| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <53537800-d01f-bed2-a776-bdbfd2d3f5f7@gmail.com>
Date: Fri, 11 Feb 2022 23:23:44 +0100
From: Heiner Kallweit <hkallweit1@...il.com>
To: Corentin Labbe <clabbe.montjoie@...il.com>
Cc: swsd@...ltek.com, davem@...emloft.net, kuba@...nel.org,
thierry.reding@...il.com, jonathanh@...dia.com,
linux-tegra@...r.kernel.org, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: NETDEV WATCHDOG: enp1s0 (r8169): transmit queue 0 timed out
On 11.02.2022 21:03, Corentin Labbe wrote:
> Le Fri, Feb 11, 2022 at 07:03:15PM +0100, Heiner Kallweit a écrit :
>> On 11.02.2022 11:32, Corentin Labbe wrote:
>>> Hello
>>>
>>> On my tegra124-jetson-tk1, I always got:
>>> [ 1311.064826] ------------[ cut here ]------------
>>> [ 1311.064880] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:477 dev_watchdog+0x2fc/0x300
>>> [ 1311.064976] NETDEV WATCHDOG: enp1s0 (r8169): transmit queue 0 timed out
>>> [ 1311.065011] Modules linked in:
>>> [ 1311.065074] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.16.7-dirty #7
>>> [ 1311.065116] Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
>>> [ 1311.065177] [<c01103e4>] (unwind_backtrace) from [<c010ade0>] (show_stack+0x10/0x14)
>>> [ 1311.065253] [<c010ade0>] (show_stack) from [<c0bbe884>] (dump_stack_lvl+0x40/0x4c)
>>> [ 1311.065322] [<c0bbe884>] (dump_stack_lvl) from [<c0122d6c>] (__warn+0xd0/0x12c)
>>> [ 1311.065379] [<c0122d6c>] (__warn) from [<c0bb8c48>] (warn_slowpath_fmt+0x90/0xb4)
>>> [ 1311.065434] [<c0bb8c48>] (warn_slowpath_fmt) from [<c0a0f0f0>] (dev_watchdog+0x2fc/0x300)
>>> [ 1311.065493] [<c0a0f0f0>] (dev_watchdog) from [<c01a8ab0>] (call_timer_fn+0x34/0x1a8)
>>> [ 1311.065554] [<c01a8ab0>] (call_timer_fn) from [<c01a8e50>] (__run_timers.part.0+0x22c/0x328)
>>> [ 1311.065599] [<c01a8e50>] (__run_timers.part.0) from [<c01a8f84>] (run_timer_softirq+0x38/0x68)
>>> [ 1311.065648] [<c01a8f84>] (run_timer_softirq) from [<c0101394>] (__do_softirq+0x124/0x3cc)
>>> [ 1311.065732] [<c0101394>] (__do_softirq) from [<c0129ff4>] (irq_exit+0xa4/0xd4)
>>> [ 1311.065818] [<c0129ff4>] (irq_exit) from [<c0100b90>] (__irq_svc+0x50/0x80)
>>> [ 1311.065860] Exception stack(0xc1101ed8 to 0xc1101f20)
>>> [ 1311.065884] 1ec0: 00000000 00000001
>>> [ 1311.065913] 1ee0: c110a800 00000060 00000001 eed889f8 c121eaa0 418a949d 00000001 00000131
>>> [ 1311.065940] 1f00: 00000001 00000131 00000000 c1101f28 c08bbe20 c08bbee8 60000113 ffffffff
>>> [ 1311.065962] [<c0100b90>] (__irq_svc) from [<c08bbee8>] (cpuidle_enter_state+0x270/0x480)
>>> [ 1311.066031] [<c08bbee8>] (cpuidle_enter_state) from [<c08bc15c>] (cpuidle_enter+0x50/0x54)
>>> [ 1311.066078] [<c08bc15c>] (cpuidle_enter) from [<c015a658>] (do_idle+0x1e0/0x298)
>>> [ 1311.066133] [<c015a658>] (do_idle) from [<c015a9e0>] (cpu_startup_entry+0x18/0x1c)
>>> [ 1311.066174] [<c015a9e0>] (cpu_startup_entry) from [<c1000fc8>] (start_kernel+0x678/0x6bc)
>>> [ 1311.066242] ---[ end trace 3df1a997f30c7eb8 ]---
>>> [ 1311.083269] r8169 0000:01:00.0 enp1s0: rtl_rxtx_empty_cond == 0 (loop: 42, delay: 100).
>>> [ 2671.118597] r8169 0000:01:00.0 enp1s0: rtl_rxtx_empty_cond == 0 (loop: 42, delay: 100).
>>> [27521.391461] r8169 0000:01:00.0 enp1s0: rtl_rxtx_empty_cond == 0 (loop: 42, delay: 100).
>>> [47441.629280] r8169 0000:01:00.0 enp1s0: rtl_rxtx_empty_cond == 0 (loop: 42, delay: 100).
>>> [49046.691475] r8169 0000:01:00.0 enp1s0: rtl_rxtx_empty_cond == 0 (loop: 42, delay: 100).
>>> [53081.713430] r8169 0000:01:00.0 enp1s0: rtl_rxtx_empty_cond == 0 (loop: 42, delay: 100).
>>> [55101.737951] r8169 0000:01:00.0 enp1s0: rtl_rxtx_empty_cond == 0 (loop: 42, delay: 100).
>>> [59351.771382] r8169 0000:01:00.0 enp1s0: rtl_rxtx_empty_cond == 0 (loop: 42, delay: 100).
>>> [60491.797371] r8169 0000:01:00.0 enp1s0: rtl_rxtx_empty_cond == 0 (loop: 42, delay: 100).
>>> [61351.805499] r8169 0000:01:00.0 enp1s0: rtl_rxtx_empty_cond == 0 (loop: 42, delay: 100).
>>> [69631.911327] r8169 0000:01:00.0 enp1s0: rtl_rxtx_empty_cond == 0 (loop: 42, delay: 100).
>>> [71246.958267] r8169 0000:01:00.0 enp1s0: rtl_rxtx_empty_cond == 0 (loop: 42, delay: 100).
>>> [86522.110241] r8169 0000:01:00.0 enp1s0: rtl_rxtx_empty_cond == 0 (loop: 42, delay: 100).
>>> [88507.174307] r8169 0000:01:00.0 enp1s0: rtl_rxtx_empty_cond == 0 (loop: 42, delay: 100).
>>> [104612.315286] r8169 0000:01:00.0 enp1s0: rtl_rxtx_empty_cond == 0 (loop: 42, delay: 100).
>>> [132797.695339] r8169 0000:01:00.0 enp1s0: rtl_rxtx_empty_cond == 0 (loop: 42, delay: 100).
>>>
>>> This happen since at least 5.10.
>>> Any idea on how to debug this ?
>>>
>> For whatever reason the chip locked up what results in the tx timeout and the following
>> rtl_rxtx_empty_cond == 0 message. However the chip soft reset in the timeout handler
>> seems to help.
>>
>> Typically these timeouts are hard to debug because there's no public datasheets
>> and errata information.
>>
>> Few questions:
>> - Is this a mainline or a downstream kernel?
>
> Hello
>
> It is a mainline kernel 5.16.7 (only hack is a patch to print which firmware is loaded).
> I always used only mainline on it.
>
>> - Full dmesg log would help (e.g. to identify exact chip version).
>
> I put it down this mail
>
>> - Does the issue correlate with specific activity or specific types of traffic?
>
> It seems to happen more often when I do some NBD, but not always.
> This board is used as a LAVA worker so it do lot of network (NBD, tftp, image download), I believed it happend when some network activity is done.
>
>> - Is the interface operating in promiscuous mode (e.g. part of a bridge)?
>
> No
>
>>
>> At first you could try to disable all hw offloading / ASPM / EEE.
>>
>
> I will try
>
>> There's also a small chance that the issue is linked to a specific link partner.
>> So you could test whether issue persists with another switch in between.
>> Or with a different link partner.
>>
>> Ar you aware of any earlier kernel version where the issue did not happen?
>> Then you could bisect.
>
> The oldest kernel I found on it is 5.1.21, but I dont remember if I hit this problem on it (the board is really used only for one year).
> Anyway, the problem is too random (aka the need to wait a long time) to be easily bisected.
> I tried to do some iperf for triggering it faster, but it do not work.
> Some times it happend straigth on the boot, sometime after days.
>
> iThanks for you hints
> Regards
>
> [ 0.000000] Booting Linux on physical CPU 0x0
> [ 0.000000] Linux version 5.16.9-dirty (compile@Red) (armv7a-unknown-linux-gnueabihf-gcc (Gentoo 11.2.0 p1) 11.2.0, GNU ld (Gentoo 2.37_p1 p0) 2.37) #8 SMP PREEMPT Fri Feb 11 11:06:53 CET 2022
> [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
> [ 0.000000] CPU: div instructions available: patching division code
> [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
> [ 0.000000] OF: fdt: Machine model: NVIDIA Tegra124 Jetson TK1
> [ 0.000000] Memory policy: Data cache writealloc
> [ 0.000000] cma: Reserved 64 MiB at 0xfbc00000
> [ 0.000000] Zone ranges:
> [ 0.000000] Normal [mem 0x0000000080000000-0x00000000afffffff]
> [ 0.000000] HighMem [mem 0x00000000b0000000-0x00000000ffefffff]
> [ 0.000000] Movable zone start for each node
> [ 0.000000] Early memory node ranges
> [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000ffefffff]
> [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffefffff]
> [ 0.000000] percpu: Embedded 17 pages/cpu s36972 r8192 d24468 u69632
> [ 0.000000] pcpu-alloc: s36972 r8192 d24468 u69632 alloc=17*4096
> [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
> [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522304
> [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/ram0
> [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
> [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
> [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
> [ 0.000000] Memory: 1977032K/2096128K available (12288K kernel code, 1541K rwdata, 4592K rodata, 1024K init, 7237K bss, 53560K reserved, 65536K cma-reserved, 1244160K highmem)
> [ 0.000000] trace event string verifier disabled
> [ 0.000000] Running RCU self tests
> [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
> [ 0.000000] rcu: RCU event tracing is enabled.
> [ 0.000000] rcu: RCU lockdep checking is enabled.
> [ 0.000000] Trampoline variant of Tasks RCU enabled.
> [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
> [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
> [ 0.000000] /interrupt-controller@...04000: 160 interrupts forwarded to /interrupt-controller@...41000
> [ 0.000000] random: get_random_bytes called from start_kernel+0x538/0x6e8 with crng_init=0
> [ 0.000002] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
> [ 0.000049] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
> [ 0.000099] Switching to timer-based delay loop, resolution 1000ns
> [ 0.000956] clocksource: tegra_suspend_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
> [ 0.001822] arch_timer: cp15 timer(s) running at 12.00MHz (virt).
> [ 0.001855] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns
> [ 0.001887] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns
> [ 0.001914] Switching to timer-based delay loop, resolution 83ns
> [ 0.004212] Console: colour dummy device 80x30
> [ 0.004271] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
> [ 0.004292] ... MAX_LOCKDEP_SUBCLASSES: 8
> [ 0.004313] ... MAX_LOCK_DEPTH: 48
> [ 0.004333] ... MAX_LOCKDEP_KEYS: 8192
> [ 0.004353] ... CLASSHASH_SIZE: 4096
> [ 0.004372] ... MAX_LOCKDEP_ENTRIES: 32768
> [ 0.004393] ... MAX_LOCKDEP_CHAINS: 65536
> [ 0.004412] ... CHAINHASH_SIZE: 32768
> [ 0.004432] memory used by lock dependency info: 4061 kB
> [ 0.004453] memory used for stack traces: 2112 kB
> [ 0.004472] per task-struct memory footprint: 1536 bytes
> [ 0.004585] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000)
> [ 0.004625] pid_max: default: 32768 minimum: 301
> [ 0.005363] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
> [ 0.005400] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
> [ 0.010406] CPU: Testing write buffer coherency: ok
> [ 0.010667] CPU0: Spectre v2: using ICIALLU workaround
> [ 0.012273] /cpus/cpu@0 missing clock-frequency property
> [ 0.012381] /cpus/cpu@1 missing clock-frequency property
> [ 0.012487] /cpus/cpu@2 missing clock-frequency property
> [ 0.012599] /cpus/cpu@3 missing clock-frequency property
> [ 0.012655] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
> [ 0.016749] Running RCU-tasks wait API self tests
> [ 0.018313] Setting up static identity map for 0x80100000 - 0x801000ac
> [ 0.019163] rcu: Hierarchical SRCU implementation.
> [ 0.021641] Tegra Revision: A01 SKU: 129 CPU Process: 1 SoC Process: 1
> [ 0.024462] smp: Bringing up secondary CPUs ...
> [ 0.030226] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
> [ 0.030245] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
> [ 0.036611] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
> [ 0.036630] CPU2: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
> [ 0.042060] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
> [ 0.042080] CPU3: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
> [ 0.042754] smp: Brought up 1 node, 4 CPUs
> [ 0.042789] SMP: Total of 4 processors activated (96.00 BogoMIPS).
> [ 0.042821] CPU: All CPU(s) started in SVC mode.
> [ 0.046561] devtmpfs: initialized
> [ 0.175914] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
> [ 0.199609] DMA-API: preallocated 65536 debug entries
> [ 0.199649] DMA-API: debugging enabled by kernel config
> [ 0.199678] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
> [ 0.199761] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
> [ 0.201905] pinctrl core: initialized pinctrl subsystem
> [ 0.207533] NET: Registered PF_NETLINK/PF_ROUTE protocol family
> [ 0.214622] DMA: preallocated 256 KiB pool for atomic coherent allocations
> [ 0.223466] thermal_sys: Registered thermal governor 'step_wise'
> [ 0.227650] cpuidle: using governor menu
> [ 0.233442] Callback from call_rcu_tasks() invoked.
> [ 0.350750] No ATAGs?
> [ 0.351337] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
> [ 0.351429] hw-breakpoint: maximum watchpoint size is 8 bytes.
> [ 0.387243] platform 50000000.host1x: Adding to iommu group 0
> [ 0.387747] platform 57000000.gpu: Adding to iommu group 1
> [ 0.482354] iommu: Default domain type: Translated
> [ 0.482389] iommu: DMA domain TLB invalidation policy: strict mode
> [ 0.484129] vgaarb: loaded
> [ 0.487758] SCSI subsystem initialized
> [ 0.488614] libata version 3.00 loaded.
> [ 0.490046] usbcore: registered new interface driver usbfs
> [ 0.490386] usbcore: registered new interface driver hub
> [ 0.490638] usbcore: registered new device driver usb
> [ 0.491247] mc: Linux media interface: v0.10
> [ 0.491464] videodev: Linux video capture interface: v2.00
> [ 0.491823] pps_core: LinuxPPS API ver. 1 registered
> [ 0.491852] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@...ux.it>
> [ 0.491972] PTP clock support registered
> [ 0.494230] Advanced Linux Sound Architecture Driver Initialized.
> [ 0.501683] clocksource: Switched to clocksource arch_sys_counter
> [ 1.064555] NET: Registered PF_INET protocol family
> [ 1.065326] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
> [ 1.068893] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 22528 bytes, linear)
> [ 1.069511] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
> [ 1.069834] TCP bind hash table entries: 8192 (order: 6, 327680 bytes, linear)
> [ 1.072133] TCP: Hash tables configured (established 8192 bind 8192)
> [ 1.073110] UDP hash table entries: 512 (order: 3, 49152 bytes, linear)
> [ 1.073493] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes, linear)
> [ 1.074522] NET: Registered PF_UNIX/PF_LOCAL protocol family
> [ 1.077404] RPC: Registered named UNIX socket transport module.
> [ 1.077497] RPC: Registered udp transport module.
> [ 1.077527] RPC: Registered tcp transport module.
> [ 1.077557] RPC: Registered tcp NFSv4.1 backchannel transport module.
> [ 1.077592] PCI: CLS 0 bytes, default 64
> [ 1.080856] Trying to unpack rootfs image as initramfs...
> [ 1.092098] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
> [ 1.099572] Initialise system trusted keyrings
> [ 1.100320] workingset: timestamp_bits=14 max_order=19 bucket_order=5
> [ 1.104161] squashfs: version 4.0 (2009/01/31) Phillip Lougher
> [ 1.106223] NFS: Registering the id_resolver key type
> [ 1.106374] Key type id_resolver registered
> [ 1.106468] Key type id_legacy registered
> [ 1.106554] Installing knfsd (copyright (C) 1996 okir@...ad.swb.de).
> [ 1.204436] Key type asymmetric registered
> [ 1.204538] Asymmetric key parser 'x509' registered
> [ 1.205487] bounce: pool size: 64 pages
> [ 1.205789] io scheduler mq-deadline registered
> [ 1.205823] io scheduler kyber registered
> [ 1.245302] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver registered 32 channels
> [ 1.250435] tegra-pmc 7000e400.pmc: emergency thermal reset enabled
> [ 1.253762] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
> [ 1.269652] printk: console [ttyS0] disabled
> [ 1.270206] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 84, base_baud = 25500000) is a Tegra
> [ 1.970538] Freeing initrd memory: 6508K
> [ 1.971426] printk: console [ttyS0] enabled
> [ 2.141847] 70006000.serial: ttyTHS1 at MMIO 0x70006000 (irq = 82, base_baud = 0) is a TEGRA_UART
> [ 2.153719] 70006040.serial: ttyTHS2 at MMIO 0x70006040 (irq = 83, base_baud = 0) is a TEGRA_UART
> [ 2.170773] platform 54200000.dc: Adding to iommu group 2
> [ 2.179772] platform 54240000.dc: Adding to iommu group 2
> [ 2.191903] platform 54340000.vic: Adding to iommu group 2
> [ 2.266385] brd: module loaded
> [ 2.294072] loop: module loaded
> [ 2.312252] igb: Intel(R) Gigabit Ethernet Network Driver
> [ 2.317669] igb: Copyright (c) 2007-2014 Intel Corporation.
> [ 2.323739] pegasus: Pegasus/Pegasus II USB Ethernet driver
> [ 2.329527] usbcore: registered new interface driver pegasus
> [ 2.335536] usbcore: registered new interface driver asix
> [ 2.341131] usbcore: registered new interface driver ax88179_178a
> [ 2.347493] usbcore: registered new interface driver cdc_ether
> [ 2.353694] usbcore: registered new interface driver smsc75xx
> [ 2.359712] usbcore: registered new interface driver smsc95xx
> [ 2.365729] usbcore: registered new interface driver net1080
> [ 2.371652] usbcore: registered new interface driver cdc_subset
> [ 2.377766] usbcore: registered new interface driver zaurus
> [ 2.383717] usbcore: registered new interface driver cdc_ncm
> [ 2.390723] tegra-phy 7d000000.usb-phy: supply vbus not found, using dummy regulator
> [ 2.400292] tegra-phy 7d004000.usb-phy: supply vbus not found, using dummy regulator
> [ 2.409454] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 2.416070] ehci-pci: EHCI PCI platform driver
> [ 2.421997] usbcore: registered new interface driver cdc_acm
> [ 2.427671] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
> [ 2.435958] usbcore: registered new interface driver cdc_wdm
> [ 2.441973] usbcore: registered new interface driver usb-storage
> [ 2.448464] usbcore: registered new interface driver ch341
> [ 2.454353] usbserial: USB Serial support registered for ch341-uart
> [ 2.460880] usbcore: registered new interface driver cp210x
> [ 2.466784] usbserial: USB Serial support registered for cp210x
> [ 2.472951] usbcore: registered new interface driver ftdi_sio
> [ 2.478868] usbserial: USB Serial support registered for FTDI USB Serial Device
> [ 2.486425] usbcore: registered new interface driver pl2303
> [ 2.492217] usbserial: USB Serial support registered for pl2303
> [ 2.561321] ci_hdrc ci_hdrc.1: EHCI Host Controller
> [ 2.566661] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
> [ 2.601775] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.10
> [ 2.614047] hub 1-0:1.0: USB hub found
> [ 2.618259] hub 1-0:1.0: 1 port detected
> [ 2.639005] tegra_rtc 7000e000.rtc: registered as rtc1
> [ 2.644279] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
> [ 2.653796] i2c_dev: i2c /dev entries driver
> [ 2.666308] at24 0-0056: supply vcc not found, using dummy regulator
> [ 2.676438] at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write
> [ 2.707558] as3722 4-0040: AS3722 with revision 0x1 found
> [ 2.758609] +VDDIO_SDMMC3: bypassed regulator has no supply!
> [ 2.764517] as3722-regulator as3722-regulator: regulator 13 register failed -517
> [ 2.792203] as3722-rtc as3722-rtc: registered as rtc0
> [ 2.797980] as3722-rtc as3722-rtc: setting system clock to 2022-02-11T10:43:54 UTC (1644576234)
> [ 2.806827] as3722-rtc as3722-rtc: RTC interrupt 133
> [ 2.826528] usbcore: registered new interface driver uvcvideo
> [ 2.832401] gspca_main: v2.14.0 registered
> [ 2.841054] lm90 0-004c: supply vcc not found, using dummy regulator
> [ 2.856526] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0)
> [ 2.869555] sdhci: Secure Digital Host Controller Interface driver
> [ 2.875827] sdhci: Copyright(c) Pierre Ossman
> [ 2.880199] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
> [ 2.882388] usbcore: registered new interface driver vub300
> [ 2.894509] sdhci-pltfm: SDHCI platform and OF driver helper
> [ 2.902747] sdhci-tegra 700b0400.mmc: Got CD GPIO
> [ 2.904701] usbcore: registered new interface driver usbhid
> [ 2.907649] sdhci-tegra 700b0400.mmc: Got WP GPIO
> [ 2.913252] usbhid: USB HID core driver
> [ 2.918259] mmc1: Invalid maximum block size, assuming 512 bytes
> [ 2.931027] tegra-emc 7001b000.external-memory-controller: 64bit DRAM bus
> [ 2.940366] tegra-emc 7001b000.external-memory-controller: OPP HW ver. 0x2, current clock rate 924 MHz
> [ 2.965069] mmc1: SDHCI controller on 700b0600.mmc [700b0600.mmc] using ADMA 64-bit
> [ 2.990955] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input0
> [ 3.046086] mmc1: new high speed MMC card at address 0001
> [ 3.056650] mmcblk1: mmc1:0001 SEM16G 14.7 GiB
> [ 3.074616] mmcblk1boot0: mmc1:0001 SEM16G 4.00 MiB
> [ 3.088449] mmcblk1boot1: mmc1:0001 SEM16G 4.00 MiB
> [ 3.100769] mmcblk1rpmb: mmc1:0001 SEM16G 4.00 MiB, chardev (246:0)
> [ 3.408386] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub
> [ 3.450488] input: NVIDIA Tegra Jetson TK1 Headphones Jack as /devices/soc0/sound/sound/card1/input1
> [ 3.471562] NET: Registered PF_INET6 protocol family
> [ 3.482130] Segment Routing with IPv6
> [ 3.485926] In-situ OAM (IOAM) with IPv6
> [ 3.490377] mip6: Mobile IPv6
> [ 3.493743] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
> [ 3.507140] NET: Registered PF_PACKET protocol family
> [ 3.512403] NET: Registered PF_KEY protocol family
> [ 3.517665] Bridge firewalling registered
> [ 3.522602] Key type dns_resolver registered
> [ 3.532022] Registering SWP/SWPB emulation handler
> [ 3.537626] Loading compiled-in X.509 certificates
> [ 3.600034] reg-fixed-voltage regulator@11: nonexclusive access to GPIO for regulator@11
> [ 3.612432] tegra-pcie 1003000.pcie: host bridge /pcie@...3000 ranges:
> [ 3.619135] tegra-pcie 1003000.pcie: MEM 0x0001000000..0x0001001fff -> 0x0001000000
> [ 3.627447] tegra-pcie 1003000.pcie: IO 0x0012000000..0x001200ffff -> 0x0000000000
> [ 3.635958] tegra-pcie 1003000.pcie: MEM 0x0013000000..0x001fffffff -> 0x0013000000
> [ 3.644228] tegra-pcie 1003000.pcie: MEM 0x0020000000..0x003fffffff -> 0x0020000000
> [ 3.653142] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration
> [ 3.683308] tegra-hdmi 54280000.hdmi: failed to get PLL regulator: -517
> [ 3.706377] ci_hdrc ci_hdrc.2: EHCI Host Controller
> [ 3.711755] ci_hdrc ci_hdrc.2: new USB bus registered, assigned bus number 2
> [ 3.741952] ci_hdrc ci_hdrc.2: USB 2.0 started, EHCI 1.10
> [ 3.753585] hub 2-0:1.0: USB hub found
> [ 3.757745] hub 2-0:1.0: 1 port detected
> [ 3.761865] random: fast init done
> [ 3.766834] as3722-regulator as3722-regulator: DMA mask not set
> [ 3.802562] +VDDIO_SDMMC3: bypassed regulator has no supply!
> [ 3.831837] sdhci-tegra 700b0400.mmc: Got CD GPIO
> [ 3.836728] sdhci-tegra 700b0400.mmc: Got WP GPIO
> [ 3.842399] usb2-0: supply vbus not found, using dummy regulator
> [ 3.850220] usb2-1: supply vbus not found, using dummy regulator
> [ 3.858715] mmc0: Invalid maximum block size, assuming 512 bytes
> [ 3.858984] usb3-0: supply vbus not found, using dummy regulator
> [ 3.874560] tegra-pcie 1003000.pcie: host bridge /pcie@...3000 ranges:
> [ 3.881279] tegra-pcie 1003000.pcie: MEM 0x0001000000..0x0001001fff -> 0x0001000000
> [ 3.889626] tegra-pcie 1003000.pcie: IO 0x0012000000..0x001200ffff -> 0x0000000000
> [ 3.897940] tegra-pcie 1003000.pcie: MEM 0x0013000000..0x001fffffff -> 0x0013000000
> [ 3.903824] mmc0: SDHCI controller on 700b0400.mmc [700b0400.mmc] using ADMA 64-bit
> [ 3.906202] tegra-pcie 1003000.pcie: MEM 0x0020000000..0x003fffffff -> 0x0020000000
> [ 3.924314] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration
> [ 3.939032] tegra-pcie 1003000.pcie: probing port 0, using 2 lanes
> [ 3.947810] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes
> [ 3.988295] mmc0: new high speed SDHC card at address 1388
> [ 3.998143] mmcblk0: mmc0:1388 NCard 7.32 GiB
> [ 4.013824] mmcblk0: p1 p2 p3 < p5 >
> [ 5.184002] tegra-pcie 1003000.pcie: link 0 down, ignoring
> [ 5.195101] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00
> [ 5.201409] pci_bus 0000:00: root bus resource [bus 00-ff]
> [ 5.207046] pci_bus 0000:00: root bus resource [mem 0x01000000-0x01001fff]
> [ 5.214268] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
> [ 5.220493] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
> [ 5.227506] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref]
> [ 5.235825] pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400
> [ 5.242008] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits
> [ 5.252056] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits
> [ 5.261922] pci 0000:00:02.0: enabling Extended Tags
> [ 5.266914] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x88 may corrupt adjacent RW1C bits
> [ 5.276762] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x3e may corrupt adjacent RW1C bits
> [ 5.287180] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 5.293901] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4c may corrupt adjacent RW1C bits
> [ 5.311321] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x3e may corrupt adjacent RW1C bits
> [ 5.321342] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits
> [ 5.331090] pci_bus 0000:00: 1-byte config write to 0000:00:02.0 offset 0xc may corrupt adjacent RW1C bits
> [ 5.340825] PCI: bus0: Fast back to back transfers disabled
> [ 5.346494] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
> [ 5.354735] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x3e may corrupt adjacent RW1C bits
> [ 5.364576] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x3e may corrupt adjacent RW1C bits
> [ 5.375274] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
> [ 5.381361] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff]
> [ 5.387247] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
> [ 5.394178] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
> [ 5.401937] pci 0000:01:00.0: supports D1 D2
> [ 5.406228] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 5.419641] PCI: bus1: Fast back to back transfers disabled
> [ 5.425315] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
> [ 5.432246] pci 0000:00:02.0: BAR 8: assigned [mem 0x13000000-0x130fffff]
> [ 5.439060] pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref]
> [ 5.446900] pci 0000:00:02.0: BAR 7: assigned [io 0x1000-0x1fff]
> [ 5.453120] pci 0000:01:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref]
> [ 5.460922] pci 0000:01:00.0: BAR 2: assigned [mem 0x13000000-0x13000fff 64bit]
> [ 5.468360] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff]
> [ 5.474562] pci 0000:00:02.0: PCI bridge to [bus 01]
> [ 5.479734] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]
> [ 5.485938] pci 0000:00:02.0: bridge window [mem 0x13000000-0x130fffff]
> [ 5.492825] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref]
> [ 5.500675] pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge
> [ 5.508377] pcieport 0000:00:02.0: enabling device (0140 -> 0143)
> [ 5.515546] pcieport 0000:00:02.0: PME: Signaling with IRQ 33
> [ 5.523776] r8169 0000:01:00.0: enabling device (0140 -> 0143)
> [ 5.602683] r8169 0000:01:00.0 eth0: RTL8168g/8111g, 00:04:4b:2f:50:23, XID 4c0, IRQ 153
> [ 5.610809] r8169 0000:01:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
> [ 5.782925] drm drm: [drm] Cannot find any crtc or sizes
> [ 5.790230] drm drm: [drm] Cannot find any crtc or sizes
> [ 5.801286] [drm] Initialized tegra 1.0.0 20120330 for drm on minor 0
> [ 5.809907] tegra-ahci 70027000.sata: supply ahci not found, using dummy regulator
> [ 5.818442] tegra-ahci 70027000.sata: supply phy not found, using dummy regulator
> [ 5.827178] tegra-ahci 70027000.sata: supply target not found, using dummy regulator
> [ 5.840550] tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode
> [ 5.849776] tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pmp pio slum part sadm sds apst
> [ 5.881335] scsi host0: tegra-ahci
> [ 5.889532] scsi host1: tegra-ahci
> [ 5.894747] ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 94
> [ 5.902922] ata2: DUMMY
> [ 5.914153] firmware_class: Loading firmware: nvidia/tegra124/xusb.bin
> [ 5.922819] firmware_class: _request_firmware end
> [ 5.936297] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC
> [ 5.944058] tegra-xusb 70090000.usb: xHCI Host Controller
> [ 5.949794] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 3
> [ 5.964878] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x0000000000010010
> [ 5.974654] tegra-xusb 70090000.usb: irq 96, io mem 0x70090000
> [ 5.986834] hub 3-0:1.0: USB hub found
> [ 5.991150] hub 3-0:1.0: 6 ports detected
> [ 6.002635] tegra-xusb 70090000.usb: xHCI Host Controller
> [ 6.008133] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 4
> [ 6.015920] tegra-xusb 70090000.usb: Host supports USB 3.0 SuperSpeed
> [ 6.024699] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
> [ 6.037740] hub 4-0:1.0: USB hub found
> [ 6.041898] hub 4-0:1.0: 2 ports detected
> [ 6.056307] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 696000 KHz, changing to: 714000 KHz
> [ 6.070127] input: gpio-keys as /devices/soc0/gpio-keys/input/input2
> [ 6.078502] ALSA device list:
> [ 6.081472] #0: tegra-hda at 0x70038000 irq 95
> [ 6.087228] #1: NVIDIA Tegra Jetson TK1
> [ 6.236917] ata1: SATA link down (SStatus 0 SControl 300)
> [ 6.256584] Freeing unused kernel image (initmem) memory: 1024K
> [ 6.264679] Run /init as init process
> [ 6.268439] with arguments:
> [ 6.268457] /init
> [ 6.268467] with environment:
> [ 6.268475] HOME=/
> [ 6.268483] TERM=linux
> [ 6.301930] usb 3-3: new high-speed USB device number 2 using tegra-xusb
> [ 6.537083] hub 3-3:1.0: USB hub found
> [ 6.541852] hub 3-3:1.0: 4 ports detected
> [ 6.664286] usb 4-1: new SuperSpeed USB device number 2 using tegra-xusb
> [ 6.710923] hub 4-1:1.0: USB hub found
> [ 6.715287] hub 4-1:1.0: 4 ports detected
> [ 6.912760] usb 3-3.2: new full-speed USB device number 3 using tegra-xusb
> [ 7.107039] ftdi_sio 3-3.2:1.0: FTDI USB Serial Device converter detected
> [ 7.114442] usb 3-3.2: Detected FT232RL
> [ 7.120455] usb 3-3.2: FTDI USB Serial Device converter now attached to ttyUSB0
> [ 7.173227] usb 4-1.4: new SuperSpeed USB device number 3 using tegra-xusb
> [ 7.232027] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 7.240230] ata1.00: ATA-8: OCZ-AGILITY3, 2.22, max UDMA/133
> [ 7.241876] hub 4-1.4:1.0: USB hub found
> [ 7.246051] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32)
> [ 7.250198] hub 4-1.4:1.0: 4 ports detected
> [ 7.270162] ata1.00: configured for UDMA/133
> [ 7.276047] scsi 0:0:0:0: Direct-Access ATA OCZ-AGILITY3 2.22 PQ: 0 ANSI: 5
> [ 7.287270] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 7.287882] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
> [ 7.300304] sd 0:0:0:0: [sda] Write Protect is off
> [ 7.305173] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 7.305370] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 7.331718] usb 3-3.3: new full-speed USB device number 4 using tegra-xusb
> [ 7.361488] sda: sda1
> [ 7.366534] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 7.492900] ftdi_sio 3-3.3:1.0: FTDI USB Serial Device converter detected
> [ 7.500347] usb 3-3.3: Detected FT232RL
> [ 7.507501] usb 3-3.3: FTDI USB Serial Device converter now attached to ttyUSB1
> [ 7.612746] usb 3-3.4: new high-speed USB device number 5 using tegra-xusb
> [ 7.783228] hub 3-3.4:1.0: USB hub found
> [ 7.787993] hub 3-3.4:1.0: 4 ports detected
> [ 8.132258] usb 3-3.4.1: new full-speed USB device number 6 using tegra-xusb
> [ 8.309411] ftdi_sio 3-3.4.1:1.0: FTDI USB Serial Device converter detected
> [ 8.316990] usb 3-3.4.1: Detected FT232RL
> [ 8.322963] usb 3-3.4.1: FTDI USB Serial Device converter now attached to ttyUSB2
> [ 8.432139] usb 3-3.4.2: new full-speed USB device number 7 using tegra-xusb
> [ 8.530617] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
> [ 8.577940] pl2303 3-3.4.2:1.0: pl2303 converter detected
> [ 8.586935] usb 3-3.4.2: pl2303 converter now attached to ttyUSB3
> [ 8.711662] usb 3-3.4.3: new full-speed USB device number 8 using tegra-xusb
> [ 8.870627] ftdi_sio 3-3.4.3:1.0: FTDI USB Serial Device converter detected
> [ 8.878468] usb 3-3.4.3: Detected FT232RL
> [ 8.884807] usb 3-3.4.3: FTDI USB Serial Device converter now attached to ttyUSB4
> [ 8.991691] usb 3-3.4.4: new full-speed USB device number 9 using tegra-xusb
> [ 9.135407] ch341 3-3.4.4:1.0: ch341-uart converter detected
> [ 9.143248] ch341-uart ttyUSB5: break control not supported, using simulated break
> [ 9.151257] usb 3-3.4.4: ch341-uart converter now attached to ttyUSB5
> [ 9.582588] random: apache2: uninitialized urandom read (8 bytes read)
> [ 9.589189] random: apache2: uninitialized urandom read (8 bytes read)
> [ 9.596039] random: apache2: uninitialized urandom read (8 bytes read)
> [ 18.530530] r8169 0000:01:00.0 enp1s0: renamed from eth0
> [ 19.577122] EXT4-fs (sda1): re-mounted. Opts: (null). Quota mode: disabled.
> [ 26.701844] random: crng init done
> [ 26.701871] random: 7 urandom warning(s) missed due to ratelimiting
> [ 36.323390] +USB0_VBUS_SW: disabling
> [ 38.407574] firmware_class: Loading firmware: rtl_nic/rtl8168g-2.fw
> [ 38.417338] firmware_class: _request_firmware end
> [ 38.451897] Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC)
> [ 38.735766] r8169 0000:01:00.0 enp1s0: Link is Down
> [ 41.379219] r8169 0000:01:00.0 enp1s0: Link is Up - 1Gbps/Full - flow control off
> [ 41.379301] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
> [ 46.232171] ------------[ cut here ]------------
> [ 46.232240] WARNING: CPU: 1 PID: 2144 at kernel/dma/debug.c:1073 check_for_illegal_area+0xec/0x180
> [ 46.232255] DMA-API: tegra-ahci 70027000.sata: device driver maps memory from kernel text or rodata [addr=3f4026ed] [len=4096]
> [ 46.232262] Modules linked in:
> [ 46.232271] CPU: 1 PID: 2144 Comm: containerd Not tainted 5.16.9-dirty #8
> [ 46.232277] Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
> [ 46.232283] [<c0110c24>] (unwind_backtrace) from [<c010b4d4>] (show_stack+0x10/0x14)
> [ 46.232294] [<c010b4d4>] (show_stack) from [<c0ce90b0>] (dump_stack_lvl+0x58/0x70)
> [ 46.232305] [<c0ce90b0>] (dump_stack_lvl) from [<c0124648>] (__warn+0xd0/0x134)
> [ 46.232314] [<c0124648>] (__warn) from [<c0ce2b00>] (warn_slowpath_fmt+0x90/0xb4)
> [ 46.232322] [<c0ce2b00>] (warn_slowpath_fmt) from [<c01cdcd8>] (check_for_illegal_area+0xec/0x180)
> [ 46.232330] [<c01cdcd8>] (check_for_illegal_area) from [<c01cfab4>] (debug_dma_map_sg+0xa4/0x424)
> [ 46.232340] [<c01cfab4>] (debug_dma_map_sg) from [<c01ca4d8>] (__dma_map_sg_attrs+0xc4/0x140)
> [ 46.232349] [<c01ca4d8>] (__dma_map_sg_attrs) from [<c01ca568>] (dma_map_sg_attrs+0x14/0x20)
> [ 46.232357] [<c01ca568>] (dma_map_sg_attrs) from [<c07cc408>] (ata_qc_issue+0x16c/0x414)
> [ 46.232366] [<c07cc408>] (ata_qc_issue) from [<c07d64f4>] (__ata_scsi_queuecmd+0x27c/0x4c4)
> [ 46.232376] [<c07d64f4>] (__ata_scsi_queuecmd) from [<c07d679c>] (ata_scsi_queuecmd+0x60/0x90)
> [ 46.232385] [<c07d679c>] (ata_scsi_queuecmd) from [<c07b36bc>] (scsi_queue_rq+0x440/0xb98)
> [ 46.232397] [<c07b36bc>] (scsi_queue_rq) from [<c05808fc>] (blk_mq_dispatch_rq_list+0x1d0/0x87c)
> [ 46.232406] [<c05808fc>] (blk_mq_dispatch_rq_list) from [<c0586628>] (__blk_mq_do_dispatch_sched+0x14c/0x2dc)
> [ 46.232415] [<c0586628>] (__blk_mq_do_dispatch_sched) from [<c0586b38>] (__blk_mq_sched_dispatch_requests+0x10c/0x168)
> [ 46.232423] [<c0586b38>] (__blk_mq_sched_dispatch_requests) from [<c0586c64>] (blk_mq_sched_dispatch_requests+0x34/0x5c)
> [ 46.232432] [<c0586c64>] (blk_mq_sched_dispatch_requests) from [<c057da8c>] (__blk_mq_run_hw_queue+0x5c/0xcc)
> [ 46.232442] [<c057da8c>] (__blk_mq_run_hw_queue) from [<c057dc9c>] (__blk_mq_delay_run_hw_queue+0x18c/0x1b4)
> [ 46.232451] [<c057dc9c>] (__blk_mq_delay_run_hw_queue) from [<c0586f80>] (blk_mq_sched_insert_requests+0xd0/0x320)
> [ 46.232460] [<c0586f80>] (blk_mq_sched_insert_requests) from [<c0581604>] (blk_mq_flush_plug_list+0x1c4/0x434)
> [ 46.232468] [<c0581604>] (blk_mq_flush_plug_list) from [<c0573d40>] (blk_flush_plug+0xd4/0x114)
> [ 46.232475] [<c0573d40>] (blk_flush_plug) from [<c0573f9c>] (blk_finish_plug+0x1c/0x28)
> [ 46.232482] [<c0573f9c>] (blk_finish_plug) from [<c0285740>] (read_pages+0x190/0x2bc)
> [ 46.232493] [<c0285740>] (read_pages) from [<c0285c1c>] (page_cache_ra_unbounded+0x164/0x230)
> [ 46.232501] [<c0285c1c>] (page_cache_ra_unbounded) from [<c027846c>] (filemap_fault+0x6d4/0xd04)
> [ 46.232509] [<c027846c>] (filemap_fault) from [<c02bacd0>] (__do_fault+0x38/0x104)
> [ 46.232519] [<c02bacd0>] (__do_fault) from [<c02c0920>] (handle_mm_fault+0xaa0/0xea8)
> [ 46.232528] [<c02c0920>] (handle_mm_fault) from [<c011563c>] (do_page_fault+0x15c/0x484)
> [ 46.232537] [<c011563c>] (do_page_fault) from [<c0115b2c>] (do_DataAbort+0x3c/0xb0)
> [ 46.232544] [<c0115b2c>] (do_DataAbort) from [<c0100e98>] (__dabt_usr+0x58/0x60)
> [ 46.232552] Exception stack(0xc6bc9fb0 to 0xc6bc9ff8)
> [ 46.232558] 9fa0: 00000001 bea726d8 014d40e0 01911fb8
> [ 46.232563] 9fc0: 00490000 0004cb15 00523858 006f6b68 00000000 b6f0c9c8 b6f0c9c8 bea72724
> [ 46.232569] 9fe0: 00000000 bea72678 b6ee2cbc b6ee41ec 200d0010 ffffffff
> [ 46.232573] irq event stamp: 15628
> [ 46.232577] hardirqs last enabled at (15627): [<c01dba64>] ktime_get+0x1a4/0x1c8
> [ 46.232585] hardirqs last disabled at (15628): [<c0cfbfb0>] _raw_spin_lock_irqsave+0x68/0x6c
> [ 46.232594] softirqs last enabled at (15332): [<c01015d8>] __do_softirq+0x328/0x590
> [ 46.232600] softirqs last disabled at (15327): [<c012cda8>] __irq_exit_rcu+0x128/0x1a8
> [ 46.232607] ---[ end trace 8655230c4b3626fb ]---
> [32852.339559] ext2 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
>
OK, so it's a RTL8168g. There was a time about kernel 5.8/5.9 when the same issue with RTL8168g
occurred on x86. For an unknown reason the issue was gone with 5.10. RTL8168g being affected only
makes me think that some chip hw issue might contribute to the problem.
For quite some time I haven't seen this issue being reported on x86, this might indicate that
the issue is platform-dependent. You're one of the few users with a system using RTL8168 on ARM.
Another potential root cause could be an issue with the respective PCIe sw or hw.
As a last resort you could switch to the r8168 vendor driver. At least for some affected x86 users
this helped. The vendor driver includes quite some undocumented magic, part of it may work around
the root cause of your issue.
Powered by blists - more mailing lists