netdev - [PATCH net-next v2 4/7] net: axienet: don't set IRQ timer when IRQ delay not used

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220305002305.1710462-5-robert.hancock@calian.com>
Date:   Fri,  4 Mar 2022 18:23:02 -0600
From:   Robert Hancock <robert.hancock@...ian.com>
To:     netdev@...r.kernel.org
Cc:     radhey.shyam.pandey@...inx.com, davem@...emloft.net,
        kuba@...nel.org, michal.simek@...inx.com, linux@...linux.org.uk,
        daniel@...earbox.net, linux-arm-kernel@...ts.infradead.org,
        Robert Hancock <robert.hancock@...ian.com>
Subject: [PATCH net-next v2 4/7] net: axienet: don't set IRQ timer when IRQ delay not used

When the RX or TX coalesce count is set to 1, there's no point in
setting the delay timer value since an interrupt will already be raised
on every packet, and the delay interrupt just causes extra pointless
interrupts.

Signed-off-by: Robert Hancock <robert.hancock@...ian.com>
---
 .../net/ethernet/xilinx/xilinx_axienet_main.c  | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index d705b62c3958..b374800279e7 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -236,14 +236,24 @@ static void axienet_dma_start(struct axienet_local *lp)
 
 	/* Start updating the Rx channel control register */
 	rx_cr = (lp->coalesce_count_rx << XAXIDMA_COALESCE_SHIFT) |
-		(XAXIDMA_DFT_RX_WAITBOUND << XAXIDMA_DELAY_SHIFT) |
-		XAXIDMA_IRQ_ALL_MASK;
+		XAXIDMA_IRQ_IOC_MASK | XAXIDMA_IRQ_ERROR_MASK;
+	/* Only set interrupt delay timer if not generating an interrupt on
+	 * the first RX packet. Otherwise leave at 0 to disable delay interrupt.
+	 */
+	if (lp->coalesce_count_rx > 1)
+		rx_cr |= (XAXIDMA_DFT_RX_WAITBOUND << XAXIDMA_DELAY_SHIFT) |
+			 XAXIDMA_IRQ_DELAY_MASK;
 	axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, rx_cr);
 
 	/* Start updating the Tx channel control register */
 	tx_cr = (lp->coalesce_count_tx << XAXIDMA_COALESCE_SHIFT) |
-		(XAXIDMA_DFT_TX_WAITBOUND << XAXIDMA_DELAY_SHIFT) |
-		XAXIDMA_IRQ_ALL_MASK;
+		XAXIDMA_IRQ_IOC_MASK | XAXIDMA_IRQ_ERROR_MASK;
+	/* Only set interrupt delay timer if not generating an interrupt on
+	 * the first TX packet. Otherwise leave at 0 to disable delay interrupt.
+	 */
+	if (lp->coalesce_count_tx > 1)
+		tx_cr |= (XAXIDMA_DFT_TX_WAITBOUND << XAXIDMA_DELAY_SHIFT) |
+			 XAXIDMA_IRQ_DELAY_MASK;
 	axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, tx_cr);
 
 	/* Populate the tail pointer and bring the Rx Axi DMA engine out of
-- 
2.31.1