Date:   Thu,  3 Mar 2022 15:38:00 -0800
From:   Jonathan Lemon <jonathan.lemon@...il.com>
To:     netdev@...r.kernel.org
Cc:     richardcochran@...il.com, davem@...emloft.net, kuba@...nel.org,
        kernel-team@...com
Subject: [PATCH net-next 1/2] ptp: ocp: add nvmem interface for accessing eeprom

Add the at24 drivers for the eeprom, and use those accessors
via the nvmem API instead of direct i2c accesses.  This makes
things cleaner.

Add an eeprom map table which specifies where the manufacturer
pre-defined information is located.  Retrieve this and export
this via the devlink interface.

Signed-off-by: Jonathan Lemon <jonathan.lemon@...il.com>
---
 drivers/ptp/ptp_ocp.c | 201 ++++++++++++++++++++++++++++--------------
 1 file changed, 133 insertions(+), 68 deletions(-)

diff --git a/drivers/ptp/ptp_ocp.c b/drivers/ptp/ptp_ocp.c
index 5e3e06acaf87..330a85cda1bd 100644
--- a/drivers/ptp/ptp_ocp.c
+++ b/drivers/ptp/ptp_ocp.c
@@ -11,12 +11,14 @@
 #include <linux/clkdev.h>
 #include <linux/clk-provider.h>
 #include <linux/platform_device.h>
+#include <linux/platform_data/i2c-xiic.h>
 #include <linux/ptp_clock_kernel.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/xilinx_spi.h>
 #include <net/devlink.h>
 #include <linux/i2c.h>
 #include <linux/mtd/mtd.h>
+#include <linux/nvmem-consumer.h>
 
 #ifndef PCI_VENDOR_ID_FACEBOOK
 #define PCI_VENDOR_ID_FACEBOOK 0x1d9b
@@ -204,6 +206,10 @@ struct ptp_ocp_ext_src {
 	int			irq_vec;
 };
 
+#define OCP_BOARD_MFR_LEN		8
+#define OCP_BOARD_ID_LEN		13
+#define OCP_SERIAL_LEN			6
+
 struct ptp_ocp {
 	struct pci_dev		*pdev;
 	struct device		dev;
@@ -230,6 +236,7 @@ struct ptp_ocp {
 	struct platform_device	*spi_flash;
 	struct clk_hw		*i2c_clk;
 	struct timer_list	watchdog;
+	const struct ptp_ocp_eeprom_map *eeprom_map;
 	struct dentry		*debug_root;
 	time64_t		gnss_lost;
 	int			id;
@@ -238,8 +245,10 @@ struct ptp_ocp {
 	int			gnss2_port;
 	int			mac_port;	/* miniature atomic clock */
 	int			nmea_port;
-	u8			serial[6];
-	bool			has_serial;
+	u8			board_mfr[OCP_BOARD_MFR_LEN];
+	u8			board_id[OCP_BOARD_ID_LEN];
+	u8			serial[OCP_SERIAL_LEN];
+	bool			has_eeprom_data;
 	u32			pps_req_map;
 	int			flash_start;
 	u32			utc_tai_offset;
@@ -268,6 +277,29 @@ static int ptp_ocp_fb_board_init(struct ptp_ocp *bp, struct ocp_resource *r);
 static irqreturn_t ptp_ocp_ts_irq(int irq, void *priv);
 static int ptp_ocp_ts_enable(void *priv, u32 req, bool enable);
 
+struct ptp_ocp_eeprom_map {
+	u16	off;
+	u16	len;
+	u32	bp_offset;
+	const void * const tag;
+};
+
+#define EEPROM_ENTRY(addr, member)				\
+	.off = addr,						\
+	.len = sizeof_field(struct ptp_ocp, member),		\
+	.bp_offset = offsetof(struct ptp_ocp, member)
+
+#define BP_MAP_ENTRY_ADDR(bp, map) ({				\
+	(void *)((uintptr_t)(bp) + (map)->bp_offset);		\
+})
+
+static struct ptp_ocp_eeprom_map fb_eeprom_map[] = {
+	{ EEPROM_ENTRY(0x43, board_id) },
+	{ EEPROM_ENTRY(0x79, board_mfr) },
+	{ EEPROM_ENTRY(0x00, serial), .tag = "mac" },
+	{ }
+};
+
 #define bp_assign_entry(bp, res, val) ({				\
 	uintptr_t addr = (uintptr_t)(bp) + (res)->bp_offset;		\
 	*(typeof(val) *)addr = val;					\
@@ -396,6 +428,15 @@ static struct ocp_resource ocp_fb_resource[] = {
 		.extra = &(struct ptp_ocp_i2c_info) {
 			.name = "xiic-i2c",
 			.fixed_rate = 50000000,
+			.data_size = sizeof(struct xiic_i2c_platform_data),
+			.data = &(struct xiic_i2c_platform_data) {
+				.num_devices = 2,
+				.devices = (struct i2c_board_info[]) {
+					{ I2C_BOARD_INFO("24c02", 0x50) },
+					{ I2C_BOARD_INFO("24mac402", 0x58),
+					  .platform_data = "mac" },
+				},
+			},
 		},
 	},
 	{
@@ -919,78 +960,88 @@ ptp_ocp_tod_gnss_name(int idx)
 	return gnss_name[idx];
 }
 
-static int
-ptp_ocp_firstchild(struct device *dev, void *data)
-{
-	return 1;
-}
+struct ptp_ocp_nvmem_match_info {
+	struct ptp_ocp *bp;
+	const void * const tag;
+};
 
 static int
-ptp_ocp_read_i2c(struct i2c_adapter *adap, u8 addr, u8 reg, u8 sz, u8 *data)
+ptp_ocp_nvmem_match(struct device *dev, const void *data)
 {
-	struct i2c_msg msgs[2] = {
-		{
-			.addr = addr,
-			.len = 1,
-			.buf = &reg,
-		},
-		{
-			.addr = addr,
-			.flags = I2C_M_RD,
-			.len = 2,
-			.buf = data,
-		},
-	};
-	int err;
-	u8 len;
+	const struct ptp_ocp_nvmem_match_info *info = data;
 
-	/* xiic-i2c for some stupid reason only does 2 byte reads. */
-	while (sz) {
-		len = min_t(u8, sz, 2);
-		msgs[1].len = len;
-		err = i2c_transfer(adap, msgs, 2);
-		if (err != msgs[1].len)
-			return err;
-		msgs[1].buf += len;
-		reg += len;
-		sz -= len;
-	}
+	dev = dev->parent;
+	if (!i2c_verify_client(dev) || info->tag != dev->platform_data)
+		return 0;
+
+	while ((dev = dev->parent))
+		if (dev->driver && !strcmp(dev->driver->name, KBUILD_MODNAME))
+			return info->bp == dev_get_drvdata(dev);
 	return 0;
 }
 
-static void
-ptp_ocp_get_serial_number(struct ptp_ocp *bp)
+static inline struct nvmem_device *
+ptp_ocp_nvmem_device_get(struct ptp_ocp *bp, const void * const tag)
 {
-	struct i2c_adapter *adap;
-	struct device *dev;
-	int err;
+	struct ptp_ocp_nvmem_match_info info = { .bp = bp, .tag = tag };
+
+	return nvmem_device_find(&info, ptp_ocp_nvmem_match);
+}
+
+static inline void
+ptp_ocp_nvmem_device_put(struct nvmem_device **nvmemp)
+{
+	if (*nvmemp != NULL) {
+		nvmem_device_put(*nvmemp);
+		*nvmemp = NULL;
+	}
+}
+
+static void
+ptp_ocp_read_eeprom(struct ptp_ocp *bp)
+{
+	const struct ptp_ocp_eeprom_map *map;
+	struct nvmem_device *nvmem;
+	const void *tag;
+	int ret;
 
 	if (!bp->i2c_ctrl)
 		return;
 
-	dev = device_find_child(&bp->i2c_ctrl->dev, NULL, ptp_ocp_firstchild);
-	if (!dev) {
-		dev_err(&bp->pdev->dev, "Can't find I2C adapter\n");
-		return;
+	tag = NULL;
+	nvmem = NULL;
+
+	for (map = bp->eeprom_map; map->len; map++) {
+		if (map->tag != tag) {
+			tag = map->tag;
+			ptp_ocp_nvmem_device_put(&nvmem);
+		}
+		if (!nvmem) {
+			nvmem = ptp_ocp_nvmem_device_get(bp, tag);
+			if (!nvmem)
+				goto out;
+		}
+		ret = nvmem_device_read(nvmem, map->off, map->len,
+					BP_MAP_ENTRY_ADDR(bp, map));
+		if (ret != map->len)
+			goto read_fail;
 	}
 
-	adap = i2c_verify_adapter(dev);
-	if (!adap) {
-		dev_err(&bp->pdev->dev, "device '%s' isn't an I2C adapter\n",
-			dev_name(dev));
-		goto out;
-	}
-
-	err = ptp_ocp_read_i2c(adap, 0x58, 0x9A, 6, bp->serial);
-	if (err) {
-		dev_err(&bp->pdev->dev, "could not read eeprom: %d\n", err);
-		goto out;
-	}
-
-	bp->has_serial = true;
+	bp->has_eeprom_data = true;
 
 out:
-	put_device(dev);
+	ptp_ocp_nvmem_device_put(&nvmem);
+	return;
+
+read_fail:
+	dev_err(&bp->pdev->dev, "could not read eeprom: %d\n", ret);
+	goto out;
+}
+
+static int
+ptp_ocp_firstchild(struct device *dev, void *data)
+{
+	return 1;
 }
 
 static struct device *
@@ -1109,16 +1160,29 @@ ptp_ocp_devlink_info_get(struct devlink *devlink, struct devlink_info_req *req,
 			return err;
 	}
 
-	if (!bp->has_serial)
-		ptp_ocp_get_serial_number(bp);
-
-	if (bp->has_serial) {
-		sprintf(buf, "%pM", bp->serial);
-		err = devlink_info_serial_number_put(req, buf);
-		if (err)
-			return err;
+	if (!bp->has_eeprom_data) {
+		ptp_ocp_read_eeprom(bp);
+		if (!bp->has_eeprom_data)
+			return 0;
 	}
 
+	sprintf(buf, "%pM", bp->serial);
+	err = devlink_info_serial_number_put(req, buf);
+	if (err)
+		return err;
+
+	err = devlink_info_version_fixed_put(req,
+			DEVLINK_INFO_VERSION_GENERIC_BOARD_MANUFACTURE,
+			bp->board_mfr);
+	if (err)
+		return err;
+
+	err = devlink_info_version_fixed_put(req,
+			DEVLINK_INFO_VERSION_GENERIC_BOARD_ID,
+			bp->board_id);
+	if (err)
+		return err;
+
 	return 0;
 }
 
@@ -1412,6 +1476,7 @@ static int
 ptp_ocp_fb_board_init(struct ptp_ocp *bp, struct ocp_resource *r)
 {
 	bp->flash_start = 1024 * 4096;
+	bp->eeprom_map = fb_eeprom_map;
 
 	ptp_ocp_tod_init(bp);
 	ptp_ocp_nmea_out_init(bp);
@@ -1810,8 +1875,8 @@ serialnum_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct ptp_ocp *bp = dev_get_drvdata(dev);
 
-	if (!bp->has_serial)
-		ptp_ocp_get_serial_number(bp);
+	if (!bp->has_eeprom_data)
+		ptp_ocp_read_eeprom(bp);
 
 	return sysfs_emit(buf, "%pM\n", bp->serial);
 }
-- 
2.31.1

Powered by blists - more mailing lists