[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220225101516.mhafzkt3mlgmdafc@wse-c0155>
Date: Fri, 25 Feb 2022 11:15:16 +0100
From: Casper Andersson <casper.casan@...il.com>
To: "David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Lars Povlsen <lars.povlsen@...rochip.com>,
Steen Hegelund <Steen.Hegelund@...rochip.com>,
UNGLinuxDriver@...rochip.com,
Bjarni Jonasson <bjarni.jonasson@...rochip.com>
Cc: netdev@...r.kernel.org
Subject: [PATCH net] net: sparx5: Fix add vlan when invalid operation
Check if operation is valid before changing any
settings in hardware. Otherwise it results in
changes being made despite it not being a valid
operation.
Fixes: 78eab33bb68b ("net: sparx5: add vlan support")
Signed-off-by: Casper Andersson <casper.casan@...il.com>
---
Maybe not obvious from the code changes, but the code is moved down
a couple lines to after check for if it tries to add a second untagged
VLAN to a port. Multiple untagged VLANs on a port is not allowed, but
the changes were made to the hardware anyways.
.../ethernet/microchip/sparx5/sparx5_vlan.c | 20 +++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_vlan.c b/drivers/net/ethernet/microchip/sparx5/sparx5_vlan.c
index 4ce490a25f33..8e56ffa1c4f7 100644
--- a/drivers/net/ethernet/microchip/sparx5/sparx5_vlan.c
+++ b/drivers/net/ethernet/microchip/sparx5/sparx5_vlan.c
@@ -58,16 +58,6 @@ int sparx5_vlan_vid_add(struct sparx5_port *port, u16 vid, bool pvid,
struct sparx5 *sparx5 = port->sparx5;
int ret;
- /* Make the port a member of the VLAN */
- set_bit(port->portno, sparx5->vlan_mask[vid]);
- ret = sparx5_vlant_set_mask(sparx5, vid);
- if (ret)
- return ret;
-
- /* Default ingress vlan classification */
- if (pvid)
- port->pvid = vid;
-
/* Untagged egress vlan classification */
if (untagged && port->vid != vid) {
if (port->vid) {
@@ -79,6 +69,16 @@ int sparx5_vlan_vid_add(struct sparx5_port *port, u16 vid, bool pvid,
port->vid = vid;
}
+ /* Make the port a member of the VLAN */
+ set_bit(port->portno, sparx5->vlan_mask[vid]);
+ ret = sparx5_vlant_set_mask(sparx5, vid);
+ if (ret)
+ return ret;
+
+ /* Default ingress vlan classification */
+ if (pvid)
+ port->pvid = vid;
+
sparx5_vlan_port_apply(sparx5, port);
return 0;
--
2.30.2
Powered by blists - more mailing lists