| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220223031436.124858-3-guoheyi@linux.alibaba.com>
Date: Wed, 23 Feb 2022 11:14:35 +0800
From: Heyi Guo <guoheyi@...ux.alibaba.com>
To: linux-kernel@...r.kernel.org
Cc: Heyi Guo <guoheyi@...ux.alibaba.com>, Andrew Lunn <andrew@...n.ch>,
"David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Joel Stanley <joel@....id.au>,
Guangbin Huang <huangguangbin2@...wei.com>,
Hao Chen <chenhao288@...ilicon.com>,
Arnd Bergmann <arnd@...db.de>,
Dylan Hung <dylan_hung@...eedtech.com>, netdev@...r.kernel.org
Subject: [PATCH 2/3] drivers/net/ftgmac100: adjust code place for function call dependency
This is to prepare for ftgmac100_adjust_link() to call
ftgmac100_reset() directly. Only code places are changed.
Signed-off-by: Heyi Guo <guoheyi@...ux.alibaba.com>
---
Cc: Andrew Lunn <andrew@...n.ch>
Cc: "David S. Miller" <davem@...emloft.net>
Cc: Jakub Kicinski <kuba@...nel.org>
Cc: Joel Stanley <joel@....id.au>
Cc: Guangbin Huang <huangguangbin2@...wei.com>
Cc: Hao Chen <chenhao288@...ilicon.com>
Cc: Arnd Bergmann <arnd@...db.de>
Cc: Dylan Hung <dylan_hung@...eedtech.com>
Cc: netdev@...r.kernel.org
---
drivers/net/ethernet/faraday/ftgmac100.c | 222 +++++++++++------------
1 file changed, 111 insertions(+), 111 deletions(-)
diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index 1f3eb44314753..c1deb6e5d26c5 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -989,117 +989,6 @@ static int ftgmac100_alloc_rx_buffers(struct ftgmac100 *priv)
return 0;
}
-static void ftgmac100_adjust_link(struct net_device *netdev)
-{
- struct ftgmac100 *priv = netdev_priv(netdev);
- struct phy_device *phydev = netdev->phydev;
- bool tx_pause, rx_pause;
- int new_speed;
-
- /* We store "no link" as speed 0 */
- if (!phydev->link)
- new_speed = 0;
- else
- new_speed = phydev->speed;
-
- /* Grab pause settings from PHY if configured to do so */
- if (priv->aneg_pause) {
- rx_pause = tx_pause = phydev->pause;
- if (phydev->asym_pause)
- tx_pause = !rx_pause;
- } else {
- rx_pause = priv->rx_pause;
- tx_pause = priv->tx_pause;
- }
-
- /* Link hasn't changed, do nothing */
- if (phydev->speed == priv->cur_speed &&
- phydev->duplex == priv->cur_duplex &&
- rx_pause == priv->rx_pause &&
- tx_pause == priv->tx_pause)
- return;
-
- /* Print status if we have a link or we had one and just lost it,
- * don't print otherwise.
- */
- if (new_speed || priv->cur_speed)
- phy_print_status(phydev);
-
- priv->cur_speed = new_speed;
- priv->cur_duplex = phydev->duplex;
- priv->rx_pause = rx_pause;
- priv->tx_pause = tx_pause;
-
- /* Link is down, do nothing else */
- if (!new_speed)
- return;
-
- /* Disable all interrupts */
- iowrite32(0, priv->base + FTGMAC100_OFFSET_IER);
-
- /* Reset the adapter asynchronously */
- schedule_work(&priv->reset_task);
-}
-
-static int ftgmac100_mii_probe(struct net_device *netdev)
-{
- struct ftgmac100 *priv = netdev_priv(netdev);
- struct platform_device *pdev = to_platform_device(priv->dev);
- struct device_node *np = pdev->dev.of_node;
- struct phy_device *phydev;
- phy_interface_t phy_intf;
- int err;
-
- /* Default to RGMII. It's a gigabit part after all */
- err = of_get_phy_mode(np, &phy_intf);
- if (err)
- phy_intf = PHY_INTERFACE_MODE_RGMII;
-
- /* Aspeed only supports these. I don't know about other IP
- * block vendors so I'm going to just let them through for
- * now. Note that this is only a warning if for some obscure
- * reason the DT really means to lie about it or it's a newer
- * part we don't know about.
- *
- * On the Aspeed SoC there are additionally straps and SCU
- * control bits that could tell us what the interface is
- * (or allow us to configure it while the IP block is held
- * in reset). For now I chose to keep this driver away from
- * those SoC specific bits and assume the device-tree is
- * right and the SCU has been configured properly by pinmux
- * or the firmware.
- */
- if (priv->is_aspeed && !(phy_interface_mode_is_rgmii(phy_intf))) {
- netdev_warn(netdev,
- "Unsupported PHY mode %s !\n",
- phy_modes(phy_intf));
- }
-
- phydev = phy_find_first(priv->mii_bus);
- if (!phydev) {
- netdev_info(netdev, "%s: no PHY found\n", netdev->name);
- return -ENODEV;
- }
-
- phydev = phy_connect(netdev, phydev_name(phydev),
- &ftgmac100_adjust_link, phy_intf);
-
- if (IS_ERR(phydev)) {
- netdev_err(netdev, "%s: Could not attach to PHY\n", netdev->name);
- return PTR_ERR(phydev);
- }
-
- /* Indicate that we support PAUSE frames (see comment in
- * Documentation/networking/phy.rst)
- */
- phy_support_asym_pause(phydev);
-
- /* Display what we found */
- phy_attached_info(phydev);
-
- return 0;
-}
-
static int ftgmac100_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
{
struct net_device *netdev = bus->priv;
@@ -1465,6 +1354,117 @@ static void ftgmac100_reset_task(struct work_struct *work)
ftgmac100_reset(priv);
}
+static void ftgmac100_adjust_link(struct net_device *netdev)
+{
+ struct ftgmac100 *priv = netdev_priv(netdev);
+ struct phy_device *phydev = netdev->phydev;
+ bool tx_pause, rx_pause;
+ int new_speed;
+
+ /* We store "no link" as speed 0 */
+ if (!phydev->link)
+ new_speed = 0;
+ else
+ new_speed = phydev->speed;
+
+ /* Grab pause settings from PHY if configured to do so */
+ if (priv->aneg_pause) {
+ rx_pause = tx_pause = phydev->pause;
+ if (phydev->asym_pause)
+ tx_pause = !rx_pause;
+ } else {
+ rx_pause = priv->rx_pause;
+ tx_pause = priv->tx_pause;
+ }
+
+ /* Link hasn't changed, do nothing */
+ if (phydev->speed == priv->cur_speed &&
+ phydev->duplex == priv->cur_duplex &&
+ rx_pause == priv->rx_pause &&
+ tx_pause == priv->tx_pause)
+ return;
+
+ /* Print status if we have a link or we had one and just lost it,
+ * don't print otherwise.
+ */
+ if (new_speed || priv->cur_speed)
+ phy_print_status(phydev);
+
+ priv->cur_speed = new_speed;
+ priv->cur_duplex = phydev->duplex;
+ priv->rx_pause = rx_pause;
+ priv->tx_pause = tx_pause;
+
+ /* Link is down, do nothing else */
+ if (!new_speed)
+ return;
+
+ /* Disable all interrupts */
+ iowrite32(0, priv->base + FTGMAC100_OFFSET_IER);
+
+ /* Reset the adapter asynchronously */
+ schedule_work(&priv->reset_task);
+}
+
+static int ftgmac100_mii_probe(struct net_device *netdev)
+{
+ struct ftgmac100 *priv = netdev_priv(netdev);
+ struct platform_device *pdev = to_platform_device(priv->dev);
+ struct device_node *np = pdev->dev.of_node;
+ struct phy_device *phydev;
+ phy_interface_t phy_intf;
+ int err;
+
+ /* Default to RGMII. It's a gigabit part after all */
+ err = of_get_phy_mode(np, &phy_intf);
+ if (err)
+ phy_intf = PHY_INTERFACE_MODE_RGMII;
+
+ /* Aspeed only supports these. I don't know about other IP
+ * block vendors so I'm going to just let them through for
+ * now. Note that this is only a warning if for some obscure
+ * reason the DT really means to lie about it or it's a newer
+ * part we don't know about.
+ *
+ * On the Aspeed SoC there are additionally straps and SCU
+ * control bits that could tell us what the interface is
+ * (or allow us to configure it while the IP block is held
+ * in reset). For now I chose to keep this driver away from
+ * those SoC specific bits and assume the device-tree is
+ * right and the SCU has been configured properly by pinmux
+ * or the firmware.
+ */
+ if (priv->is_aspeed && !(phy_interface_mode_is_rgmii(phy_intf))) {
+ netdev_warn(netdev,
+ "Unsupported PHY mode %s !\n",
+ phy_modes(phy_intf));
+ }
+
+ phydev = phy_find_first(priv->mii_bus);
+ if (!phydev) {
+ netdev_info(netdev, "%s: no PHY found\n", netdev->name);
+ return -ENODEV;
+ }
+
+ phydev = phy_connect(netdev, phydev_name(phydev),
+ &ftgmac100_adjust_link, phy_intf);
+
+ if (IS_ERR(phydev)) {
+ netdev_err(netdev, "%s: Could not attach to PHY\n", netdev->name);
+ return PTR_ERR(phydev);
+ }
+
+ /* Indicate that we support PAUSE frames (see comment in
+ * Documentation/networking/phy.rst)
+ */
+ phy_support_asym_pause(phydev);
+
+ /* Display what we found */
+ phy_attached_info(phydev);
+
+ return 0;
+}
+
static int ftgmac100_open(struct net_device *netdev)
{
struct ftgmac100 *priv = netdev_priv(netdev);
--
2.17.1
Powered by blists - more mailing lists