd() if you re-arrange the cases here.
Something like:
case htons(ETH_P_IPV6):
if (alb_determine_nd(skb, bond))
break;
fallthrough;
case htons(ETH_P_IP):
You should also use pskb_may_pull to make sure the IPv6 header is in the linear part
and can be accessed.
> hash_index = bond_xmit_hash(bond, skb);
> if (bond->params.tlb_dynamic_lb) {
> tx_slave = tlb_choose_channel(bond,
> @@ -1446,6 +1477,11 @@ struct slave *bond_xmit_alb_slave_get(struct bonding *bond,
> break;
> }
>
> + if (alb_determine_nd(skb, bond)) {
> + do_tx_balance = false;
> + break;
> + }
> +
> hash_start = (char *)&ip6hdr->daddr;
> hash_size = sizeof(ip6hdr->daddr);
> break;
>
> base-commit: 79e06c4c4950be2abd8ca5d2428a8c915aa62c24
Thanks,
Nik
Powered by blists - more mailing lists