| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4889c4d5-cff8-5b15-bd50-8014b95b18e8@omp.ru>
Date: Fri, 28 Jan 2022 21:32:40 +0300
From: Sergey Shtylyov <s.shtylyov@....ru>
To: <netdev@...r.kernel.org>, "David S. Miller" <davem@...emloft.net>,
"Jakub Kicinski" <kuba@...nel.org>, Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>
CC: <linux-renesas-soc@...r.kernel.org>
Subject: [PATCH v2] phy: make phy_set_max_speed() *void*
After following the call tree of phy_set_max_speed(), it became clear
that this function never returns anything but 0, so we can change its
result type to *void* and drop the result checks from the three drivers
that actually bothered to do it...
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@....ru>
Reviewed-by: Andrew Lunn <andrew@...n.ch>
---
This patch is against the DaveM's 'net-next.git' repo.
Changes in version 2:
- added Andrew Lunn's tag.
drivers/net/ethernet/renesas/ravb_main.c | 8 +-------
drivers/net/ethernet/renesas/sh_eth.c | 10 ++--------
drivers/net/phy/aquantia_main.c | 4 +---
drivers/net/phy/phy-core.c | 22 ++++++++--------------
include/linux/phy.h | 2 +-
5 files changed, 13 insertions(+), 33 deletions(-)
Index: net-next/drivers/net/ethernet/renesas/ravb_main.c
===================================================================
--- net-next.orig/drivers/net/ethernet/renesas/ravb_main.c
+++ net-next/drivers/net/ethernet/renesas/ravb_main.c
@@ -1432,11 +1432,7 @@ static int ravb_phy_init(struct net_devi
* at this time.
*/
if (soc_device_match(r8a7795es10)) {
- err = phy_set_max_speed(phydev, SPEED_100);
- if (err) {
- netdev_err(ndev, "failed to limit PHY to 100Mbit/s\n");
- goto err_phy_disconnect;
- }
+ phy_set_max_speed(phydev, SPEED_100);
netdev_info(ndev, "limited PHY to 100Mbit/s\n");
}
@@ -1457,8 +1453,6 @@ static int ravb_phy_init(struct net_devi
return 0;
-err_phy_disconnect:
- phy_disconnect(phydev);
err_deregister_fixed_link:
if (of_phy_is_fixed_link(np))
of_phy_deregister_fixed_link(np);
Index: net-next/drivers/net/ethernet/renesas/sh_eth.c
===================================================================
--- net-next.orig/drivers/net/ethernet/renesas/sh_eth.c
+++ net-next/drivers/net/ethernet/renesas/sh_eth.c
@@ -2026,14 +2026,8 @@ static int sh_eth_phy_init(struct net_de
}
/* mask with MAC supported features */
- if (mdp->cd->register_type != SH_ETH_REG_GIGABIT) {
- int err = phy_set_max_speed(phydev, SPEED_100);
- if (err) {
- netdev_err(ndev, "failed to limit PHY to 100 Mbit/s\n");
- phy_disconnect(phydev);
- return err;
- }
- }
+ if (mdp->cd->register_type != SH_ETH_REG_GIGABIT)
+ phy_set_max_speed(phydev, SPEED_100);
phy_attached_info(phydev);
Index: net-next/drivers/net/phy/aquantia_main.c
===================================================================
--- net-next.orig/drivers/net/phy/aquantia_main.c
+++ net-next/drivers/net/phy/aquantia_main.c
@@ -533,9 +533,7 @@ static int aqcs109_config_init(struct ph
* PMA speed ability bits are the same for all members of the family,
* AQCS109 however supports speeds up to 2.5G only.
*/
- ret = phy_set_max_speed(phydev, SPEED_2500);
- if (ret)
- return ret;
+ phy_set_max_speed(phydev, SPEED_2500);
return aqr107_set_downshift(phydev, MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT);
}
Index: net-next/drivers/net/phy/phy-core.c
===================================================================
--- net-next.orig/drivers/net/phy/phy-core.c
+++ net-next/drivers/net/phy/phy-core.c
@@ -243,7 +243,7 @@ size_t phy_speeds(unsigned int *speeds,
return count;
}
-static int __set_linkmode_max_speed(u32 max_speed, unsigned long *addr)
+static void __set_linkmode_max_speed(u32 max_speed, unsigned long *addr)
{
const struct phy_setting *p;
int i;
@@ -254,13 +254,11 @@ static int __set_linkmode_max_speed(u32
else
break;
}
-
- return 0;
}
-static int __set_phy_supported(struct phy_device *phydev, u32 max_speed)
+static void __set_phy_supported(struct phy_device *phydev, u32 max_speed)
{
- return __set_linkmode_max_speed(max_speed, phydev->supported);
+ __set_linkmode_max_speed(max_speed, phydev->supported);
}
/**
@@ -273,17 +271,11 @@ static int __set_phy_supported(struct ph
* is connected to a 1G PHY. This function allows the MAC to indicate its
* maximum speed, and so limit what the PHY will advertise.
*/
-int phy_set_max_speed(struct phy_device *phydev, u32 max_speed)
+void phy_set_max_speed(struct phy_device *phydev, u32 max_speed)
{
- int err;
-
- err = __set_phy_supported(phydev, max_speed);
- if (err)
- return err;
+ __set_phy_supported(phydev, max_speed);
phy_advertise_supported(phydev);
-
- return 0;
}
EXPORT_SYMBOL(phy_set_max_speed);
@@ -440,7 +432,9 @@ int phy_speed_down_core(struct phy_devic
if (min_common_speed == SPEED_UNKNOWN)
return -EINVAL;
- return __set_linkmode_max_speed(min_common_speed, phydev->advertising);
+ __set_linkmode_max_speed(min_common_speed, phydev->advertising);
+
+ return 0;
}
static void mmd_phy_indirect(struct mii_bus *bus, int phy_addr, int devad,
Index: net-next/include/linux/phy.h
===================================================================
--- net-next.orig/include/linux/phy.h
+++ net-next/include/linux/phy.h
@@ -1661,7 +1661,7 @@ int phy_disable_interrupts(struct phy_de
void phy_request_interrupt(struct phy_device *phydev);
void phy_free_interrupt(struct phy_device *phydev);
void phy_print_status(struct phy_device *phydev);
-int phy_set_max_speed(struct phy_device *phydev, u32 max_speed);
+void phy_set_max_speed(struct phy_device *phydev, u32 max_speed);
void phy_remove_link_mode(struct phy_device *phydev, u32 link_mode);
void phy_advertise_supported(struct phy_device *phydev);
void phy_support_sym_pause(struct phy_device *phydev);
Powered by blists - more mailing lists