netdev - [PATCH net-next v2 1/3] dt-bindings: net: cdns,macb: added generic PHY and reset mappings for ZynqMP

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220125170533.256468-2-robert.hancock@calian.com>
Date:   Tue, 25 Jan 2022 11:05:31 -0600
From:   Robert Hancock <robert.hancock@...ian.com>
To:     netdev@...r.kernel.org
Cc:     davem@...emloft.net, kuba@...nel.org, robh+dt@...nel.org,
        michal.simek@...inx.com, nicolas.ferre@...rochip.com,
        claudiu.beznea@...rochip.com, devicetree@...r.kernel.org,
        Robert Hancock <robert.hancock@...ian.com>
Subject: [PATCH net-next v2 1/3] dt-bindings: net: cdns,macb: added generic PHY and reset mappings for ZynqMP

Updated macb DT binding documentation to reflect the phy-names, phys,
resets, reset-names properties which are now used with ZynqMP GEM
devices, and added a ZynqMP-specific DT example.

Signed-off-by: Robert Hancock <robert.hancock@...ian.com>
---
 .../devicetree/bindings/net/cdns,macb.yaml    | 46 +++++++++++++++++++
 1 file changed, 46 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/cdns,macb.yaml b/Documentation/devicetree/bindings/net/cdns,macb.yaml
index 8dd06db34169..efc759e052c4 100644
--- a/Documentation/devicetree/bindings/net/cdns,macb.yaml
+++ b/Documentation/devicetree/bindings/net/cdns,macb.yaml
@@ -81,6 +81,25 @@ properties:
 
   phy-handle: true
 
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: sgmii-phy
+    description:
+      Required with ZynqMP SoC when in SGMII mode.
+      Should reference PS-GTR generic PHY device for this controller
+      instance. See ZynqMP example.
+
+  resets:
+    maxItems: 1
+    description:
+      Recommended with ZynqMP, specify reset control for this
+      controller instance with zynqmp-reset driver.
+
+  reset-names:
+    maxItems: 1
+
   fixed-link: true
 
   iommus:
@@ -157,3 +176,30 @@ examples:
                     reset-gpios = <&pioE 6 1>;
             };
     };
+
+    gem1: ethernet@...c0000 {
+            compatible = "cdns,zynqmp-gem", "cdns,gem";
+            interrupt-parent = <&gic>;
+            interrupts = <0 59 4>, <0 59 4>;
+            reg = <0x0 0xff0c0000 0x0 0x1000>;
+            clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM1_REF>,
+                     <&zynqmp_clk GEM1_TX>, <&zynqmp_clk GEM1_RX>,
+                     <&zynqmp_clk GEM_TSU>;
+            clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            #stream-id-cells = <1>;
+            iommus = <&smmu 0x875>;
+            power-domains = <&zynqmp_firmware PD_ETH_1>;
+            resets = <&zynqmp_reset ZYNQMP_RESET_GEM1>;
+            reset-names = "gem1_rst";
+            status = "okay";
+            phy-mode = "sgmii";
+            phy-names = "sgmii-phy";
+            phys = <&psgtr 1 PHY_TYPE_SGMII 1 1>;
+            fixed-link {
+                    speed = <1000>;
+                    full-duplex;
+                    pause;
+            };
+    };
-- 
2.31.1