[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <YgKL7VK95d/0UgHS@shell.armlinux.org.uk>
Date: Tue, 8 Feb 2022 15:27:41 +0000
From: "Russell King (Oracle)" <linux@...linux.org.uk>
To: Ansuel Smith <ansuelsmth@...il.com>
Cc: Andrew Lunn <andrew@...n.ch>,
"David S. Miller" <davem@...emloft.net>,
Florian Fainelli <f.fainelli@...il.com>,
Jakub Kicinski <kuba@...nel.org>, netdev@...r.kernel.org,
Vivien Didelot <vivien.didelot@...il.com>,
Vladimir Oltean <olteanv@...il.com>
Subject: Re: [PATCH CFT net-next 0/6] net: dsa: qca8k: convert to phylink_pcs
and mark as non-legacy
On Tue, Feb 08, 2022 at 04:18:28PM +0100, Ansuel Smith wrote:
> On Tue, Feb 08, 2022 at 03:11:30PM +0000, Russell King (Oracle) wrote:
> > This series adds support into DSA for the mac_select_pcs method, and
> > converts qca8k to make use of this, eventually marking qca8k as non-
> > legacy.
> >
> > Patch 1 adds DSA support for mac_select_pcs.
>
> Was thinking... Is it possible to limit the polling just to sgmii/basex?
> Would save some overhead in the case fixed-rate is set and the link
> never change.
With this series, the decision to poll comes from the PCS "poll" member
when in inband mode. The PCS is selected by the mac_select_pcs
callback, which for this DSA device, will only be returned for SGMII or
1000BASE-X. Consequently, phylink will only poll the PCS if we are in
SGMII or 1000BASE-X mode.
Note that this polling has only be done if we're in inband mode and the
PCS requires polling, or in fixed-link mode if we have an IRQ-less GPIO
for link# state, or if poll_fixed_state is set in phylink_config.
PS, if you would like to ensure you're copied on patches to qca8k,
please add an entry in MAINTAINERS for this driver - I had to dig
through git history to try and work out who was maintaining this
driver. Thanks.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
Powered by blists - more mailing lists