| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 23 Feb 2022 23:43:27 +0100
From: Marc Kleine-Budde <mkl@...gutronix.de>
To: netdev@...r.kernel.org
Cc: davem@...emloft.net, kuba@...nel.org, linux-can@...r.kernel.org,
kernel@...gutronix.de, Marc Kleine-Budde <mkl@...gutronix.de>
Subject: [PATCH net-next 31/36] can: mcp251xfd: ring: prepare to change order of TX and RX FIFOs
This patch improves the initialization of the TX and RX rings. The
initialization functions are now called with pointers to the next free
address (in the on chip RAM) and next free hardware FIFO. The rings
are initialized using these values and the pointers are modified to
point to the next free elements.
This means the order of the mcp251xfd_ring_init_*() functions
specifies the order of the rings in the hardware FIFO. This makes it
possible to change the order of the TX and RX FIFOs, which is done in
the next patch.
This gives the opportunity to minimize the number of SPI transfers in
the IRQ handler. The read of the IRQ status register and RX FIFO
status registers can be combined into single SPI transfer. If the RX
ring uses FIFO 1, the overall length of the transfer is smaller than
in the original layout, where the RX FIFO comes after the TX FIFO.
Link: https://lore.kernel.org/all/20220217103826.2299157-4-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@...gutronix.de>
---
.../net/can/spi/mcp251xfd/mcp251xfd-ring.c | 47 ++++++++++---------
drivers/net/can/spi/mcp251xfd/mcp251xfd.h | 2 -
2 files changed, 25 insertions(+), 24 deletions(-)
diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-ring.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-ring.c
index b9300554543e..39005725c665 100644
--- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-ring.c
+++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-ring.c
@@ -52,7 +52,8 @@ mcp251xfd_cmd_prepare_write_reg(const struct mcp251xfd_priv *priv,
return len;
}
-static void mcp251xfd_ring_init_tef(struct mcp251xfd_priv *priv)
+static void
+mcp251xfd_ring_init_tef(struct mcp251xfd_priv *priv, u16 *base)
{
struct mcp251xfd_tef_ring *tef_ring;
struct spi_transfer *xfer;
@@ -66,6 +67,9 @@ static void mcp251xfd_ring_init_tef(struct mcp251xfd_priv *priv)
tef_ring->head = 0;
tef_ring->tail = 0;
+ /* TEF- and TX-FIFO have same number of objects */
+ *base = mcp251xfd_get_tef_obj_addr(priv->tx->obj_num);
+
/* FIFO increment TEF tail pointer */
addr = MCP251XFD_REG_TEFCON;
val = MCP251XFD_REG_TEFCON_UINC;
@@ -127,7 +131,8 @@ mcp251xfd_tx_ring_init_tx_obj(const struct mcp251xfd_priv *priv,
ARRAY_SIZE(tx_obj->xfer));
}
-static void mcp251xfd_ring_init_tx(struct mcp251xfd_priv *priv)
+static void
+mcp251xfd_ring_init_tx(struct mcp251xfd_priv *priv, u16 *base, u8 *fifo_nr)
{
struct mcp251xfd_tx_ring *tx_ring;
struct mcp251xfd_tx_obj *tx_obj;
@@ -139,9 +144,12 @@ static void mcp251xfd_ring_init_tx(struct mcp251xfd_priv *priv)
tx_ring = priv->tx;
tx_ring->head = 0;
tx_ring->tail = 0;
- tx_ring->base = mcp251xfd_get_tef_obj_addr(tx_ring->obj_num);
+ tx_ring->base = *base;
tx_ring->nr = 0;
- tx_ring->fifo_nr = MCP251XFD_TX_FIFO;
+ tx_ring->fifo_nr = *fifo_nr;
+
+ *base = mcp251xfd_get_tx_obj_addr(tx_ring, tx_ring->obj_num);
+ *fifo_nr += 1;
/* FIFO request to send */
addr = MCP251XFD_REG_FIFOCON(tx_ring->fifo_nr);
@@ -153,33 +161,25 @@ static void mcp251xfd_ring_init_tx(struct mcp251xfd_priv *priv)
mcp251xfd_tx_ring_init_tx_obj(priv, tx_ring, tx_obj, len, i);
}
-static void mcp251xfd_ring_init_rx(struct mcp251xfd_priv *priv)
+static void
+mcp251xfd_ring_init_rx(struct mcp251xfd_priv *priv, u16 *base, u8 *fifo_nr)
{
- struct mcp251xfd_rx_ring *rx_ring, *prev_rx_ring = NULL;
- struct mcp251xfd_tx_ring *tx_ring;
+ struct mcp251xfd_rx_ring *rx_ring;
struct spi_transfer *xfer;
u32 val;
u16 addr;
u8 len;
int i, j;
- tx_ring = priv->tx;
mcp251xfd_for_each_rx_ring(priv, rx_ring, i) {
rx_ring->head = 0;
rx_ring->tail = 0;
+ rx_ring->base = *base;
rx_ring->nr = i;
- rx_ring->fifo_nr = MCP251XFD_RX_FIFO(i);
+ rx_ring->fifo_nr = *fifo_nr;
- if (!prev_rx_ring)
- rx_ring->base =
- mcp251xfd_get_tx_obj_addr(tx_ring,
- tx_ring->obj_num);
- else
- rx_ring->base = prev_rx_ring->base +
- prev_rx_ring->obj_size *
- prev_rx_ring->obj_num;
-
- prev_rx_ring = rx_ring;
+ *base = mcp251xfd_get_rx_obj_addr(rx_ring, rx_ring->obj_num);
+ *fifo_nr += 1;
/* FIFO increment RX tail pointer */
addr = MCP251XFD_REG_FIFOCON(rx_ring->fifo_nr);
@@ -209,11 +209,14 @@ static void mcp251xfd_ring_init_rx(struct mcp251xfd_priv *priv)
void mcp251xfd_ring_init(struct mcp251xfd_priv *priv)
{
+ u16 base = 0;
+ u8 fifo_nr = 1;
+
netdev_reset_queue(priv->ndev);
- mcp251xfd_ring_init_tef(priv);
- mcp251xfd_ring_init_tx(priv);
- mcp251xfd_ring_init_rx(priv);
+ mcp251xfd_ring_init_tef(priv, &base);
+ mcp251xfd_ring_init_tx(priv, &base, &fifo_nr);
+ mcp251xfd_ring_init_rx(priv, &base, &fifo_nr);
}
void mcp251xfd_ring_free(struct mcp251xfd_priv *priv)
diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd.h b/drivers/net/can/spi/mcp251xfd/mcp251xfd.h
index 12d3f2b84c0a..5c3f7f25caf0 100644
--- a/drivers/net/can/spi/mcp251xfd/mcp251xfd.h
+++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd.h
@@ -383,8 +383,6 @@
#endif
#define MCP251XFD_NAPI_WEIGHT 32
-#define MCP251XFD_TX_FIFO 1
-#define MCP251XFD_RX_FIFO(x) (MCP251XFD_TX_FIFO + 1 + (x))
/* SPI commands */
#define MCP251XFD_SPI_INSTRUCTION_RESET 0x0000
--
2.34.1
Powered by blists - more mailing lists