[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220302213459.6565-6-jonathan.lemon@gmail.com>
Date: Wed, 2 Mar 2022 13:34:59 -0800
From: Jonathan Lemon <jonathan.lemon@...il.com>
To: netdev@...r.kernel.org
Cc: richardcochran@...il.com, davem@...emloft.net, kuba@...nel.org,
kernel-team@...com
Subject: [PATCH net-next 5/5] docs: ABI: Document new timecard sysfs nodes.
Add documentation for the tod_correction, clock_status_drift,
and clock_status_offset nodes.
Signed-off-by: Jonathan Lemon <jonathan.lemon@...il.com>
---
Documentation/ABI/testing/sysfs-timecard | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/Documentation/ABI/testing/sysfs-timecard b/Documentation/ABI/testing/sysfs-timecard
index 97f6773794a5..5bf78486a469 100644
--- a/Documentation/ABI/testing/sysfs-timecard
+++ b/Documentation/ABI/testing/sysfs-timecard
@@ -63,6 +63,18 @@ Description: (RW) Contains the current synchronization source used by
the PHC. May be changed by writing one of the listed
values from the available_clock_sources attribute set.
+What: /sys/class/timecard/ocpN/clock_status_drift
+Date: March 2022
+Contact: Jonathan Lemon <jonathan.lemon@...il.com>
+Description: (RO) Contains the current drift value used by the firmware
+ for internal disciplining of the atomic clock.
+
+What: /sys/class/timecard/ocpN/clock_status_offset
+Date: March 2022
+Contact: Jonathan Lemon <jonathan.lemon@...il.com>
+Description: (RO) Contains the current offset value used by the firmware
+ for internal disciplining of the atomic clock.
+
What: /sys/class/timecard/ocpN/gnss_sync
Date: September 2021
Contact: Jonathan Lemon <jonathan.lemon@...il.com>
@@ -126,6 +138,16 @@ Description: (RW) These attributes specify the direction of the signal
The 10Mhz reference clock input is currently only valid
on SMA1 and may not be combined with other destination sinks.
+What: /sys/class/timecard/ocpN/tod_correction
+Date: March 2022
+Contact: Jonathan Lemon <jonathan.lemon@...il.com>
+Description: (RW) The incoming GNSS signal is in UTC time, and the NMEA
+ format messages do not provide a TAI offset. This sets the
+ correction value for the incoming time.
+
+ If UBX_LS is enabled, this should be 0, and the offset is
+ taken from the UBX-NAV-TIMELS message.
+
What: /sys/class/timecard/ocpN/ts_window_adjust
Date: September 2021
Contact: Jonathan Lemon <jonathan.lemon@...il.com>
--
2.31.1
Powered by blists - more mailing lists