| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220222025230.2119189-11-roopa@nvidia.com>
Date: Tue, 22 Feb 2022 02:52:28 +0000
From: Roopa Prabhu <roopa@...dia.com>
To: <davem@...emloft.net>, <kuba@...nel.org>
CC: <netdev@...r.kernel.org>, <stephen@...workplumber.org>,
<nikolay@...ulusnetworks.com>, <idosch@...dia.com>,
<dsahern@...il.com>, <bpoirier@...dia.com>
Subject: [PATCH net-next v2 10/12] selftests: add new tests for vxlan vnifiltering
This patch adds a new test script test_vxlan_vnifiltering.sh
with tests for vni filtering api, various datapath tests.
Also has a test with a mix of traditional, metadata and vni
filtering devices inuse at the same time.
Signed-off-by: Roopa Prabhu <roopa@...dia.com>
---
.../selftests/net/test_vxlan_vnifiltering.sh | 581 ++++++++++++++++++
1 file changed, 581 insertions(+)
create mode 100755 tools/testing/selftests/net/test_vxlan_vnifiltering.sh
diff --git a/tools/testing/selftests/net/test_vxlan_vnifiltering.sh b/tools/testing/selftests/net/test_vxlan_vnifiltering.sh
new file mode 100755
index 000000000000..98abcb55b7c2
--- /dev/null
+++ b/tools/testing/selftests/net/test_vxlan_vnifiltering.sh
@@ -0,0 +1,581 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test is for checking the VXLAN vni filtering api and
+# datapath.
+# It simulates two hypervisors running two VMs each using four network
+# six namespaces: two for the HVs, four for the VMs. Each VM is
+# connected to a separate bridge. The VM's use overlapping vlans and
+# hence the separate bridge domain. Each vxlan device is a collect
+# metadata device with vni filtering and hence has the ability to
+# terminate configured vni's only.
+
+# +--------------------------------+ +------------------------------------+
+# | vm-11 netns | | vm-21 netns |
+# | | | |
+# |+------------+ +-------------+ | |+-------------+ +----------------+ |
+# ||veth-11.10 | |veth-11.20 | | ||veth-21.10 | | veth-21.20 | |
+# ||10.0.10.11/24 |10.0.20.11/24| | ||10.0.10.21/24| | 10.0.20.21/24 | |
+# |+------|-----+ +|------------+ | |+-----------|-+ +---|------------+ |
+# | | | | | | | |
+# | | | | | +------------+ |
+# | +------------+ | | | veth-21 | |
+# | | veth-11 | | | | | |
+# | | | | | +-----|------+ |
+# | +-----|------+ | | | |
+# | | | | | |
+# +------------|-------------------+ +---------------|--------------------+
+# +------------|-----------------------------------------|-------------------+
+# | +-----|------+ +-----|------+ |
+# | |vethhv-11 | |vethhv-21 | |
+# | +----|-------+ +-----|------+ |
+# | +---|---+ +---|--+ |
+# | | br1 | | br2 | |
+# | +---|---+ +---|--+ |
+# | +---|----+ +---|--+ |
+# | | vxlan1| |vxlan2| |
+# | +--|-----+ +--|---+ |
+# | | | |
+# | | +---------------------+ | |
+# | | |veth0 | | |
+# | +---------|172.16.0.1/24 -----------+ |
+# | |2002:fee1::1/64 | |
+# | hv-1 netns +--------|------------+ |
+# +-----------------------------|--------------------------------------------+
+# |
+# +-----------------------------|--------------------------------------------+
+# | hv-2 netns +--------|-------------+ |
+# | | veth0 | |
+# | +------| 172.16.0.2/24 |---+ |
+# | | | 2002:fee1::2/64 | | |
+# | | | | | |
+# | | +----------------------+ | - |
+# | | | |
+# | +-|-------+ +--------|-+ |
+# | | vxlan1 | | vxlan2 | |
+# | +----|----+ +---|------+ |
+# | +--|--+ +-|---+ |
+# | | br1 | | br2 | |
+# | +--|--+ +--|--+ |
+# | +-----|-------+ +----|-------+ |
+# | | vethhv-12 | |vethhv-22 | |
+# | +------|------+ +-------|----+ |
+# +-----------------|----------------------------|---------------------------+
+# | |
+# +-----------------|-----------------+ +--------|---------------------------+
+# | +-------|---+ | | +--|---------+ |
+# | | veth-12 | | | |veth-22 | |
+# | +-|--------|+ | | +--|--------|+ |
+# | | | | | | | |
+# |+----------|--+ +---|-----------+ | |+-------|-----+ +|---------------+ |
+# ||veth-12.10 | |veth-12.20 | | ||veth-22.10 | |veth-22.20 | |
+# ||10.0.10.12/24| |10.0.20.12/24 | | ||10.0.10.22/24| |10.0.20.22/24 | |
+# |+-------------+ +---------------+ | |+-------------+ +----------------+ |
+# | | | |
+# | | | |
+# | vm-12 netns | |vm-22 netns |
+# +-----------------------------------+ +------------------------------------+
+#
+#
+# This test tests the new vxlan vnifiltering api
+
+ret=0
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+# all tests in this script. Can be overridden with -t option
+TESTS="
+ vxlan_vnifilter_api
+ vxlan_vnifilter_datapath
+ vxlan_vnifilter_datapath_pervni
+ vxlan_vnifilter_datapath_mgroup
+ vxlan_vnifilter_datapath_mgroup_pervni
+ vxlan_vnifilter_metadata_and_traditional_mix
+"
+VERBOSE=0
+PAUSE_ON_FAIL=no
+PAUSE=no
+IP="ip -netns ns1"
+NS_EXEC="ip netns exec ns1"
+
+which ping6 > /dev/null 2>&1 && ping6=$(which ping6) || ping6=$(which ping)
+
+log_test()
+{
+ local rc=$1
+ local expected=$2
+ local msg="$3"
+
+ if [ ${rc} -eq ${expected} ]; then
+ printf " TEST: %-60s [ OK ]\n" "${msg}"
+ nsuccess=$((nsuccess+1))
+ else
+ ret=1
+ nfail=$((nfail+1))
+ printf " TEST: %-60s [FAIL]\n" "${msg}"
+ if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
+ echo
+ echo "hit enter to continue, 'q' to quit"
+ read a
+ [ "$a" = "q" ] && exit 1
+ fi
+ fi
+
+ if [ "${PAUSE}" = "yes" ]; then
+ echo
+ echo "hit enter to continue, 'q' to quit"
+ read a
+ [ "$a" = "q" ] && exit 1
+ fi
+}
+
+run_cmd()
+{
+ local cmd="$1"
+ local out
+ local stderr="2>/dev/null"
+
+ if [ "$VERBOSE" = "1" ]; then
+ printf "COMMAND: $cmd\n"
+ stderr=
+ fi
+
+ out=$(eval $cmd $stderr)
+ rc=$?
+ if [ "$VERBOSE" = "1" -a -n "$out" ]; then
+ echo " $out"
+ fi
+
+ return $rc
+}
+
+check_hv_connectivity() {
+ ip netns exec hv-1 ping -c 1 -W 1 $1 &>/dev/null
+ sleep 1
+ ip netns exec hv-1 ping -c 1 -W 1 $2 &>/dev/null
+
+ return $?
+}
+
+check_vm_connectivity() {
+ run_cmd "ip netns exec vm-11 ping -c 1 -W 1 10.0.10.12"
+ log_test $? 0 "VM connectivity over $1 (ipv4 default rdst)"
+
+ run_cmd "ip netns exec vm-21 ping -c 1 -W 1 10.0.10.22"
+ log_test $? 0 "VM connectivity over $1 (ipv6 default rdst)"
+}
+
+cleanup() {
+ ip link del veth-hv-1 2>/dev/null || true
+ ip link del vethhv-11 vethhv-12 vethhv-21 vethhv-22 2>/dev/null || true
+
+ for ns in hv-1 hv-2 vm-11 vm-21 vm-12 vm-22 vm-31 vm-32; do
+ ip netns del $ns 2>/dev/null || true
+ done
+}
+
+trap cleanup EXIT
+
+setup-hv-networking() {
+ hv=$1
+ local1=$2
+ mask1=$3
+ local2=$4
+ mask2=$5
+
+ ip netns add hv-$hv
+ ip link set veth-hv-$hv netns hv-$hv
+ ip -netns hv-$hv link set veth-hv-$hv name veth0
+ ip -netns hv-$hv addr add $local1/$mask1 dev veth0
+ ip -netns hv-$hv addr add $local2/$mask2 dev veth0
+ ip -netns hv-$hv link set veth0 up
+}
+
+# Setups a "VM" simulated by a netns an a veth pair
+# example: setup-vm <hvid> <vmid> <brid> <VATTRS> <mcast_for_bum>
+# VATTRS = comma separated "<vlan>-<v[46]>-<localip>-<remoteip>-<VTYPE>-<vxlandstport>"
+# VTYPE = vxlan device type. "default = traditional device, metadata = metadata device
+# vnifilter = vnifiltering device,
+# vnifilterg = vnifiltering device with per vni group/remote"
+# example:
+# setup-vm 1 11 1 \
+# 10-v4-172.16.0.1-239.1.1.100-vnifilterg,20-v4-172.16.0.1-239.1.1.100-vnifilterg 1
+#
+setup-vm() {
+ hvid=$1
+ vmid=$2
+ brid=$3
+ vattrs=$4
+ mcast=$5
+ lastvxlandev=""
+
+ # create bridge
+ ip -netns hv-$hvid link add br$brid type bridge vlan_filtering 1 vlan_default_pvid 0 \
+ mcast_snooping 0
+ ip -netns hv-$hvid link set br$brid up
+
+ # create vm namespace and interfaces and connect to hypervisor
+ # namespace
+ ip netns add vm-$vmid
+ hvvethif="vethhv-$vmid"
+ vmvethif="veth-$vmid"
+ ip link add $hvvethif type veth peer name $vmvethif
+ ip link set $hvvethif netns hv-$hvid
+ ip link set $vmvethif netns vm-$vmid
+ ip -netns hv-$hvid link set $hvvethif up
+ ip -netns vm-$vmid link set $vmvethif up
+ ip -netns hv-$hvid link set $hvvethif master br$brid
+
+ # configure VM vlan/vni filtering on hypervisor
+ for vmap in $(echo $vattrs | cut -d "," -f1- --output-delimiter=' ')
+ do
+ local vid=$(echo $vmap | awk -F'-' '{print ($1)}')
+ local family=$(echo $vmap | awk -F'-' '{print ($2)}')
+ local localip=$(echo $vmap | awk -F'-' '{print ($3)}')
+ local group=$(echo $vmap | awk -F'-' '{print ($4)}')
+ local vtype=$(echo $vmap | awk -F'-' '{print ($5)}')
+ local port=$(echo $vmap | awk -F'-' '{print ($6)}')
+
+ ip -netns vm-$vmid link add name $vmvethif.$vid link $vmvethif type vlan id $vid
+ ip -netns vm-$vmid addr add 10.0.$vid.$vmid/24 dev $vmvethif.$vid
+ ip -netns vm-$vmid link set $vmvethif.$vid up
+
+ tid=$vid
+ vxlandev="vxlan$brid"
+ vxlandevflags=""
+
+ if [[ -n $vtype && $vtype == "metadata" ]]; then
+ vxlandevflags="$vxlandevflags external"
+ elif [[ -n $vtype && $vtype == "vnifilter" || $vtype == "vnifilterg" ]]; then
+ vxlandevflags="$vxlandevflags external vnifilter"
+ tid=$((vid+brid))
+ else
+ vxlandevflags="$vxlandevflags id $tid"
+ vxlandev="vxlan$tid"
+ fi
+
+ if [[ -n $vtype && $vtype != "vnifilterg" ]]; then
+ if [[ -n "$group" && "$group" != "null" ]]; then
+ if [ $mcast -eq 1 ]; then
+ vxlandevflags="$vxlandevflags group $group"
+ else
+ vxlandevflags="$vxlandevflags remote $group"
+ fi
+ fi
+ fi
+
+ if [[ -n "$port" && "$port" != "default" ]]; then
+ vxlandevflags="$vxlandevflags dstport $port"
+ fi
+
+ # create vxlan device
+ if [ "$vxlandev" != "$lastvxlandev" ]; then
+ ip -netns hv-$hvid link add $vxlandev type vxlan local $localip $vxlandevflags dev veth0 2>/dev/null
+ ip -netns hv-$hvid link set $vxlandev master br$brid
+ ip -netns hv-$hvid link set $vxlandev up
+ lastvxlandev=$vxlandev
+ fi
+
+ # add vlan
+ bridge -netns hv-$hvid vlan add vid $vid dev $hvvethif
+ bridge -netns hv-$hvid vlan add vid $vid pvid dev $vxlandev
+
+ # Add bridge vni filter for tx
+ if [[ -n $vtype && $vtype == "metadata" || $vtype == "vnifilter" || $vtype == "vnifilterg" ]]; then
+ bridge -netns hv-$hvid link set dev $vxlandev vlan_tunnel on
+ bridge -netns hv-$hvid vlan add dev $vxlandev vid $vid tunnel_info id $tid
+ fi
+
+ if [[ -n $vtype && $vtype == "metadata" ]]; then
+ bridge -netns hv-$hvid fdb add 00:00:00:00:00:00 dev $vxlandev \
+ src_vni $tid vni $tid dst $group self
+ elif [[ -n $vtype && $vtype == "vnifilter" ]]; then
+ # Add per vni rx filter with 'bridge vni' api
+ bridge -netns hv-$hvid vni add dev $vxlandev vni $tid
+ elif [[ -n $vtype && $vtype == "vnifilterg" ]]; then
+ # Add per vni group config with 'bridge vni' api
+ if [ -n "$group" ]; then
+ if [ "$family" == "v4" ]; then
+ if [ $mcast -eq 1 ]; then
+ bridge -netns hv-$hvid vni add dev $vxlandev vni $tid group $group
+ else
+ bridge -netns hv-$hvid vni add dev $vxlandev vni $tid remote $group
+ fi
+ else
+ if [ $mcast -eq 1 ]; then
+ bridge -netns hv-$hvid vni add dev $vxlandev vni $tid group6 $group
+ else
+ bridge -netns hv-$hvid vni add dev $vxlandev vni $tid remote6 $group
+ fi
+ fi
+ fi
+ fi
+ done
+}
+
+setup_vnifilter_api()
+{
+ ip link add veth-host type veth peer name veth-testns
+ ip netns add testns
+ ip link set veth-testns netns testns
+}
+
+cleanup_vnifilter_api()
+{
+ ip link del veth-host 2>/dev/null || true
+ ip netns del testns 2>/dev/null || true
+}
+
+# tests vxlan filtering api
+vxlan_vnifilter_api()
+{
+ hv1addr1="172.16.0.1"
+ hv2addr1="172.16.0.2"
+ hv1addr2="2002:fee1::1"
+ hv2addr2="2002:fee1::2"
+ localip="172.16.0.1"
+ group="239.1.1.101"
+
+ cleanup_vnifilter_api &>/dev/null
+ setup_vnifilter_api
+
+ # Duplicate vni test
+ # create non-vnifiltering traditional vni device
+ run_cmd "ip -netns testns link add vxlan100 type vxlan id 100 local $localip dev veth-testns dstport 4789"
+ log_test $? 0 "Create traditional vxlan device"
+
+ # create vni filtering device
+ run_cmd "ip -netns testns link add vxlan-ext1 type vxlan vnifilter local $localip dev veth-testns dstport 4789"
+ log_test $? 1 "Cannot create vnifilter device without external flag"
+
+ run_cmd "ip -netns testns link add vxlan-ext1 type vxlan external vnifilter local $localip dev veth-testns dstport 4789"
+ log_test $? 0 "Creating external vxlan device with vnifilter flag"
+
+ run_cmd "bridge -netns testns vni add dev vxlan-ext1 vni 100"
+ log_test $? 0 "Cannot set in-use vni id on vnifiltering device"
+
+ run_cmd "bridge -netns testns vni add dev vxlan-ext1 vni 200"
+ log_test $? 0 "Set new vni id on vnifiltering device"
+
+ run_cmd "ip -netns testns link add vxlan-ext2 type vxlan external vnifilter local $localip dev veth-testns dstport 4789"
+ log_test $? 0 "Create second external vxlan device with vnifilter flag"
+
+ run_cmd "bridge -netns testns vni add dev vxlan-ext2 vni 200"
+ log_test $? 255 "Cannot set in-use vni id on vnifiltering device"
+
+ run_cmd "bridge -netns testns vni add dev vxlan-ext2 vni 300"
+ log_test $? 0 "Set new vni id on vnifiltering device"
+
+ # check in bridge vni show
+ run_cmd "bridge -netns testns vni add dev vxlan-ext2 vni 300"
+ log_test $? 0 "Update vni id on vnifiltering device"
+
+ run_cmd "bridge -netns testns vni add dev vxlan-ext2 vni 400"
+ log_test $? 0 "Add new vni id on vnifiltering device"
+
+ # add multicast group per vni
+ run_cmd "bridge -netns testns vni add dev vxlan-ext1 vni 200 group $group"
+ log_test $? 0 "Set multicast group on existing vni"
+
+ # add multicast group per vni
+ run_cmd "bridge -netns testns vni add dev vxlan-ext2 vni 300 group $group"
+ log_test $? 0 "Set multicast group on existing vni"
+
+ # set vnifilter on an existing external vxlan device
+ run_cmd "ip -netns testns link set dev vxlan-ext1 type vxlan external vnifilter"
+ log_test $? 2 "Cannot set vnifilter flag on a device"
+
+ # change vxlan vnifilter flag
+ run_cmd "ip -netns testns link set dev vxlan-ext1 type vxlan external novnifilter"
+ log_test $? 2 "Cannot unset vnifilter flag on a device"
+}
+
+# Sanity test vnifilter datapath
+# vnifilter vnis inherit BUM group from
+# vxlan device
+vxlan_vnifilter_datapath()
+{
+ hv1addr1="172.16.0.1"
+ hv2addr1="172.16.0.2"
+ hv1addr2="2002:fee1::1"
+ hv2addr2="2002:fee1::2"
+
+ ip link add veth-hv-1 type veth peer name veth-hv-2
+ setup-hv-networking 1 $hv1addr1 24 $hv1addr2 64 $hv2addr1 $hv2addr2
+ setup-hv-networking 2 $hv2addr1 24 $hv2addr2 64 $hv1addr1 $hv1addr2
+
+ check_hv_connectivity hv2addr1 hv2addr2
+
+ setup-vm 1 11 1 10-v4-$hv1addr1-$hv2addr1-vnifilter,20-v4-$hv1addr1-$hv2addr1-vnifilter 0
+ setup-vm 1 21 2 10-v6-$hv1addr2-$hv2addr2-vnifilter,20-v6-$hv1addr2-$hv2addr2-vnifilter 0
+
+ setup-vm 2 12 1 10-v4-$hv2addr1-$hv1addr1-vnifilter,20-v4-$hv2addr1-$hv1addr1-vnifilter 0
+ setup-vm 2 22 2 10-v6-$hv2addr2-$hv1addr2-vnifilter,20-v6-$hv2addr2-$hv1addr2-vnifilter 0
+
+ check_vm_connectivity "vnifiltering vxlan"
+}
+
+# Sanity test vnifilter datapath
+# with vnifilter per vni configured BUM
+# group/remote
+vxlan_vnifilter_datapath_pervni()
+{
+ hv1addr1="172.16.0.1"
+ hv2addr1="172.16.0.2"
+ hv1addr2="2002:fee1::1"
+ hv2addr2="2002:fee1::2"
+
+ ip link add veth-hv-1 type veth peer name veth-hv-2
+ setup-hv-networking 1 $hv1addr1 24 $hv1addr2 64
+ setup-hv-networking 2 $hv2addr1 24 $hv2addr2 64
+
+ check_hv_connectivity hv2addr1 hv2addr2
+
+ setup-vm 1 11 1 10-v4-$hv1addr1-$hv2addr1-vnifilterg,20-v4-$hv1addr1-$hv2addr1-vnifilterg 0
+ setup-vm 1 21 2 10-v6-$hv1addr2-$hv2addr2-vnifilterg,20-v6-$hv1addr2-$hv2addr2-vnifilterg 0
+
+ setup-vm 2 12 1 10-v4-$hv2addr1-$hv1addr1-vnifilterg,20-v4-$hv2addr1-$hv1addr1-vnifilterg 0
+ setup-vm 2 22 2 10-v6-$hv2addr2-$hv1addr2-vnifilterg,20-v6-$hv2addr2-$hv1addr2-vnifilterg 0
+
+ check_vm_connectivity "vnifiltering vxlan pervni remote"
+}
+
+
+vxlan_vnifilter_datapath_mgroup()
+{
+ hv1addr1="172.16.0.1"
+ hv2addr1="172.16.0.2"
+ hv1addr2="2002:fee1::1"
+ hv2addr2="2002:fee1::2"
+ group="239.1.1.100"
+ group6="ff07::1"
+
+ ip link add veth-hv-1 type veth peer name veth-hv-2
+ setup-hv-networking 1 $hv1addr1 24 $hv1addr2 64
+ setup-hv-networking 2 $hv2addr1 24 $hv2addr2 64
+
+ check_hv_connectivity hv2addr1 hv2addr2
+
+ setup-vm 1 11 1 10-v4-$hv1addr1-$group-vnifilter,20-v4-$hv1addr1-$group-vnifilter 1
+ setup-vm 1 21 2 "10-v6-$hv1addr2-$group6-vnifilter,20-v6-$hv1addr2-$group6-vnifilter" 1
+
+ setup-vm 2 12 1 10-v4-$hv2addr1-$group-vnifilter,20-v4-$hv2addr1-$group-vnifilter 1
+ setup-vm 2 22 2 10-v6-$hv2addr2-$group6-vnifilter,20-v6-$hv2addr2-$group6-vnifilter 1
+
+ check_vm_connectivity "vnifiltering vxlan mgroup"
+}
+
+vxlan_vnifilter_datapath_mgroup_pervni()
+{
+ hv1addr1="172.16.0.1"
+ hv2addr1="172.16.0.2"
+ hv1addr2="2002:fee1::1"
+ hv2addr2="2002:fee1::2"
+ group="239.1.1.100"
+ group6="ff07::1"
+
+ ip link add veth-hv-1 type veth peer name veth-hv-2
+ setup-hv-networking 1 $hv1addr1 24 $hv1addr2 64
+ setup-hv-networking 2 $hv2addr1 24 $hv2addr2 64
+
+ check_hv_connectivity hv2addr1 hv2addr2
+
+ setup-vm 1 11 1 10-v4-$hv1addr1-$group-vnifilterg,20-v4-$hv1addr1-$group-vnifilterg 1
+ setup-vm 1 21 2 10-v6-$hv1addr2-$group6-vnifilterg,20-v6-$hv1addr2-$group6-vnifilterg 1
+
+ setup-vm 2 12 1 10-v4-$hv2addr1-$group-vnifilterg,20-v4-$hv2addr1-$group-vnifilterg 1
+ setup-vm 2 22 2 10-v6-$hv2addr2-$group6-vnifilterg,20-v6-$hv2addr2-$group6-vnifilterg 1
+
+ check_vm_connectivity "vnifiltering vxlan pervni mgroup"
+}
+
+vxlan_vnifilter_metadata_and_traditional_mix()
+{
+ hv1addr1="172.16.0.1"
+ hv2addr1="172.16.0.2"
+ hv1addr2="2002:fee1::1"
+ hv2addr2="2002:fee1::2"
+
+ ip link add veth-hv-1 type veth peer name veth-hv-2
+ setup-hv-networking 1 $hv1addr1 24 $hv1addr2 64
+ setup-hv-networking 2 $hv2addr1 24 $hv2addr2 64
+
+ check_hv_connectivity hv2addr1 hv2addr2
+
+ setup-vm 1 11 1 10-v4-$hv1addr1-$hv2addr1-vnifilter,20-v4-$hv1addr1-$hv2addr1-vnifilter 0
+ setup-vm 1 21 2 10-v6-$hv1addr2-$hv2addr2-vnifilter,20-v6-$hv1addr2-$hv2addr2-vnifilter 0
+ setup-vm 1 31 3 30-v4-$hv1addr1-$hv2addr1-default-4790,40-v6-$hv1addr2-$hv2addr2-default-4790,50-v4-$hv1addr1-$hv2addr1-metadata-4791 0
+
+
+ setup-vm 2 12 1 10-v4-$hv2addr1-$hv1addr1-vnifilter,20-v4-$hv2addr1-$hv1addr1-vnifilter 0
+ setup-vm 2 22 2 10-v6-$hv2addr2-$hv1addr2-vnifilter,20-v6-$hv2addr2-$hv1addr2-vnifilter 0
+ setup-vm 2 32 3 30-v4-$hv2addr1-$hv1addr1-default-4790,40-v6-$hv2addr2-$hv1addr2-default-4790,50-v4-$hv2addr1-$hv1addr1-metadata-4791 0
+
+ check_vm_connectivity "vnifiltering vxlan pervni remote mix"
+
+ # check VM connectivity over traditional/non-vxlan filtering vxlan devices
+ run_cmd "ip netns exec vm-31 ping -c 1 -W 1 10.0.30.32"
+ log_test $? 0 "VM connectivity over traditional vxlan (ipv4 default rdst)"
+
+ run_cmd "ip netns exec vm-31 ping -c 1 -W 1 10.0.40.32"
+ log_test $? 0 "VM connectivity over traditional vxlan (ipv6 default rdst)"
+
+ run_cmd "ip netns exec vm-31 ping -c 1 -W 1 10.0.50.32"
+ log_test $? 0 "VM connectivity over metadata nonfiltering vxlan (ipv4 default rdst)"
+}
+
+while getopts :t:pP46hv o
+do
+ case $o in
+ t) TESTS=$OPTARG;;
+ p) PAUSE_ON_FAIL=yes;;
+ P) PAUSE=yes;;
+ v) VERBOSE=$(($VERBOSE + 1));;
+ h) usage; exit 0;;
+ *) usage; exit 1;;
+ esac
+done
+
+# make sure we don't pause twice
+[ "${PAUSE}" = "yes" ] && PAUSE_ON_FAIL=no
+
+if [ "$(id -u)" -ne 0 ];then
+ echo "SKIP: Need root privileges"
+ exit $ksft_skip;
+fi
+
+if [ ! -x "$(command -v ip)" ]; then
+ echo "SKIP: Could not run test without ip tool"
+ exit $ksft_skip
+fi
+
+ip link help vxlan 2>&1 | grep -q "vnifilter"
+if [ $? -ne 0 ]; then
+ echo "SKIP: iproute2 too old, missing vxlan dev vnifilter setting"
+ sync
+ exit $ksft_skip
+fi
+
+bridge vni help 2>&1 | grep -q "Usage: bridge vni"
+if [ $? -ne 0 ]; then
+ echo "SKIP: iproute2 bridge lacks vxlan vnifiltering support"
+ exit $ksft_skip
+fi
+
+# start clean
+cleanup &> /dev/null
+
+for t in $TESTS
+do
+ case $t in
+ none) setup; exit 0;;
+ *) $t; cleanup;;
+ esac
+done
+
+if [ "$TESTS" != "none" ]; then
+ printf "\nTests passed: %3d\n" ${nsuccess}
+ printf "Tests failed: %3d\n" ${nfail}
+fi
+
+exit $ret
--
2.25.1
Powered by blists - more mailing lists