netdev - [PATCH net-next resend 0/2] sfc: optimize RXQs count and affinities

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220216094139.15989-1-ihuguet@redhat.com>
Date:   Wed, 16 Feb 2022 10:41:37 +0100
From:   Íñigo Huguet <ihuguet@...hat.com>
To:     ecree.xilinx@...il.com, habetsm.xilinx@...il.com
Cc:     davem@...emloft.net, kuba@...nel.org, netdev@...r.kernel.org,
        Íñigo Huguet <ihuguet@...hat.com>
Subject: [PATCH net-next resend 0/2] sfc: optimize RXQs count and affinities

In sfc driver one RX queue per physical core was allocated by default.
Later on, IRQ affinities were set spreading the IRQs in all NUMA local
CPUs.

However, with that default configuration it result in a non very optimal
configuration in many modern systems. Specifically, in systems with hyper
threading and 2 NUMA nodes, affinities are set in a way that IRQs are
handled by all logical cores of one same NUMA node. Handling IRQs from
both hyper threading siblings has no benefit, and setting affinities to one
queue per physical core is neither a very good idea because there is a
performance penalty for moving data across nodes (I was able to check it
with some XDP tests using pktgen).

This patches reduce the default number of channels to one per physical
core in the local NUMA node. Then, they set IRQ affinities to CPUs in
the local NUMA node only. This way we save hardware resources since
channels are limited resources. We also leave more room for XDP_TX
channels without hitting driver's limit of 32 channels per interface.

Running performance tests using iperf with a SFC9140 device showed no
performance penalty for reducing the number of channels.

RX XDP tests showed that performance can go down to less than half if
the IRQ is handled by a CPU in a different NUMA node, which doesn't
happen with the new defaults from this patches.

Íñigo Huguet (2):
  sfc: default config to 1 channel/core in local NUMA node only
  sfc: set affinity hints in local NUMA node only

 drivers/net/ethernet/sfc/efx_channels.c | 62 +++++++++++++++++--------
 1 file changed, 43 insertions(+), 19 deletions(-)

-- 
2.31.1