| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CA+NMeC_BK65Oej=tL0ooyBhhEk6wK73HOaV5LR3QQkzXpbzNgQ@mail.gmail.com>
Date: Tue, 25 Jan 2022 12:22:42 -0300
From: Victor Nogueira <victor@...atatu.com>
To: Baowen Zheng <baowen.zheng@...igine.com>
Cc: David Ahern <dsahern@...il.com>, netdev@...r.kernel.org,
oss-drivers@...igine.com, Jamal Hadi Salim <jhs@...atatu.com>,
Simon Horman <simon.horman@...igine.com>
Subject: Re: [PATCH iproute2-next v1] tc: add skip_hw and skip_sw to control
action offload
Hi Baowen,
I applied your patch, ran tdc.sh and in particular the vlan tests broke.
cheers,
Victor
On Tue, Jan 25, 2022 at 7:35 AM Baowen Zheng <baowen.zheng@...igine.com> wrote:
>
> Add skip_hw and skip_sw flags for user to control whether
> offload action to hardware.
>
> Also we add hw_count to show how many hardwares accept to offload
> the action.
>
> Change man page to describe the usage of skip_sw and skip_hw flag.
>
> An example to add and query action as below.
>
> $ tc actions add action police rate 1mbit burst 100k index 100 skip_sw
>
> $ tc -s -d actions list action police
> total acts 1
> action order 0: police 0x64 rate 1Mbit burst 100Kb mtu 2Kb action reclassify overhead 0b linklayer ethernet
> ref 1 bind 0 installed 2 sec used 2 sec
> Action statistics:
> Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
> backlog 0b 0p requeues 0
> skip_sw in_hw in_hw_count 1
> used_hw_stats delayed
>
> Signed-off-by: baowen zheng <baowen.zheng@...igine.com>
> Signed-off-by: Simon Horman <simon.horman@...igine.com>
> ---
> man/man8/tc-actions.8 | 24 ++++++++++++++++++++
> tc/m_action.c | 63 +++++++++++++++++++++++++++++++++++++++++++--------
> 2 files changed, 77 insertions(+), 10 deletions(-)
>
> diff --git a/man/man8/tc-actions.8 b/man/man8/tc-actions.8
> index 6f1c201..5c399cd 100644
> --- a/man/man8/tc-actions.8
> +++ b/man/man8/tc-actions.8
> @@ -52,6 +52,8 @@ actions \- independently defined actions in tc
> .I HWSTATSSPEC
> ] [
> .I CONTROL
> +] [
> +.I SKIPSPEC
> ]
>
> .I ACTISPEC
> @@ -99,6 +101,11 @@ Time since last update.
> .IR reclassify " | " pipe " | " drop " | " continue " | " ok
> }
>
> +.I SKIPSPEC
> +:= {
> +.IR skip_sw " | " skip_hw
> +}
> +
> .I TC_OPTIONS
> These are the options that are specific to
> .B tc
> @@ -270,6 +277,23 @@ Return to the calling qdisc for packet processing, and end classification of
> this packet.
> .RE
>
> +.TP
> +.I SKIPSPEC
> +The
> +.I SKIPSPEC
> +indicates how
> +.B tc
> +should proceed when executing the action. Any of the following are valid:
> +.RS
> +.TP
> +.B skip_sw
> +Do not process action by software. If hardware has no offload support for this
> +action, operation will fail.
> +.TP
> +.B skip_hw
> +Do not process action by hardware.
> +.RE
> +
> .SH SEE ALSO
> .BR tc (8),
> .BR tc-bpf (8),
> diff --git a/tc/m_action.c b/tc/m_action.c
> index b16882a..b9fed6f 100644
> --- a/tc/m_action.c
> +++ b/tc/m_action.c
> @@ -51,9 +51,10 @@ static void act_usage(void)
> " FL := ls | list | flush | <ACTNAMESPEC>\n"
> " ACTNAMESPEC := action <ACTNAME>\n"
> " ACTISPEC := <ACTNAMESPEC> <INDEXSPEC>\n"
> - " ACTSPEC := action <ACTDETAIL> [INDEXSPEC] [HWSTATSSPEC]\n"
> + " ACTSPEC := action <ACTDETAIL> [INDEXSPEC] [HWSTATSSPEC] [SKIPSPEC]\n"
> " INDEXSPEC := index <32 bit indexvalue>\n"
> " HWSTATSSPEC := hw_stats [ immediate | delayed | disabled ]\n"
> + " SKIPSPEC := [ skip_sw | skip_hw ]\n"
> " ACTDETAIL := <ACTNAME> <ACTPARAMS>\n"
> " Example ACTNAME is gact, mirred, bpf, etc\n"
> " Each action has its own parameters (ACTPARAMS)\n"
> @@ -210,12 +211,14 @@ int parse_action(int *argc_p, char ***argv_p, int tca_id, struct nlmsghdr *n)
> struct rtattr *tail, *tail2;
> char k[FILTER_NAMESZ];
> int act_ck_len = 0;
> + __u32 flag = 0;
> int ok = 0;
> int eap = 0; /* expect action parameters */
>
> int ret = 0;
> int prio = 0;
> unsigned char act_ck[TC_COOKIE_MAX_SIZE];
> + int skip_loop = 2;
>
> if (argc <= 0)
> return -1;
> @@ -314,13 +317,27 @@ done0:
> }
>
> if (*argv && strcmp(*argv, "no_percpu") == 0) {
> + flag |= TCA_ACT_FLAGS_NO_PERCPU_STATS;
> + NEXT_ARG_FWD();
> + }
> +
> + /* we need to parse twice to fix skip flag out of order */
> + while (skip_loop--) {
> + if (*argv && strcmp(*argv, "skip_sw") == 0) {
> + flag |= TCA_ACT_FLAGS_SKIP_SW;
> + NEXT_ARG_FWD();
> + } else if (*argv && strcmp(*argv, "skip_hw") == 0) {
> + flag |= TCA_ACT_FLAGS_SKIP_HW;
> + NEXT_ARG_FWD();
> + }
> + }
> +
> + if (flag) {
> struct nla_bitfield32 flags =
> - { TCA_ACT_FLAGS_NO_PERCPU_STATS,
> - TCA_ACT_FLAGS_NO_PERCPU_STATS };
> + { flag, flag };
>
> addattr_l(n, MAX_MSG, TCA_ACT_FLAGS, &flags,
> sizeof(struct nla_bitfield32));
> - NEXT_ARG_FWD();
> }
>
> addattr_nest_end(n, tail);
> @@ -396,13 +413,39 @@ static int tc_print_one_action(FILE *f, struct rtattr *arg)
> strsz, b1, sizeof(b1)));
> print_nl();
> }
> - if (tb[TCA_ACT_FLAGS]) {
> - struct nla_bitfield32 *flags = RTA_DATA(tb[TCA_ACT_FLAGS]);
> + if (tb[TCA_ACT_FLAGS] || tb[TCA_ACT_IN_HW_COUNT]) {
> + bool skip_hw = false;
> + if (tb[TCA_ACT_FLAGS]) {
> + struct nla_bitfield32 *flags = RTA_DATA(tb[TCA_ACT_FLAGS]);
> +
> + if (flags->selector & TCA_ACT_FLAGS_NO_PERCPU_STATS)
> + print_bool(PRINT_ANY, "no_percpu", "\tno_percpu",
> + flags->value &
> + TCA_ACT_FLAGS_NO_PERCPU_STATS);
> + if (flags->selector & TCA_ACT_FLAGS_SKIP_HW) {
> + print_bool(PRINT_ANY, "skip_hw", "\tskip_hw",
> + flags->value &
> + TCA_ACT_FLAGS_SKIP_HW);
> + skip_hw = !!(flags->value & TCA_ACT_FLAGS_SKIP_HW);
> + }
> + if (flags->selector & TCA_ACT_FLAGS_SKIP_SW)
> + print_bool(PRINT_ANY, "skip_sw", "\tskip_sw",
> + flags->value &
> + TCA_ACT_FLAGS_SKIP_SW);
> + }
> + if (tb[TCA_ACT_IN_HW_COUNT] && !skip_hw) {
> + __u32 count = rta_getattr_u32(tb[TCA_ACT_IN_HW_COUNT]);
> + if (count) {
> + print_bool(PRINT_ANY, "in_hw", "\tin_hw",
> + true);
> + print_uint(PRINT_ANY, "in_hw_count",
> + " in_hw_count %u", count);
> + } else {
> + print_bool(PRINT_ANY, "not_in_hw",
> + "\tnot_in_hw", true);
> + }
> + }
>
> - if (flags->selector & TCA_ACT_FLAGS_NO_PERCPU_STATS)
> - print_bool(PRINT_ANY, "no_percpu", "\tno_percpu",
> - flags->value &
> - TCA_ACT_FLAGS_NO_PERCPU_STATS);
> print_nl();
> }
> if (tb[TCA_ACT_HW_STATS])
> --
> 1.8.3.1
>
Powered by blists - more mailing lists