| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220127002711.3632101-3-robert.hancock@calian.com>
Date: Wed, 26 Jan 2022 18:27:10 -0600
From: Robert Hancock <robert.hancock@...ian.com>
To: netdev@...r.kernel.org
Cc: davem@...emloft.net, kuba@...nel.org, robh+dt@...nel.org,
michal.simek@...inx.com, nicolas.ferre@...rochip.com,
claudiu.beznea@...rochip.com, devicetree@...r.kernel.org,
Robert Hancock <robert.hancock@...ian.com>
Subject: [PATCH net-next v3 2/3] net: macb: Added ZynqMP-specific initialization
The GEM controllers on ZynqMP were missing some initialization steps which
are required in some cases when using SGMII mode, which uses the PS-GTR
transceivers managed by the phy-zynqmp driver.
The GEM core appears to need a hardware-level reset in order to work
properly in SGMII mode in cases where the GT reference clock was not
present at initial power-on. This can be done using a reset mapped to
the zynqmp-reset driver in the device tree.
Also, when in SGMII mode, the GEM driver needs to ensure the PHY is
initialized and powered on.
Signed-off-by: Robert Hancock <robert.hancock@...ian.com>
---
drivers/net/ethernet/cadence/macb.h | 5 +++
drivers/net/ethernet/cadence/macb_main.c | 53 +++++++++++++++++++++++-
2 files changed, 56 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
index 9ddbee7de72b..584336b7cdaf 100644
--- a/drivers/net/ethernet/cadence/macb.h
+++ b/drivers/net/ethernet/cadence/macb.h
@@ -12,6 +12,7 @@
#include <linux/ptp_clock_kernel.h>
#include <linux/net_tstamp.h>
#include <linux/interrupt.h>
+#include <linux/phy/phy.h>
#if defined(CONFIG_ARCH_DMA_ADDR_T_64BIT) || defined(CONFIG_MACB_USE_HWSTAMP)
#define MACB_EXT_DESC
@@ -1291,6 +1292,9 @@ struct macb {
u32 wol;
struct macb_ptp_info *ptp_info; /* macb-ptp interface */
+
+ struct phy *sgmii_phy; /* for ZynqMP SGMII mode */
+
#ifdef MACB_EXT_DESC
uint8_t hw_dma_cap;
#endif
@@ -1315,6 +1319,7 @@ struct macb {
struct macb_pm_data pm_data;
const struct macb_usrio_config *usrio;
+
};
#ifdef CONFIG_MACB_USE_HWSTAMP
diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index a363da928e8b..4787196e0980 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -34,7 +34,9 @@
#include <linux/udp.h>
#include <linux/tcp.h>
#include <linux/iopoll.h>
+#include <linux/phy/phy.h>
#include <linux/pm_runtime.h>
+#include <linux/reset.h>
#include "macb.h"
/* This structure is only used for MACB on SiFive FU540 devices */
@@ -2739,6 +2741,10 @@ static int macb_open(struct net_device *dev)
macb_init_hw(bp);
+ err = phy_power_on(bp->sgmii_phy);
+ if (err)
+ goto reset_hw;
+
err = macb_phylink_connect(bp);
if (err)
goto reset_hw;
@@ -2775,6 +2781,8 @@ static int macb_close(struct net_device *dev)
phylink_stop(bp->phylink);
phylink_disconnect_phy(bp->phylink);
+ phy_power_off(bp->sgmii_phy);
+
spin_lock_irqsave(&bp->lock, flags);
macb_reset_hw(bp);
netif_carrier_off(dev);
@@ -4544,13 +4552,50 @@ static const struct macb_config np4_config = {
.usrio = &macb_default_usrio,
};
+static int zynqmp_init(struct platform_device *pdev)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+ struct macb *bp = netdev_priv(dev);
+ int ret;
+
+ if (bp->phy_interface == PHY_INTERFACE_MODE_SGMII) {
+ /* Ensure PS-GTR PHY device used in SGMII mode is ready */
+ bp->sgmii_phy = devm_phy_get(&pdev->dev, "sgmii-phy");
+
+ if (IS_ERR(bp->sgmii_phy)) {
+ ret = PTR_ERR(bp->sgmii_phy);
+ dev_err_probe(&pdev->dev, ret,
+ "failed to get PS-GTR PHY\n");
+ return ret;
+ }
+
+ ret = phy_init(bp->sgmii_phy);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to init PS-GTR PHY: %d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ /* Fully reset GEM controller at hardware level using zynqmp-reset driver,
+ * if mapped in device tree.
+ */
+ ret = device_reset_optional(&pdev->dev);
+ if (ret) {
+ dev_err_probe(&pdev->dev, ret, "failed to reset controller");
+ return ret;
+ }
+
+ return macb_init(pdev);
+}
+
static const struct macb_config zynqmp_config = {
.caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE |
MACB_CAPS_JUMBO |
MACB_CAPS_GEM_HAS_PTP | MACB_CAPS_BD_RD_PREFETCH,
.dma_burst_length = 16,
.clk_init = macb_clk_init,
- .init = macb_init,
+ .init = zynqmp_init,
.jumbo_max_len = 10240,
.usrio = &macb_default_usrio,
};
@@ -4767,7 +4812,7 @@ static int macb_probe(struct platform_device *pdev)
err = macb_mii_init(bp);
if (err)
- goto err_out_free_netdev;
+ goto err_out_phy_exit;
netif_carrier_off(dev);
@@ -4792,6 +4837,9 @@ static int macb_probe(struct platform_device *pdev)
mdiobus_unregister(bp->mii_bus);
mdiobus_free(bp->mii_bus);
+err_out_phy_exit:
+ phy_exit(bp->sgmii_phy);
+
err_out_free_netdev:
free_netdev(dev);
@@ -4813,6 +4861,7 @@ static int macb_remove(struct platform_device *pdev)
if (dev) {
bp = netdev_priv(dev);
+ phy_exit(bp->sgmii_phy);
mdiobus_unregister(bp->mii_bus);
mdiobus_free(bp->mii_bus);
--
2.31.1
Powered by blists - more mailing lists