lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Sun, 6 Feb 2022 00:49:51 +0300 From: Pavel Parkhomenko <Pavel.Parkhomenko@...kalelectronics.ru> To: Andrew Lunn <andrew@...n.ch>, Heiner Kallweit <hkallweit1@...il.com>, Russell King <linux@...linux.org.uk>, "David S. Miller" <davem@...emloft.net>, Jakub Kicinski <kuba@...nel.org>, Ron Madrid <ron_madrid@...global.net> CC: Alexey Malahov <Alexey.Malahov@...kalelectronics.ru>, Serge Semin <Sergey.Semin@...kalelectronics.ru>, Serge Semin <fancer.lancer@...il.com>, <stable@...r.kernel.org>, <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org> Subject: [PATCH net] net: phy: marvell: Fix MDI-x polarity setting in 88e1118-compatible PHYs When setting up autonegotiation for 88E1118R and compatible PHYs, a software reset of PHY is issued before setting up polarity. This is incorrect as changes of MDI Crossover Mode bits are disruptive to the normal operation and must be followed by a software reset to take effect. Let's patch m88e1118_config_aneg() to fix the issue mentioned before by invoking software reset of the PHY just after setting up MDI-x polarity. Fixes: 605f196efbf8 ("phy: Add support for Marvell 88E1118 PHY") Signed-off-by: Pavel Parkhomenko <Pavel.Parkhomenko@...kalelectronics.ru> Reviewed-by: Serge Semin <fancer.lancer@...il.com> Suggested-by: Andrew Lunn <andrew@...n.ch> Cc: stable@...r.kernel.org --- drivers/net/phy/marvell.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index fa71fb7a66b5..ab063961ac00 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -1213,16 +1213,15 @@ static int m88e1118_config_aneg(struct phy_device *phydev) { int err; - err = genphy_soft_reset(phydev); + err = marvell_set_polarity(phydev, phydev->mdix_ctrl); if (err < 0) return err; - err = marvell_set_polarity(phydev, phydev->mdix_ctrl); + err = genphy_config_aneg(phydev); if (err < 0) return err; - err = genphy_config_aneg(phydev); - return 0; + return genphy_soft_reset(phydev); } static int m88e1118_config_init(struct phy_device *phydev) -- 2.32.0
Powered by blists - more mailing lists