netdev - [PATCH CFT net-next 3/5] net: dsa: ksz8795: convert to phylink_generic

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <E1nD2Xo-005UcR-HG@rmk-PC.armlinux.org.uk>
Date:   Thu, 27 Jan 2022 11:02:24 +0000
From:   "Russell King (Oracle)" <rmk+kernel@...linux.org.uk>
To:     netdev@...r.kernel.org, UNGLinuxDriver@...rochip.com
Cc:     Andrew Lunn <andrew@...n.ch>,
        "David S. Miller" <davem@...emloft.net>,
        Florian Fainelli <f.fainelli@...il.com>,
        George McCollister <george.mccollister@...il.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Vivien Didelot <vivien.didelot@...il.com>,
        Vladimir Oltean <olteanv@...il.com>,
        Woojung Huh <woojung.huh@...rochip.com>
Subject: [PATCH CFT net-next 3/5] net: dsa: ksz8795: convert to
 phylink_generic_validate()

Populate the supported interfaces and MAC capabilities for the
Microchip KSZ8795 DSA switch and remove the old validate implementation
to allow DSA to use phylink_generic_validate() for this switch driver.

Signed-off-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
---
 drivers/net/dsa/microchip/ksz8795.c | 45 ++++++++---------------------
 1 file changed, 12 insertions(+), 33 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index 991b9c6b6ce7..5dc9899bc0a6 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -1461,27 +1461,22 @@ static int ksz8_setup(struct dsa_switch *ds)
 	return 0;
 }
 
-static void ksz8_validate(struct dsa_switch *ds, int port,
-			  unsigned long *supported,
-			  struct phylink_link_state *state)
+static void ksz8_get_caps(struct dsa_switch *ds, int port,
+			  struct phylink_config *config)
 {
-	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
 	struct ksz_device *dev = ds->priv;
 
 	if (port == dev->cpu_port) {
-		if (state->interface != PHY_INTERFACE_MODE_RMII &&
-		    state->interface != PHY_INTERFACE_MODE_MII &&
-		    state->interface != PHY_INTERFACE_MODE_NA)
-			goto unsupported;
+		__set_bit(PHY_INTERFACE_MODE_RMII,
+			  config->supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_MII,
+			  config->supported_interfaces);
 	} else {
-		if (state->interface != PHY_INTERFACE_MODE_INTERNAL &&
-		    state->interface != PHY_INTERFACE_MODE_NA)
-			goto unsupported;
+		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
+			  config->supported_interfaces);
 	}
 
-	/* Allow all the expected bits */
-	phylink_set_port_modes(mask);
-	phylink_set(mask, Autoneg);
+	config->mac_capabilities = MAC_10 | MAC_100;
 
 	/* Silicon Errata Sheet (DS80000830A):
 	 * "Port 1 does not respond to received flow control PAUSE frames"
@@ -1489,27 +1484,11 @@ static void ksz8_validate(struct dsa_switch *ds, int port,
 	 * switches.
 	 */
 	if (!ksz_is_ksz88x3(dev) || port)
-		phylink_set(mask, Pause);
+		config->mac_capabilities |= MAC_SYM_PAUSE;
 
 	/* Asym pause is not supported on KSZ8863 and KSZ8873 */
 	if (!ksz_is_ksz88x3(dev))
-		phylink_set(mask, Asym_Pause);
-
-	/* 10M and 100M are only supported */
-	phylink_set(mask, 10baseT_Half);
-	phylink_set(mask, 10baseT_Full);
-	phylink_set(mask, 100baseT_Half);
-	phylink_set(mask, 100baseT_Full);
-
-	linkmode_and(supported, supported, mask);
-	linkmode_and(state->advertising, state->advertising, mask);
-
-	return;
-
-unsupported:
-	linkmode_zero(supported);
-	dev_err(ds->dev, "Unsupported interface: %s, port: %d\n",
-		phy_modes(state->interface), port);
+		config->mac_capabilities |= MAC_ASYM_PAUSE;
 }
 
 static const struct dsa_switch_ops ksz8_switch_ops = {
@@ -1518,7 +1497,7 @@ static const struct dsa_switch_ops ksz8_switch_ops = {
 	.setup			= ksz8_setup,
 	.phy_read		= ksz_phy_read16,
 	.phy_write		= ksz_phy_write16,
-	.phylink_validate	= ksz8_validate,
+	.phylink_get_caps	= ksz8_get_caps,
 	.phylink_mac_link_down	= ksz_mac_link_down,
 	.port_enable		= ksz_enable_port,
 	.get_strings		= ksz8_get_strings,
-- 
2.30.2