netdev - [PATCH net] net: macsec: Verify that send_sci is on when setting Tx sci explicitly

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Sun, 30 Jan 2022 13:37:52 +0200
From:   Raed Salem <raeds@...dia.com>
To:     <sd@...asysnail.net>, <kuba@...nel.org>,
        <hannes@...essinduktion.org>
CC:     <davem@...emloft.net>, <netdev@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, Lior Nahmanson <liorna@...dia.com>,
        "Raed Salem" <raeds@...dia.com>
Subject: [PATCH net] net: macsec: Verify that send_sci is on when setting Tx sci explicitly

From: Lior Nahmanson <liorna@...dia.com>

When setting Tx sci explicit, the Rx side is expected to use this
sci and not recalculate it from the packet.However, in case of Tx sci
is explicit and send_sci is off, the receiver is wrongly recalculate
the sci from the source MAC address which most likely be different
than the explicit sci.

Fix by preventing such configuration when macsec newlink is established
and return EINVAL error code on such cases.

Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Lior Nahmanson <liorna@...dia.com>
Reviewed-by: Raed Salem <raeds@...dia.com>
Signed-off-by: Raed Salem <raeds@...dia.com>
---
 drivers/net/macsec.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c
index 33ff33c..3d08743 100644
--- a/drivers/net/macsec.c
+++ b/drivers/net/macsec.c
@@ -4018,6 +4018,15 @@ static int macsec_newlink(struct net *net, struct net_device *dev,
 	    !macsec_check_offload(macsec->offload, macsec))
 		return -EOPNOTSUPP;
 
+	/* send_sci must be set to true when transmit sci explicitly is set */
+	if ((data && data[IFLA_MACSEC_SCI]) &&
+	    (data && data[IFLA_MACSEC_INC_SCI])) {
+		u8 send_sci = !!nla_get_u8(data[IFLA_MACSEC_INC_SCI]);
+
+		if (!send_sci)
+			return -EINVAL;
+	}
+
 	if (data && data[IFLA_MACSEC_ICV_LEN])
 		icv_len = nla_get_u8(data[IFLA_MACSEC_ICV_LEN]);
 	mtu = real_dev->mtu - icv_len - macsec_extra_len(true);
-- 
1.8.3.1