[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5011cbdd-0172-0402-1053-4ced38e12333@gmail.com>
Date: Mon, 7 Feb 2022 18:45:34 -0800
From: Florian Fainelli <f.fainelli@...il.com>
To: Vladimir Oltean <vladimir.oltean@....com>, netdev@...r.kernel.org
Cc: Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Hauke Mehrtens <hauke@...ke-m.de>,
Sean Wang <sean.wang@...iatek.com>,
Landen Chao <Landen.Chao@...iatek.com>,
DENG Qingfang <dqfext@...il.com>,
Matthias Brugger <matthias.bgg@...il.com>,
Claudiu Manoil <claudiu.manoil@....com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
UNGLinuxDriver@...rochip.com,
Oleksij Rempel <linux@...pel-privat.de>,
Bartosz Golaszewski <bgolaszewski@...libre.com>,
Laurentiu Tudor <laurentiu.tudor@....com>,
Rafael Richter <rafael.richter@....de>,
Daniel Klauer <daniel.klauer@....de>
Subject: Re: [PATCH net 3/7] net: dsa: bcm_sf2: don't use devres for mdiobus
On 2/7/2022 8:15 AM, Vladimir Oltean wrote:
> As explained in commits:
> 74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
> 5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")
>
> mdiobus_free() will panic when called from devm_mdiobus_free() <-
> devres_release_all() <- __device_release_driver(), and that mdiobus was
> not previously unregistered.
>
> The Starfighter 2 is a platform device, so the initial set of
> constraints that I thought would cause this (I2C or SPI buses which call
> ->remove on ->shutdown) do not apply. But there is one more which
> applies here.
>
> If the DSA master itself is on a bus that calls ->remove from ->shutdown
> (like dpaa2-eth, which is on the fsl-mc bus), there is a device link
> between the switch and the DSA master, and device_links_unbind_consumers()
> will unbind the bcm_sf2 switch driver on shutdown.
>
> So the same treatment must be applied to all DSA switch drivers, which
> is: either use devres for both the mdiobus allocation and registration,
> or don't use devres at all.
>
> The bcm_sf2 driver has the code structure in place for orderly mdiobus
> removal, so just replace devm_mdiobus_alloc() with the non-devres
> variant, and add manual free where necessary, to ensure that we don't
> let devres free a still-registered bus.
>
> Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
> Signed-off-by: Vladimir Oltean <vladimir.oltean@....com>
Reviewed-by: Florian Fainelli <f.fainelli@...il.com>
--
Florian
Powered by blists - more mailing lists