| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <E1nKLsr-009NN1-HQ@rmk-PC.armlinux.org.uk>
Date: Wed, 16 Feb 2022 15:06:21 +0000
From: "Russell King (Oracle)" <rmk+kernel@...linux.org.uk>
To: Ansuel Smith <ansuelsmth@...il.com>
Cc: Andrew Lunn <andrew@...n.ch>,
"David S. Miller" <davem@...emloft.net>,
Florian Fainelli <f.fainelli@...il.com>,
Jakub Kicinski <kuba@...nel.org>, netdev@...r.kernel.org,
Vivien Didelot <vivien.didelot@...il.com>,
Vladimir Oltean <olteanv@...il.com>
Subject: [PATCH net-next 5/6] net: dsa: qca8k: move pcs configuration
Move the PCS configuration to qca8k_pcs_config().
Signed-off-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
---
drivers/net/dsa/qca8k.c | 151 ++++++++++++++++++++++------------------
1 file changed, 85 insertions(+), 66 deletions(-)
diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index 230411181379..e6c6ecdec9bb 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -1706,8 +1706,8 @@ qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
const struct phylink_link_state *state)
{
struct qca8k_priv *priv = ds->priv;
- int cpu_port_index, ret;
- u32 reg, val;
+ int cpu_port_index;
+ u32 reg;
switch (port) {
case 0: /* 1st CPU port */
@@ -1773,70 +1773,6 @@ qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
case PHY_INTERFACE_MODE_1000BASEX:
/* Enable SGMII on the port */
qca8k_write(priv, reg, QCA8K_PORT_PAD_SGMII_EN);
-
- /* Enable/disable SerDes auto-negotiation as necessary */
- ret = qca8k_read(priv, QCA8K_REG_PWS, &val);
- if (ret)
- return;
- if (phylink_autoneg_inband(mode))
- val &= ~QCA8K_PWS_SERDES_AEN_DIS;
- else
- val |= QCA8K_PWS_SERDES_AEN_DIS;
- qca8k_write(priv, QCA8K_REG_PWS, val);
-
- /* Configure the SGMII parameters */
- ret = qca8k_read(priv, QCA8K_REG_SGMII_CTRL, &val);
- if (ret)
- return;
-
- val |= QCA8K_SGMII_EN_SD;
-
- if (priv->ports_config.sgmii_enable_pll)
- val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX |
- QCA8K_SGMII_EN_TX;
-
- if (dsa_is_cpu_port(ds, port)) {
- /* CPU port, we're talking to the CPU MAC, be a PHY */
- val &= ~QCA8K_SGMII_MODE_CTRL_MASK;
- val |= QCA8K_SGMII_MODE_CTRL_PHY;
- } else if (state->interface == PHY_INTERFACE_MODE_SGMII) {
- val &= ~QCA8K_SGMII_MODE_CTRL_MASK;
- val |= QCA8K_SGMII_MODE_CTRL_MAC;
- } else if (state->interface == PHY_INTERFACE_MODE_1000BASEX) {
- val &= ~QCA8K_SGMII_MODE_CTRL_MASK;
- val |= QCA8K_SGMII_MODE_CTRL_BASEX;
- }
-
- qca8k_write(priv, QCA8K_REG_SGMII_CTRL, val);
-
- /* From original code is reported port instability as SGMII also
- * require delay set. Apply advised values here or take them from DT.
- */
- if (state->interface == PHY_INTERFACE_MODE_SGMII)
- qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg);
-
- /* For qca8327/qca8328/qca8334/qca8338 sgmii is unique and
- * falling edge is set writing in the PORT0 PAD reg
- */
- if (priv->switch_id == QCA8K_ID_QCA8327 ||
- priv->switch_id == QCA8K_ID_QCA8337)
- reg = QCA8K_REG_PORT0_PAD_CTRL;
-
- val = 0;
-
- /* SGMII Clock phase configuration */
- if (priv->ports_config.sgmii_rx_clk_falling_edge)
- val |= QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE;
-
- if (priv->ports_config.sgmii_tx_clk_falling_edge)
- val |= QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE;
-
- if (val)
- ret = qca8k_rmw(priv, reg,
- QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE |
- QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE,
- val);
-
break;
default:
dev_err(ds->dev, "xMII mode %s not supported for port %d\n",
@@ -1981,6 +1917,89 @@ static int qca8k_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
const unsigned long *advertising,
bool permit_pause_to_mac)
{
+ struct qca8k_priv *priv = pcs_to_qca8k_pcs(pcs)->priv;
+ int cpu_port_index, ret, port;
+ u32 reg, val;
+
+ port = pcs_to_qca8k_pcs(pcs)->port;
+ switch (port) {
+ case 0:
+ reg = QCA8K_REG_PORT0_PAD_CTRL;
+ cpu_port_index = QCA8K_CPU_PORT0;
+ break;
+
+ case 6:
+ reg = QCA8K_REG_PORT6_PAD_CTRL;
+ cpu_port_index = QCA8K_CPU_PORT6;
+ break;
+
+ default:
+ WARN_ON(1);
+ }
+
+ /* Enable/disable SerDes auto-negotiation as necessary */
+ ret = qca8k_read(priv, QCA8K_REG_PWS, &val);
+ if (ret)
+ return ret;
+ if (phylink_autoneg_inband(mode))
+ val &= ~QCA8K_PWS_SERDES_AEN_DIS;
+ else
+ val |= QCA8K_PWS_SERDES_AEN_DIS;
+ qca8k_write(priv, QCA8K_REG_PWS, val);
+
+ /* Configure the SGMII parameters */
+ ret = qca8k_read(priv, QCA8K_REG_SGMII_CTRL, &val);
+ if (ret)
+ return ret;
+
+ val |= QCA8K_SGMII_EN_SD;
+
+ if (priv->ports_config.sgmii_enable_pll)
+ val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX |
+ QCA8K_SGMII_EN_TX;
+
+ if (dsa_is_cpu_port(priv->ds, port)) {
+ /* CPU port, we're talking to the CPU MAC, be a PHY */
+ val &= ~QCA8K_SGMII_MODE_CTRL_MASK;
+ val |= QCA8K_SGMII_MODE_CTRL_PHY;
+ } else if (interface == PHY_INTERFACE_MODE_SGMII) {
+ val &= ~QCA8K_SGMII_MODE_CTRL_MASK;
+ val |= QCA8K_SGMII_MODE_CTRL_MAC;
+ } else if (interface == PHY_INTERFACE_MODE_1000BASEX) {
+ val &= ~QCA8K_SGMII_MODE_CTRL_MASK;
+ val |= QCA8K_SGMII_MODE_CTRL_BASEX;
+ }
+
+ qca8k_write(priv, QCA8K_REG_SGMII_CTRL, val);
+
+ /* From original code is reported port instability as SGMII also
+ * require delay set. Apply advised values here or take them from DT.
+ */
+ if (interface == PHY_INTERFACE_MODE_SGMII)
+ qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg);
+ /* For qca8327/qca8328/qca8334/qca8338 sgmii is unique and
+ * falling edge is set writing in the PORT0 PAD reg
+ */
+ if (priv->switch_id == QCA8K_ID_QCA8327 ||
+ priv->switch_id == QCA8K_ID_QCA8337)
+ reg = QCA8K_REG_PORT0_PAD_CTRL;
+
+ val = 0;
+
+ /* SGMII Clock phase configuration */
+ if (priv->ports_config.sgmii_rx_clk_falling_edge)
+ val |= QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE;
+
+ if (priv->ports_config.sgmii_tx_clk_falling_edge)
+ val |= QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE;
+
+ if (val)
+ ret = qca8k_rmw(priv, reg,
+ QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE |
+ QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE,
+ val);
+
+
return 0;
}
--
2.30.2
Powered by blists - more mailing lists