[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220208072024.GB18325@pengutronix.de>
Date: Tue, 8 Feb 2022 08:20:24 +0100
From: Oleksij Rempel <o.rempel@...gutronix.de>
To: Vladimir Oltean <vladimir.oltean@....com>
Cc: netdev@...r.kernel.org, Florian Fainelli <f.fainelli@...il.com>,
Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Hauke Mehrtens <hauke@...ke-m.de>,
Sean Wang <sean.wang@...iatek.com>,
Landen Chao <Landen.Chao@...iatek.com>,
DENG Qingfang <dqfext@...il.com>,
Matthias Brugger <matthias.bgg@...il.com>,
Claudiu Manoil <claudiu.manoil@....com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
UNGLinuxDriver@...rochip.com,
Oleksij Rempel <linux@...pel-privat.de>,
Bartosz Golaszewski <bgolaszewski@...libre.com>,
Laurentiu Tudor <laurentiu.tudor@....com>,
Rafael Richter <rafael.richter@....de>,
Daniel Klauer <daniel.klauer@....de>
Subject: Re: [PATCH net 2/7] net: dsa: ar9331: register the mdiobus under
devres
On Mon, Feb 07, 2022 at 06:15:48PM +0200, Vladimir Oltean wrote:
> As explained in commits:
> 74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
> 5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")
>
> mdiobus_free() will panic when called from devm_mdiobus_free() <-
> devres_release_all() <- __device_release_driver(), and that mdiobus was
> not previously unregistered.
>
> The ar9331 is an MDIO device, so the initial set of constraints that I
> thought would cause this (I2C or SPI buses which call ->remove on
> ->shutdown) do not apply. But there is one more which applies here.
>
> If the DSA master itself is on a bus that calls ->remove from ->shutdown
> (like dpaa2-eth, which is on the fsl-mc bus), there is a device link
> between the switch and the DSA master, and device_links_unbind_consumers()
> will unbind the ar9331 switch driver on shutdown.
>
> So the same treatment must be applied to all DSA switch drivers, which
> is: either use devres for both the mdiobus allocation and registration,
> or don't use devres at all.
>
> The ar9331 driver doesn't have a complex code structure for mdiobus
> removal, so just replace of_mdiobus_register with the devres variant in
> order to be all-devres and ensure that we don't free a still-registered
> bus.
>
> Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
> Signed-off-by: Vladimir Oltean <vladimir.oltean@....com>
Tested-by: Oleksij Rempel <o.rempel@...gutronix.de>
Thank you!
> ---
> drivers/net/dsa/qca/ar9331.c | 3 +--
> 1 file changed, 1 insertion(+), 2 deletions(-)
>
> diff --git a/drivers/net/dsa/qca/ar9331.c b/drivers/net/dsa/qca/ar9331.c
> index 3bda7015f0c1..e5098cfe44bc 100644
> --- a/drivers/net/dsa/qca/ar9331.c
> +++ b/drivers/net/dsa/qca/ar9331.c
> @@ -378,7 +378,7 @@ static int ar9331_sw_mbus_init(struct ar9331_sw_priv *priv)
> if (!mnp)
> return -ENODEV;
>
> - ret = of_mdiobus_register(mbus, mnp);
> + ret = devm_of_mdiobus_register(dev, mbus, mnp);
> of_node_put(mnp);
> if (ret)
> return ret;
> @@ -1066,7 +1066,6 @@ static void ar9331_sw_remove(struct mdio_device *mdiodev)
> }
>
> irq_domain_remove(priv->irqdomain);
> - mdiobus_unregister(priv->mbus);
> dsa_unregister_switch(&priv->ds);
>
> reset_control_assert(priv->sw_reset);
> --
> 2.25.1
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Powered by blists - more mailing lists