| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220304094401.31375-7-arun.ramadoss@microchip.com>
Date: Fri, 4 Mar 2022 15:14:01 +0530
From: Arun Ramadoss <arun.ramadoss@...rochip.com>
To: <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>
CC: Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
Jakub Kicinski <kuba@...nel.org>,
"David S . Miller" <davem@...emloft.net>,
<UNGLinuxDriver@...rochip.com>
Subject: [PATCH net-next 6/6] net: phy: added ethtool master-slave configuration support
To configure the T1 phy as master or slave using the ethtool -s <dev>
master-slave <forced-master/forced-slave>, the config_aneg and read
status functions are added.
Signed-off-by: Prasanna Vengateshan <prasanna.vengateshan@...rochip.com>
Signed-off-by: Arun Ramadoss <arun.ramadoss@...rochip.com>
---
drivers/net/phy/microchip_t1.c | 90 ++++++++++++++++++++++++++++++++++
1 file changed, 90 insertions(+)
diff --git a/drivers/net/phy/microchip_t1.c b/drivers/net/phy/microchip_t1.c
index 6a7836c2961a..8292f7305805 100644
--- a/drivers/net/phy/microchip_t1.c
+++ b/drivers/net/phy/microchip_t1.c
@@ -79,6 +79,9 @@
#define T1_EQ_WT_FD_LCK_FRZ_CFG 0x6D
#define T1_PST_EQ_LCK_STG1_FRZ_CFG 0x6E
+#define T1_MODE_STAT_REG 0x11
+#define T1_LINK_UP_MSK BIT(0)
+
#define DRIVER_AUTHOR "Nisar Sayed <nisar.sayed@...rochip.com>"
#define DRIVER_DESC "Microchip LAN87XX/LAN937x T1 PHY driver"
@@ -671,6 +674,89 @@ static int lan87xx_cable_test_get_status(struct phy_device *phydev,
return 0;
}
+static int lan87xx_read_master_slave(struct phy_device *phydev)
+{
+ int rc = 0;
+
+ phydev->master_slave_get = MASTER_SLAVE_CFG_UNKNOWN;
+ phydev->master_slave_state = MASTER_SLAVE_STATE_UNKNOWN;
+
+ rc = phy_read(phydev, MII_CTRL1000);
+ if (rc < 0)
+ return rc;
+
+ if (rc & CTL1000_AS_MASTER)
+ phydev->master_slave_get = MASTER_SLAVE_CFG_MASTER_FORCE;
+ else
+ phydev->master_slave_get = MASTER_SLAVE_CFG_SLAVE_FORCE;
+
+ rc = phy_read(phydev, MII_STAT1000);
+ if (rc < 0)
+ return rc;
+
+ if (rc & LPA_1000MSRES)
+ phydev->master_slave_state = MASTER_SLAVE_STATE_MASTER;
+ else
+ phydev->master_slave_state = MASTER_SLAVE_STATE_SLAVE;
+
+ return rc;
+}
+
+static int lan87xx_read_status(struct phy_device *phydev)
+{
+ int rc = 0;
+
+ rc = phy_read(phydev, T1_MODE_STAT_REG);
+ if (rc < 0)
+ return rc;
+
+ if (rc & T1_LINK_UP_MSK)
+ phydev->link = 1;
+ else
+ phydev->link = 0;
+
+ phydev->speed = SPEED_UNKNOWN;
+ phydev->duplex = DUPLEX_UNKNOWN;
+ phydev->pause = 0;
+ phydev->asym_pause = 0;
+
+ rc = lan87xx_read_master_slave(phydev);
+ if (rc < 0)
+ return rc;
+
+ rc = genphy_read_status_fixed(phydev);
+ if (rc < 0)
+ return rc;
+
+ return rc;
+}
+
+static int lan87xx_config_aneg(struct phy_device *phydev)
+{
+ u16 ctl = 0;
+ int rc;
+
+ switch (phydev->master_slave_set) {
+ case MASTER_SLAVE_CFG_MASTER_FORCE:
+ ctl |= CTL1000_AS_MASTER;
+ break;
+ case MASTER_SLAVE_CFG_SLAVE_FORCE:
+ break;
+ case MASTER_SLAVE_CFG_UNKNOWN:
+ case MASTER_SLAVE_CFG_UNSUPPORTED:
+ return 0;
+ default:
+ phydev_warn(phydev, "Unsupported Master/Slave mode\n");
+ return -EOPNOTSUPP;
+ }
+
+ rc = phy_modify_changed(phydev, MII_CTRL1000, CTL1000_AS_MASTER, ctl);
+ if (rc == 1)
+ rc = genphy_soft_reset(phydev);
+
+ return rc;
+}
+
static struct phy_driver microchip_t1_phy_driver[] = {
{
PHY_ID_MATCH_MODEL(PHY_ID_LAN87XX),
@@ -682,6 +768,8 @@ static struct phy_driver microchip_t1_phy_driver[] = {
.handle_interrupt = lan87xx_handle_interrupt,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ .config_aneg = lan87xx_config_aneg,
+ .read_status = lan87xx_read_status,
.cable_test_start = lan87xx_cable_test_start,
.cable_test_get_status = lan87xx_cable_test_get_status,
},
@@ -692,6 +780,8 @@ static struct phy_driver microchip_t1_phy_driver[] = {
.config_init = lan87xx_config_init,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ .config_aneg = lan87xx_config_aneg,
+ .read_status = lan87xx_read_status,
.cable_test_start = lan87xx_cable_test_start,
.cable_test_get_status = lan87xx_cable_test_get_status,
}
--
2.33.0
Powered by blists - more mailing lists