netdev - [PATCH RFC net-next 1/6] net: dsa: sja1105: populate supported

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <E1nNGlv-00AOid-Vd@rmk-PC.armlinux.org.uk>
Date:   Thu, 24 Feb 2022 16:15:15 +0000
From:   "Russell King (Oracle)" <rmk+kernel@...linux.org.uk>
To:     Vladimir Oltean <olteanv@...il.com>
Cc:     Marek Beh__n <kabel@...nel.org>, Andrew Lunn <andrew@...n.ch>,
        Vivien Didelot <vivien.didelot@...il.com>,
        Florian Fainelli <f.fainelli@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>, netdev@...r.kernel.org
Subject: [PATCH RFC net-next 1/6] net: dsa: sja1105: populate
 supported_interfaces

Populate the supported interfaces bitmap for the SJA1105 DSA switch.

This switch only supports a static model of configuration, so we
restrict the interface modes to the configured setting.

Signed-off-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
---
 drivers/net/dsa/sja1105/sja1105_main.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index b513713be610..90e73a982faf 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -1412,6 +1412,18 @@ static void sja1105_mac_link_up(struct dsa_switch *ds, int port,
 	sja1105_inhibit_tx(priv, BIT(port), false);
 }
 
+static void sja1105_phylink_get_caps(struct dsa_switch *ds, int port,
+				     struct phylink_config *config)
+{
+	struct sja1105_private *priv = ds->priv;
+
+	/* The SJA1105 MAC programming model is through the static config
+	 * (the xMII Mode table cannot be dynamically reconfigured), and
+	 * we have to program that early.
+	 */
+	__set_bit(priv->phy_mode[port], config->supported_interfaces);
+}
+
 static void sja1105_phylink_validate(struct dsa_switch *ds, int port,
 				     unsigned long *supported,
 				     struct phylink_link_state *state)
@@ -3152,6 +3164,7 @@ static const struct dsa_switch_ops sja1105_switch_ops = {
 	.set_ageing_time	= sja1105_set_ageing_time,
 	.port_change_mtu	= sja1105_change_mtu,
 	.port_max_mtu		= sja1105_get_max_mtu,
+	.phylink_get_caps	= sja1105_phylink_get_caps,
 	.phylink_validate	= sja1105_phylink_validate,
 	.phylink_mac_config	= sja1105_mac_config,
 	.phylink_mac_link_up	= sja1105_mac_link_up,
-- 
2.30.2