| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220222224758.11324-3-luizluca@gmail.com>
Date: Tue, 22 Feb 2022 19:47:58 -0300
From: Luiz Angelo Daros de Luca <luizluca@...il.com>
To: netdev@...r.kernel.org
Cc: linus.walleij@...aro.org, andrew@...n.ch, vivien.didelot@...il.com,
f.fainelli@...il.com, olteanv@...il.com, davem@...emloft.net,
kuba@...nel.org, alsi@...g-olufsen.dk, arinc.unal@...nc9.com,
Luiz Angelo Daros de Luca <luizluca@...il.com>
Subject: [PATCH net-next v3 2/2] net: dsa: realtek: rtl8365mb: add support for rtl8_4t
The trailing tag is also supported by this family. The default is still
rtl8_4 but now the switch supports changing the tag to rtl8_4t.
Reintroduce the dropped cpu in struct rtl8365mb (removed by 6147631).
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@...il.com>
---
drivers/net/dsa/realtek/rtl8365mb.c | 82 +++++++++++++++++++++++------
1 file changed, 67 insertions(+), 15 deletions(-)
diff --git a/drivers/net/dsa/realtek/rtl8365mb.c b/drivers/net/dsa/realtek/rtl8365mb.c
index 2ed592147c20..ff865af65d55 100644
--- a/drivers/net/dsa/realtek/rtl8365mb.c
+++ b/drivers/net/dsa/realtek/rtl8365mb.c
@@ -566,6 +566,7 @@ struct rtl8365mb_port {
* @chip_ver: chip silicon revision
* @port_mask: mask of all ports
* @learn_limit_max: maximum number of L2 addresses the chip can learn
+ * @cpu: CPU tagging and CPU port configuration for this chip
* @mib_lock: prevent concurrent reads of MIB counters
* @ports: per-port data
* @jam_table: chip-specific initialization jam table
@@ -580,6 +581,7 @@ struct rtl8365mb {
u32 chip_ver;
u32 port_mask;
u32 learn_limit_max;
+ struct rtl8365mb_cpu cpu;
struct mutex mib_lock;
struct rtl8365mb_port ports[RTL8365MB_MAX_NUM_PORTS];
const struct rtl8365mb_jam_tbl_entry *jam_table;
@@ -770,6 +772,16 @@ static enum dsa_tag_protocol
rtl8365mb_get_tag_protocol(struct dsa_switch *ds, int port,
enum dsa_tag_protocol mp)
{
+ struct realtek_priv *priv = ds->priv;
+ struct rtl8365mb_cpu *cpu;
+ struct rtl8365mb *mb;
+
+ mb = priv->chip_data;
+ cpu = &mb->cpu;
+
+ if (cpu->position == RTL8365MB_CPU_POS_BEFORE_CRC)
+ return DSA_TAG_PROTO_RTL8_4T;
+
return DSA_TAG_PROTO_RTL8_4;
}
@@ -1725,8 +1737,10 @@ static void rtl8365mb_irq_teardown(struct realtek_priv *priv)
}
}
-static int rtl8365mb_cpu_config(struct realtek_priv *priv, const struct rtl8365mb_cpu *cpu)
+static int rtl8365mb_cpu_config(struct realtek_priv *priv)
{
+ struct rtl8365mb *mb = priv->chip_data;
+ struct rtl8365mb_cpu *cpu = &mb->cpu;
u32 val;
int ret;
@@ -1752,6 +1766,42 @@ static int rtl8365mb_cpu_config(struct realtek_priv *priv, const struct rtl8365m
return 0;
}
+static int rtl8365mb_change_tag_protocol(struct dsa_switch *ds, int cpu_index,
+ enum dsa_tag_protocol proto)
+{
+ struct realtek_priv *priv = ds->priv;
+ struct rtl8365mb_cpu *cpu;
+ struct rtl8365mb *mb;
+ int ret;
+
+ mb = priv->chip_data;
+ cpu = &mb->cpu;
+
+ switch (proto) {
+ case DSA_TAG_PROTO_RTL8_4:
+ cpu->format = RTL8365MB_CPU_FORMAT_8BYTES;
+ cpu->position = RTL8365MB_CPU_POS_AFTER_SA;
+ break;
+ case DSA_TAG_PROTO_RTL8_4T:
+ cpu->format = RTL8365MB_CPU_FORMAT_8BYTES;
+ cpu->position = RTL8365MB_CPU_POS_BEFORE_CRC;
+ break;
+ /* The switch also supports a 4-byte format, similar to rtl4a but with
+ * the same 0x04 8-bit version and probably 8-bit port source/dest.
+ * There is no public doc about it. Not supported yet and it will probably
+ * never be.
+ */
+ default:
+ return -EPROTONOSUPPORT;
+ }
+
+ ret = rtl8365mb_cpu_config(priv);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
static int rtl8365mb_switch_init(struct realtek_priv *priv)
{
struct rtl8365mb *mb = priv->chip_data;
@@ -1798,13 +1848,14 @@ static int rtl8365mb_reset_chip(struct realtek_priv *priv)
static int rtl8365mb_setup(struct dsa_switch *ds)
{
struct realtek_priv *priv = ds->priv;
- struct rtl8365mb_cpu cpu = {0};
+ struct rtl8365mb_cpu *cpu;
struct dsa_port *cpu_dp;
struct rtl8365mb *mb;
int ret;
int i;
mb = priv->chip_data;
+ cpu = &mb->cpu;
ret = rtl8365mb_reset_chip(priv);
if (ret) {
@@ -1827,21 +1878,14 @@ static int rtl8365mb_setup(struct dsa_switch *ds)
dev_info(priv->dev, "no interrupt support\n");
/* Configure CPU tagging */
- cpu.trap_port = RTL8365MB_MAX_NUM_PORTS;
dsa_switch_for_each_cpu_port(cpu_dp, priv->ds) {
- cpu.mask |= BIT(cpu_dp->index);
+ cpu->mask |= BIT(cpu_dp->index);
- if (cpu.trap_port == RTL8365MB_MAX_NUM_PORTS)
- cpu.trap_port = cpu_dp->index;
+ if (cpu->trap_port == RTL8365MB_MAX_NUM_PORTS)
+ cpu->trap_port = cpu_dp->index;
}
-
- cpu.enable = cpu.mask > 0;
- cpu.insert = RTL8365MB_CPU_INSERT_TO_ALL;
- cpu.position = RTL8365MB_CPU_POS_AFTER_SA;
- cpu.rx_length = RTL8365MB_CPU_RXLEN_64BYTES;
- cpu.format = RTL8365MB_CPU_FORMAT_8BYTES;
-
- ret = rtl8365mb_cpu_config(priv, &cpu);
+ cpu->enable = cpu->mask > 0;
+ ret = rtl8365mb_cpu_config(priv);
if (ret)
goto out_teardown_irq;
@@ -1853,7 +1897,7 @@ static int rtl8365mb_setup(struct dsa_switch *ds)
continue;
/* Forward only to the CPU */
- ret = rtl8365mb_port_set_isolation(priv, i, cpu.mask);
+ ret = rtl8365mb_port_set_isolation(priv, i, cpu->mask);
if (ret)
goto out_teardown_irq;
@@ -1983,6 +2027,12 @@ static int rtl8365mb_detect(struct realtek_priv *priv)
mb->jam_table = rtl8365mb_init_jam_8365mb_vc;
mb->jam_size = ARRAY_SIZE(rtl8365mb_init_jam_8365mb_vc);
+ mb->cpu.trap_port = RTL8365MB_MAX_NUM_PORTS;
+ mb->cpu.insert = RTL8365MB_CPU_INSERT_TO_ALL;
+ mb->cpu.position = RTL8365MB_CPU_POS_AFTER_SA;
+ mb->cpu.rx_length = RTL8365MB_CPU_RXLEN_64BYTES;
+ mb->cpu.format = RTL8365MB_CPU_FORMAT_8BYTES;
+
break;
default:
dev_err(priv->dev,
@@ -1996,6 +2046,7 @@ static int rtl8365mb_detect(struct realtek_priv *priv)
static const struct dsa_switch_ops rtl8365mb_switch_ops_smi = {
.get_tag_protocol = rtl8365mb_get_tag_protocol,
+ .change_tag_protocol = rtl8365mb_change_tag_protocol,
.setup = rtl8365mb_setup,
.teardown = rtl8365mb_teardown,
.phylink_get_caps = rtl8365mb_phylink_get_caps,
@@ -2014,6 +2065,7 @@ static const struct dsa_switch_ops rtl8365mb_switch_ops_smi = {
static const struct dsa_switch_ops rtl8365mb_switch_ops_mdio = {
.get_tag_protocol = rtl8365mb_get_tag_protocol,
+ .change_tag_protocol = rtl8365mb_change_tag_protocol,
.setup = rtl8365mb_setup,
.teardown = rtl8365mb_teardown,
.phylink_get_caps = rtl8365mb_phylink_get_caps,
--
2.35.1
Powered by blists - more mailing lists